Claire Baffaut
Research Hydrologist
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (12)
Year:
2026
Model projections predict increasing temperatures and precipitation change in many locations in the Central United States. To provide perspective on what these trends might bring relative to what has already happened, we compared historical temperature and precipitation change with what models from the Coupled Model Intercomparison Project (CMIP6) predict. The analysis focuses on regions represented by five long‐term agroecosystem research sites along a latitudinal transect from Michigan to Iowa, Missouri, Oklahoma, and Mississippi. We analyzed trends in long‐term records (≥50 years) of precipitation and temperature data at annual and monthly scales using indicators that characterize extreme and average temperature and rainfall amounts. Results show that temperatures have changed from 1900 to 2020, more for minimum (0.1°C–0.3°C decade −1 ) than maximum (−0.1°C–0.2°C decade −1 ), more for winter (−0.1°C–0.3°C decade −1 ) than summer (−0.1°C–0.1°C decade −1 ), and more often in the north than in the south. Except in Mississippi, annual precipitation has increased at rates of 25 mm decade −1 or greater over 1950–2020, but monthly trends were inconsistent. Projected trends suggest continued temperature increases, highlighting the urgent need for research on management systems that are resilient to such increases.
Year:
2025
Year:
2025
While environmental factors may contribute to antimicrobial resistance (AMR) in bacteria, many aspects of environmental antibiotic pollution and resistance remain unknown. Furthermore, the level of AMR in Escherichia coli is considered a reliable indicator of the selection pressure exerted by antimicrobial use in the environment. This study aimed to assess AMR variance in E. coli isolated from diverse environmental samples, such as animal feces and water from wastewater treatment plants (WWTPs) and drainage areas of different land use systems in Central Virginia. In total, 450 E. coli isolates obtained between August 2020 and February 2021 were subjected to susceptibility testing against 12 antimicrobial agents approved for clinical use by the U.S. Food and Drug Administration. Approximately 87.8% of the tested isolates were resistant to at least one antimicrobial agent, with 3.1% showing multi-drug resistance. Streptomycin resistance was the most common (73.1%), while susceptibility to chloramphenicol was the highest (97.6%). One isolate obtained from WWTPs exhibited resistance to seven antimicrobials. AMR prevalence was the highest in WWTP isolates, followed by isolates from drainage areas, wild avians, and livestock. Among livestock, horses had the highest AMR prevalence, while cattle had the lowest. No significant AMR difference was found across land use systems. This study identifies potential AMR hotspots, emphasizing the environmental risk for antimicrobial resistant E. coli. The findings will aid policymakers and researchers, highlighting knowledge gaps in AMR–environment links. This nationally relevant research offers a scalable AMR model for understanding E. coli ecology. Further large-scale research is crucial to confirm the environmental impacts on AMR prevalence in bacteria.
Year:
2024
Snow plays an important role in the hydrological and energy cycles. In agroecosystems, snow may be a beneficial source of plant-available water, a harmful source of flooding, a source of irrigation water supply (i.e., mountain snowpack filling reservoirs), and a determinant of seasonal timing, such as the onset of the planting or growing seasons. Key snow metrics include snowfall (precipitation amount), snow water equivalent (SWE), and snow depth. Depending on the application, we may be interested in the snowfall rate of a particular storm event (e.g., 60 mm of water equivalent fell overnight, and the weight damaged crop trees) or the total amount over a season (e.g., 400 mm of total winter snowfall will provide moist spring soil). Snowfall measurement is in some ways similar to rainfall measurement, to quantify the rate (e.g., per hour or day) of precipitation through a horizontal plane (opening of a precipitation gauge). However, it is usually necessary to melt the snow within the gauge. Snowfall measurement is also susceptible to the effects of wind, which can accelerate snow laterally past the gauge opening, resulting in “undercatch.” Snow depth is the most readily observable property, requiring only a graduated stake or other simple measurement devices. However, depth does not directly convey the water content. Snow depth may increase because of new snowfall or deposition by wind. Snow depth at a point may decrease because of settling over time (often within hours), compaction by overlying snow, melting, sublimation (evaporation of ice crystals), or scouring by wind. In addition to weather, these processes are regulated by local physiographic factors, including topography (slope and aspect with regard to sun and wind), and by trees, crops, or other vegetation. Since these factors may result in high variability of snow depth over short distances, snow depth measurements in many locations at a given time point are often desirable to assess conditions in a watershed, field, or plot. Snow water equivalent is usually considered the most important metric of snowpack since it represents the water available upon melting. SWE is the product of depth and density. Density is affected by similar factors as snow depth as well as age. Freshly fallen snow often has low density that increases with time on the ground as snow crystals lose their fine edges through friction, compaction, and partial melting. This protocol describes the measurement of: ●Snow depth ●Snow water equivalent ●Snowfall ●Remote sensing and other long-term/large-scale snow products
Year:
2024
The Long‐Term Agroecosystem Research (LTAR) network is a collaborative initiative funded by the U.S. Department of Agriculture, Agricultural Research Service, aimed at advancing sustainable, resilient agriculture through coordinated research conducted on croplands, grazing lands, and integrated crop/livestock systems. Here we provide an overview of the LTAR network, highlighting its vision, mission, initiatives, recent network activities, and future directions. Network‐level research is critical for developing contextually relevant solutions to the challenges faced by agricultural producers. Long‐term data collection, stakeholder engagement, and the integration of scientific knowledge are needed to enhance agricultural productivity and its resiliency, environmental quality, profitability, and social well‐being into the future.
Year:
2024
The saturated hydraulic conductivity (Ksat) represents the speed at which a fluid can move through a porous medium, and it is a fundamental parameter that governs water flow through soil or rock. Darcy’s law governs one-dimensional flow through a porous medium: Q = Ksat (dh/dx) (Equation 1) where Q is the flux of water [m/s], Ksat is the saturated hydraulic conductivity [m/s], and dh/dx is the gradient in the hydraulic head [m/m]. More complicated forms of Darcy’s equation apply to representing three-dimensional flow in a saturated medium. Additionally, flow in an unsaturated medium, as is often the case in soil, is represented through equations such as Richards’ equation, based on Darcy’s law. Usually, the saturated hydraulic conductivity is the most important parameter governing water flow in the saturated zone. The basic idea when measuring saturated hydraulic conductivity is to saturate the medium (i.e., the soil) and measure how quickly water moves through it. This procedure can be quite simple. For example, the lab setup that formed the basis of Darcy’s experiments in the 1850s was homogenous sand placed in a tube with a known gradient in the hydraulic head so that Ksat could be calculated from Eqn. 1. The setup becomes more complicated in the field, where the soil is heterogeneous; we are typically interested in a bulk estimate of Ksat in a soil that is nonuniform and may contain soil cracks or holes from roots or worms. It is also difficult to completely saturate a soil column in the field and control the applied hydraulic gradient. The techniques presented here help account for these challenges.
Year:
2024
Soil water content, also known as soil moisture, is commonly defined as the volume of water per volume of soil (volumetric soil water content). Gravimetric soil water content is the weight of water per weight of soil. For most purposes, we speak of volumetric water content in the units of m3/m3. Soil water content usually refers to the water contained within the vadose zone of the surface soil layer. Soil water content below the saturated water content of the soil usually ranges from 0-0.5 m3/m3.
Year:
2024
Overland flow is water that flows over a land surface (sheet flow) or in rills and gullies (concentrated flow) in response to rainfall or melting snow. Measuring overland flow on croplands and rangelands is important because it represents a key water pathway that controls pollutant losses from agricultural fields. When overland flow is accurately measured along with other water inputs and outputs, scientists can develop budgets describing how water and associated pollutants traverse cropland and rangeland systems. Tracking these budgets over extended time frames (years, decades) helps quantify the beneficial effects of improved agricultural management. In many edge-of-field and small watershed studies, overland flow measurements typically involve control structures such as flumes or weirs. Several hydrology textbooks and agency manuals (USDA, USGS) provide detailed guidance on weir and flume development, installation, and operation. In general, weirs and flumes are located at the outlets of drainage areas where overland flow exits an agricultural field. The devices are sized based on the range of expected flows. In most instances, weirs and flumes have preset equations that calculate discharge (the volume of overland flow leaving a field over a given unit of time) based on measurements of water height, or stage. A wide variety of sensors are useful in measuring stage in weirs and flumes, including floats, bubblers, and pressure transducers. Stage data from these sensors are then recorded at frequent time steps (seconds to hours) to provide continuous estimates of overland flow.
Year:
2024
The potential of subsurface water measures the energy associated with position or internal conditions, thus representing the potential energy of a parcel of water (Hillel, 1998). Given the typically small flow velocity of subsurface water, its kinetic energy commonly can be assumed negligible; thus, the total potential represents the total energy status of the water parcel. Potential energy due to position depends on the location of the water parcel within the Earth’s gravitational field, and potential energy due to internal conditions depends on the temperature and solute concentration of the water parcel. Because all systems equilibrate by moving from higher to lower energy states, a difference in potential energy from one point to another drives water moving between those points. The absolute value of the potential energy of a water parcel at any given point is irrelevant to its movement. Therefore, the potential of a water parcel is defined by the specific potential energy and may be expressed in three common forms: Energy per unit mass (Φ), [L2T–2]; Energy per unit volume, [ML–1T–2], or pressure (P); and Energy per unit weight, [L], or head (H); where M, L, and T represent mass, length, and time dimensions, respectively, in a chosen unit system. Because the change in energy drives water movement, a reference state is necessary. Thus, potential is the work per unit quantity (mass, volume, or weight) required to transport an infinitesimal parcel of water reversibly and isothermally to a point of interest from a point representing a reference state for a pool of water defined by the following criteria: (1) pure water, (2) free water (not bound, i.e., adsorbed to solid phase), (3) air phase at atmospheric pressure, and (4) located at an established vertical datum (arbitrary reference elevation) (Hillel, 1998). Total potential is used to define the subsurface flow of water under saturated and unsaturated conditions. In the vadose zone, total potential is commonly called soil water potential and obtained by summing the gravitational pressure (Φg), pressure (Φp) and osmotic potentials (Φo) generated by the respective force fields acting on water. Pressure potential (Φp)results from forces acting at the air–water and water–solid interfaces and is equal to the sum of pneumatic (Φa) and matric potentials (Φm) respectively. Osmotic potential results from solutes in the soil water solution, which lower the potential energy of the soil water by reducing its vapor pressure, and, in the presence of a semipermeable membrane, produce an osmotic pressure gradient. Osmotic potential typically can be neglected for dilute soil solutions. Where the air phase pressure is equal to its reference pressure (atmospheric pressure), as often is the case for a well-aerated subsurface, the pneumatic potential is zero. Therefore, for a dilute soil solution in a well-aerated porous medium, soil water potential (total potential) is equal to the sum of gravitational and matric potentials, making Φm measurements a prerequisite for predicting water movement in the subsurface. Matric potential represents the specific potential energy attributable to capillary and adsorptive forces, i.e., the total effect resulting from the affinity of water to the whole soil matrix (pores and particle surfaces). The values of Φp and Φm (where Φa= 0) are negative above a free water surface and thus are negative at elevations above the water table. Sometimes, the terms suction or tension are used to treat these potentials as positive values above the water table.
Year:
2024
Year:
2024
Year:
2024
Collaborators (2)
Chyer Kim
Assistant Professor
Virginia State University
G. Philip Robertson
Michigan State University
Make your next move.
Prepare your application
Review drafts before you send them.