C. Ahamed Saleel

In many engineering systems, hybrid and nanofluids are influenced by their respective thermophysical characteristics. Lately, several models have been envisaged to foresee the hybrid and nanofluid attributes. The properties of hybrid nanofluids (HNFs) as potential heat transfer fluids are controlled by numerous aspects such as solid part size, volume fraction, and temperature. Considering the interesting facts of the hybrid and nanofluid flows, we in this exploration examined the thermal performance comparison of both types of fluid flows. The nanofluid and HNF are composed of molybdenum disulfide (MoS[Formula: see text]/kerosene oil and silicon dioxide–molybdenum disulfide (SiO 2 –MoS[Formula: see text]/kerosene oil, respectively. The flows are taken in a canonical gap between the cone and the disk. Both the cone and the disk may be rotating or stationary. The novelty of the computational model is enhanced by discussing the effects of viscous dissipation, Joule heating, and the variable thermal conductivity with convective condition. The Tawari and Das model is designed to analyze the heat transfer performance of the assumed fluid flows. The assumed fluid model is transmuted into the set of differential equations that are dealt numerically with the bvp4c MATLAB approach. The results are displayed in tables and graphical forms. For elevating estimations of the Eckert number, the heat transmission rate is found to be more significant in the disk than cone. It is also learned that hybrid nanoliquid heat transfer performance outperforms nanoliquid. The fluid velocity increases by raising the nanoparticle volume fraction [Formula: see text], and is decreasing for a higher magnetic field parameter. With the elevating estimates of thermal conductivity, it is shown that the cone transmits heat more quickly whereas the disc transmits heat more slowly. The thermal conductivity parameter increases the probability of collision of the liquid particles, that ultimately upsurges fluid heat transmission rate.

In this work, the impact of the serpentine copper tube heat exchanger with nanofluids on 100 W solar photovoltaic thermal collectors (PV/T) was analyzed experimentally and numerically. The cooling fluids assessed in this system were distilled water, Al2O3 0.1%, and Al2O3 0.2% based nanofluids. Tests were accomplished at diverse coolant mass flow rate in India’s summer days of 2018. A computational fluid dynamics (CFD) investigation was carried out to perform a parametric study, identify surface and exit T profiles, and examine the cooling effectiveness. The impact of mass flow rate of nanofluid on the outside T and Reynolds number were studied. The Reynolds number obtained in the flow experiments and CFD analysis was in the range of 900–1,300. The maximum irreversibility occurred while using water, whereas minimum irreversibility obtained Al2O3 0.2% nanofluid. Exergy efficiency was found to be increased from 20% to 36% during the day. It was identified that the increase in PV/T scheme led to higher exergy losses. The thermal efficiency of a water-based cooling system resulted in 53.61%. Meanwhile, Al2O3 0.1% and Al2O3 0.2% based coolants provided 69.45% and 71.02%, respectively. A good agreement was obtained between the experimental results and the computer model.