Anatoliy Vorobev
Has grant
Lecturer
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Recent Grants
Grant: Close
PORE-LEVEL NETWORK MODELLING OF THE MISCIBLE DISPLACEMENT
Open Date: 2009-08-16
Close Date: 2012-08-15
Grant: Close
UK Turbulence Consortium
Open Date: 2009-07-18
Close Date: 2014-07-17
Articles (12)
Year:
2026
Year:
2026
Year:
2026
We analyse liquid‑metal (LM) blanket designs for the Tokamak Energy (TE) ST‑E1 spherical tokamak power plant, with the aim of improving thermal efficiency and reducing pumping losses relative to the TE base design—a He‑cooled Li blanket. Specifically, we consider two promising alternative LM blanket concepts. First, we examine the feasibility of a dual‑cooled Li blanket, in which surface heat is removed by He flowing through channels in the first wall, while volumetric heat is removed by flowing Li, which also serves as the tritium breeder. The blanket is subdivided into several flow channels, and an efficient flow arrangement is proposed to achieve a nearly uniform outlet temperature. The analysis indicates that the total magnetohydrodynamic (MHD) pressure drop associated with this configuration is approximately 0.2–0.5 MPa, depending on the internal flow arrangement. Second, we investigate a self‑cooled Li blanket, in which both surface and volumetric heat are removed solely by the Li flow. In this concept, Li is first pumped through a thin, high‑velocity slot adjacent to the first wall to remove surface heat, and is then redirected to flow slowly through the poloidal channels in the main breeding zone. We show that the additional MHD pressure drop associated with the slotted‑channel flow in the first wall is small, on the order of 0.1 MPa. The overall MHD pressure drop remains well below the upper design limit of 2 MPa, primarily because, in ST‑E1, the blanket is located exclusively in the outboard region, where the magnetic field is relatively weak (approximately 3 T).
Year:
2026
A numerical model for practical simulation of hydrotreatment of vacuum gas oil in a trickle-bed reactor is developed. The model is based on the mass balance of species; it incorporates a seven-lump chemical scheme that describes the reactions of hydrodesulphurisation and hydrodearomatisation, the accuracy of calculations using the model is no less than 93.7%. The novelty of the model is splitting of sulphur-containing compounds into different lumps by their reactive abilities. The splitting is supported by the chromatographic analysis of hydrocarbon mixtures that are sampled from the inlet and outlet ends of an industrial hydrotreatment unit. The analysis reveals different susceptibilities of sulphides, benzothiophene, and dibenzothiophenes to hydrotreatment. The new model is applied for simulation of the hydrotreatment at a refinery, adjusting kinetic parameters, and demonstrating that the model provides an adequate (and, at the same time, simple) description of the process, giving guidance for optimisation that is needed after each variation of the feedstock. Using the kinetic model, it is found that an increase in temperature from 330 to 390 °C leads to a decrease in the content of aromatic compounds in hydrotreated vacuum gas oil by 20.75%, and sulphur compounds by 92%. It has been established that an increase in the hydrogen consumption from 50,000 to 90,000 nm 3 /h leads to a decrease in the sulphur content in the product by 3%. When the feedstock consumption rise from 100 to 150 m 3 /h, the desulphurization depth decreases by 6.5%.
Year:
2025
Year:
2023
Year:
2022
Year:
2022
Year:
2022
Year:
2021
Year:
2020
Year:
2020
Collaborators (4)
Daniel Suarez
Teaching Associate Professor
University of Tennessee
Deepa Gupta
Associate Research Scientist
Princeton University Plasma Physics Laboratory
S. Smolentsev
Oak Ridge National Laboratory
Emre Yildirim
University of Manchester
Make your next move.
Prepare your application
Review drafts before you send them.