BYOUNG HOOI CHO

Assistant Professor

Kyunghee University
Country flagSouth Korea

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

About

BYOUNG HOOI CHO is an Assistant Professor at Sangmyung University in South Korea. His research areas include the mechanical characterization of composite materials, the utilization of recycled materials in construction, and the evaluation of pavement performance through innovative techniques. Recent articles authored by Professor Cho address topics such as graphene oxide applications in concrete, fly ash geopolymer effects, and maintenance strategies for concrete infrastructures.

Articles (16)

The dynamic characteristics of bridges are not only influenced by structural damage but also by ambient environmental variations. If environmental factors are not incorporated into the detection algorithm, they may lead to false positives or false negatives. In recent years, vibration-based damage detection methods have gained significant attention in structural health monitoring (SHM), particularly for assessing structural integrity under varying temperature conditions. This study introduces a deep-learning framework for identifying damage in composite bridges by utilizing both time-domain and frequency-domain vibration signals while explicitly accounting for temperature effects. Two deep learning models—Convolutional Neural Network (CNN) and Artificial Neural Network (ANN)—were implemented and compared. The effectiveness of the proposed damage identification approach was evaluated using an experimental dataset obtained from a composite bridge structure. Furthermore, statistical evaluation metrics—including accuracy, precision, recall, F1 score, and the ROC curve—were used to compare the damage detection performance of the two deep learning models. The results reveal that the CNN model consistently outperforms the ANN in terms of classification accuracy. Moreover, frequency-domain analysis was shown to be more effective than time-domain analysis for damage classification, and integrating temperature data with vibration signals improved the performance of all model architectures.

Year:

2026

This study presents a comprehensive numerical investigation into the dynamic response of railway precast concrete slab track (PST) systems subjected to various interlayer gap conditions. Key parameters including gap width, depth, and location were examined, along with the geometric configuration of the grouting layer, comparing current (as-is) and earlier (as-was) models. A conservative modeling approach was adopted, assuming fully unbonded interfaces and delamination gap depths extending to the shear key, with dynamic loading applied. Results showed that the maximum principal stress in both the slab and grouting layer increased with larger gap widths but stabilize beyond specific thresholds. In the as-is model, stress levels remained below reference flexural tensile strength, indicating a low risk of cracking. However, the as-was model exhibited grouting layer stresses exceeding the allowable limit at the gap widths near 4 mm and approaching critical levels even at 1.5 mm. Stress responses also varied depending on whether gaps were located at the slab–grouting layer or grouting layer–hydraulic stabilized basecourse (HSB) interfaces. Based on the examinations, allowable interlayer gap width criteria were proposed to support maintenance decisions. The study provides a rational framework for monitoring and managing interlayer gaps, enhancing resistance to early fatigue cracking and structural integrity of PST systems under dynamic railway loads.

Year:

2026

In this study, edge-oxidized graphene oxide (EOGO) was used as an additive in fly ash (FA) geopolymer paste. The effect of EOGO on the properties of the fly ash geopolymer was investigated. EOGO was added to the FA geopolymer at four different percentages (0%, 0.1%, 0.5% and 1%), and the mixture was cured under two different conditions: room curing (~20 °C) and heat curing (~60 °C). To characterize the FA-EOGO geopolymer, multiple laboratory tests were employed, including compressive strength, Free-Free Resonance Column (FFRC), density, water absorption, and setting tests. The FFRC test was used to evaluate the stiffness at small strain (Young’s modulus) via the resonance of the specimen. The mechanical test results showed that the strength and elastic modulus were high during heat curing, and the highest compressive strength and elastic modulus were achieved at 0.1% EOGO. In the physical test, 0.1% EOGO had the highest density and the lowest porosity and water absorption. As a result of the setting time test, as the EOGO content increased, the setting time was shortened. It is concluded that the optimum proportion of EOGO is 0.1% in FA geopolymer paste.

Year:

2025

Composite bridges are typically exposed to temperature variations due to heat radiation, conduction, and convection. Temperature affects the modal parameters of bridges, hindering the application of damage detection methods based on the dynamic properties of bridges. In this study, the effects of temperature on the natural frequencies of composite bridges were investigated experimentally and numerically to derive a basis for separating temperature effects from the natural frequencies. A temperature-controllable girder specimen was developed for modal testing. Additionally, finite element (FE) analysis was conducted to analyze the effects of temperature. The FE analysis results were validated by comparing them to the static response results of the test specimen. The results of the experiments and FE simulations verified that temperature variation can affect the material properties, particularly the modulus of elasticity, of a composite girder, consequently influencing its natural frequency. Based on the tests and simulations, a linear relationship between the temperature and the natural frequency was proposed to remove the temperature effects from the natural frequency.

Year:

2024

This study investigates the effects of strontium ions on enhancing the post-hardening strength and durability characteristics of hydrated cement composites, exploring their potential use as a rehabilitation method for aging concrete structures. A 30% strontium nitrate solution served as the source of strontium ions. Cement paste specimens with a water-to-cement ratio of 0.5, cured for 28 days, were submerged in the 30% strontium nitrate solution to facilitate strontium ion penetration. Compressive and flexural strength tests were conducted on the specimens and compared to those cured in deionized water. Moreover, the durability performance, including surface abrasion resistance, water sorptivity, and porosity, was examined. Scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and X-ray diffractometry (XRD) analyses were also carried out to investigate the microscopic morphology and chemical characteristics of the specimens. Results indicated that the strontium-treated specimens exhibited notable enhancements in both compressive and flexural strengths, especially in flexural strength. The specimens also demonstrated improved surface abrasion resistance, decreased water absorption, and a marked reduction in porosity. SEM analysis revealed a densified microstructure in the strontium-treated cement paste specimens, and EDS and XRD analyses showed changes in their morphology and chemical compositions and structures, indicating the formation of new types of hydrates. Accordingly, this study suggests that the strontium ion treatment method has significant potential for the maintenance and restoration of aging cementitious materials.

Year:

2024

This study investigates the synergistic effects of incorporating graphene oxide (GO) and polyvinyl alcohol (PVA) fibers into cement paste mixtures, aiming to modify their rheological properties and flexural behaviors with resistance to crack formation. The relationship between static yield stress and critical shear strain was examined in ten cement paste mixtures with varying concentrations of 6 mm and 12 mm PVA fibers and 0.05% GO. Additionally, viscosity analyses were performed. For the specimens fabricated from these mixtures, flexural strength tests were conducted using the Digital Image Correlation (DIC) technique for precise strain analysis under load history. The results indicated a significant increase in static yield stress, viscosity, and critical shear strain due to the combined addition of GO and PVA fibers, more so than when added individually. Notably, in PVA fiber-reinforced cement mixtures, the integration of GO increased the crack initiation load by up to 23% and enhanced pre-crack strain by 30 to 50%, demonstrating a notable delay in crack initiation and a reduction in crack propagation. Microstructural analyses using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) revealed a concentrated presence of GO around and on the PVA fibers. This promotes increased C-S-H gel formation, resulting in a denser microstructure. Additionally, GO effectively interacts with PVA fibers, enhancing the adherence of hydration products at their interface.

Year:

2024

This study examines the strategic incorporation of various recycled materials into asphalt concrete, specifically focusing on municipal solid waste incineration bottom ash (MSWI BA), recycled asphalt shingle (RAS), and recycled concrete aggregate (RCA). Due to the high porosity of MSWI BA and RCA, and the significant asphalt binder content (30–40%) found in RAS, there is a need to increase the amount of liquid asphalt used. RAS is posited as an efficient substitute for the asphalt binder, helping to counterbalance the high absorption characteristics of MSWI BA and RCA. The research objective is to quantitatively evaluate the effect of the combined use of RAS, MSWI BA, and RCA in Hot Mix Asphalt (HMA). This study encompasses several laboratory evaluations (i.e., rutting and tensile strength tests) and a cost–benefit analysis, which is a life cycle cost analysis. The results indicate that the combined use of these materials results in a higher tensile strength and rut resistance when compared with the control (with virgin aggregate). According to the cost–benefit analysis result, when the three recycled materials are used for an HMA overlay over an existing aged pavement, it could be 60–80% more cost-effective compared to a conventional HMA overlay, thereby offering significant economical savings each year in the field of road construction.

Year:

2024

Year:

2023

Year:

2022

Year:

2022

Year:

2022

Year:

2021

Year:

2020

Year:

2020

Year:

2020

Year:

2020

Collaborators (3)

Heejung Youn

Professor

Hongik University

SOUTH KOREA
View details

Jae Yeol Song

Assistant Professor

Korea Maritime and Ocean University

SOUTH KOREA
View details

Janghwan Kim

Changwon National University

SOUTH KOREA
View details