Bartosz Wieczorek

Poznan University of Technology

Research Interests

Explore related searches

Articles (20)

Collaborators (12)

Piotr Krawiec

Poznan University of Technology

Bolesław Karwat

Akademia Górniczo-Hutnicza im Stanislawa Staszica w Krakowie

Emilia Konował

Poznan University of Technology

Łukasz Gierz

Assistant professor

Politechnika Gdanska

Jerzy Majka

assistant professor

University of Life Sciences in Poznań

Łukasz Warguła

Poznan University of Technology

Grzegorz Kinal

Poznan University of Technology

Mateusz Kukla

Assistant professor

Politechnika Gdanska

Maciej Sydor

University of Life Sciences in Poznań

Mariola Robakowska

Częstochowa University of Technology

Dominik Rybarczyk

Poznan University of Technology

Jan Górecki

Assistant Professor

Poznan University of Technology

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Bartosz Wieczorek

Research Interests

Explore related searches

Articles (20)

Collaborators (12)

Piotr Krawiec

Bolesław Karwat

Emilia Konował

Łukasz Gierz

Jerzy Majka

Łukasz Warguła

Grzegorz Kinal

Mateusz Kukla

Maciej Sydor

Mariola Robakowska

Dominik Rybarczyk

Jan Górecki

Make your next move.

Bartosz Wieczorek

Research Interests

Explore related searches

Articles (20)

Slip Risk on Surfaces Made with 3D Printing Technology

Anti-slip properties of thermally modified hardwoods

Research on the design of a non-commercial impulse compressed air supply system for the turbocharger of a spark-ignition internal combustion engine

Characteristics of factors affecting axle load and friction forces in a wheelchair

Optimization of Vertical Ultrasonic Attenuator Parameters for Reducing Exhaust Gas Smoke of Compression–Ignition Engines: Efficient Selection of Emitter Power, Number, and Spacing

Tire Deformation-Based Regulation of Braking Torque in Manual Wheelchairs Equipped with Reverse Locking Modules

The study of the impact of oil type and throttling pressure on the vibrations of a gear pump

Assessment of the Hazards Occurring During the Thermal Decomposition and Combustion Process in a Toothed Belt Transmission

The carbon dioxide emission balance and ability to chip wood by 10 kW machines used in urban areas in terms of increasing interest in using wood biomass resources for personal use

Critical Concerns Regarding the Transition from E5 to E10 Gasoline in the European Union, Particularly in Poland in 2024—A Theoretical and Experimental Analysis of the Problem of Controlling the Air–Fuel Mixture Composition (AFR) and the λ Coefficient

Considerations for the Design of a Wheelchair Dynamometer Concerning a Dedicated Braking System

Influence of a Hybrid Manual–Electric Wheelchair Propulsion System on the User’s Muscular Effort

Lignin and Starch Derivatives with Selenium Nanoparticles for the Efficient Reduction of Dyes and as Polymer Fillers

Comparative Analysis of Strength Fatigue Properties and Abrasive Wear Resistance for a New Composition of Polymer Concrete Coated with Metal Alloy Powders

Effect of the Volumetric Flow Rate Measurement Methodology of Positive Pressure Ventilators on the Parameters of the Drive Unit

Manual Wheelchair Equipped with a Planetary Gear-Research Methodology and Preliminary Results

Describing a Set of Points with Elliptical Areas: Mathematical Description and Verification on Operational Tests of Technical Devices

Energy consumption of the wood size reduction processes with employment of a low-power machines with various cutting mechanisms

The Wheelchair Propulsion Wheel Rotation Angle Function Symmetry in the Propelling Phase: Motion Capture Research and a Mathematical Model

Case study: Influence of the Mechanical and Electrical Anti-rollback System for Wheelchair When Climbing a Hill

Collaborators (12)

Piotr Krawiec

Bolesław Karwat

Emilia Konował

Łukasz Gierz

Jerzy Majka

Łukasz Warguła

Grzegorz Kinal

Mateusz Kukla

Maciej Sydor

Mariola Robakowska

Dominik Rybarczyk

Jan Górecki

Make your next move.