Beniamino Russo

Urban pluvial floods can be produced or exacerbated by an insufficient density of inlets or by their poor hydraulic efficiency. Therefore, proper consideration of the hydraulic performance of inlets is essential to guarantee the correct functioning of urban drainage systems during heavy storm events. Recent advances in computational analysis in the field of hydrodynamics modelling allow the use of the well-known concept of dual drainage for design and planning purposes by simulating flow transfers between the surface layer (streets) and underground layers (sewers) through a proper hydraulic characterisation of inlet efficiency. Powerful commercial software packages allow simulations of flow transfer and use different approaches and formulas. Many of these approaches include the possibility of treating a sewer inlet as an orifice. In this context, this paper presents a methodology to obtain orifice discharge coefficients for three inlets previously tested at the hydraulics laboratory of the Technical University of Catalonia. Discharge coefficients of 0.18–0.58 were obtained for Froude numbers of 1.12–4.40, quite far from the usual recommended values. The proposed procedure can also be applied to non-tested grates.