Daniel Dobras
Assistant Professor
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
About
Daniel Dobras is an Assistant Professor at Wrocław University of Science and Technology in Poland. His research focuses on the mechanical properties and behavior of various aluminum alloys under pulsed electric currents and strain rates. He has published several articles examining the microstructure, wear resistance, and plastic behavior of aluminum alloys in different hardening states.
Articles (10)
Year:
2026
This study presents the first application of Machine Learning (ML) models to optimise Powder Bed Fusion using Laser Beam (PBF-LB) process parameters for H13 steel fabricated on a 350 °C preheated building platform. A total of 189 cylindrical specimens were produced for training and testing machine learning (ML) models using variable process parameters: laser power (250–350 W), scanning speed (1050–1300 mm/s), and hatch spacing (65–90 μm). Eight ML models were investigated: 1. Support Vector Regression (SVR), 2. Kernel Ridge Regression (KRR), 3. Stochastic Gradient Descent Regressor, 4. Random Forest Regressor (RFR), 5. Extreme Gradient Boosting (XGBoost), 6. Extreme Gradient Boosting with limited depth (XGBoost LD), 7. Extra Trees Regressor (ETR) and 8. Light Gradient Boosting Machine (LightGBM). All models were trained using the Fast Library for Automated Machine Learning & Tuning (FLAML) framework to predict the relative density of the fabricated samples. Among these, the XGBoost model achieved the highest predictive accuracy, with a coefficient of determination R2=0.977, mean absolute percentage error MAPE = 0.002, and mean absolute error MAE = 0.017. Experimental validation was conducted on 27 newly fabricated samples using ML predicted process parameters. Relative densities exceeding 99.6% of the theoretical value (7.76 g/cm3) for all models except XGBoost LD and KRR. The lowest MAE = 0.004 and the smallest difference between the ML-predicted and PBF-LB validated density were obtained for samples made with LightGBM-predicted parameters. Those samples exhibited a hardness of 604 ± 13 HV0.5, which increased to approximately 630 HV0.5 after tempering at 550 °C. The LightGBM optimised parameters were further applied to fabricate a part of a forging die incorporating internal through-cooling channels, demonstrating the efficacy of machine learning-guided optimisation in achieving dense, defect-free H13 components suitable for industrial applications.
Year:
2026
Year:
2025
Additive manufacturing (AM) of hot-work tool steels such as H13 offers unique opportunities for producing complex, conformally cooled tools with reduced production time and material waste. In this study, five metal AM technologies—Fused Deposition Modeling and Sintering (FDMS, Desktop Metal Studio System and Zetamix), Binder Jetting (BJ), Laser Powder Bed Fusion (LPBF), and Directed Energy Deposition (DED)—were compared in terms of microstructure, porosity, and post-processing heat treatment response. The as-printed microstructures revealed distinct differences among the technologies: FDMS and BJ exhibited high porosity (6–9%), whereas LPBF and DED achieved near-full densification (<0.1%). Samples with sufficiently low porosity (BJ, LPBF, DED) were subjected to tempering and quenching treatments to evaluate hardness evolution and microstructural transformations. The satisfactory post-treatment hardness was observed in both tempered and quenched and tempered BJ samples, associated with secondary carbide precipitation, while LPBF and DED samples retained stable martensitic structures with hardness around 600 HV0.5. Microstructural analyses confirmed the dependence of phase morphology and carbide distribution on the thermal history intrinsic to each AM process. The study demonstrates that while FDMS and BJ are more accessible and cost-effective for low-density prototypes, LPBF and DED offer superior density and mechanical integrity suitable for functional tooling applications.
Year:
2025
The low formability of aluminum alloys at room temperature is their main disadvantage. Many studies have shown that the application of current pulses to metal alloys during their forming results in an increase in their formability. However, these studies are mainly limited to uniaxial tensile or compression tests. The effect of current pulses on the properties of metal alloys in cyclic torsion tests has not yet been determined. These studies have shown that the application of current pulses during the cyclic torsion process of 5083 aluminum alloy results in an improvement of its plasticity. The main factor responsible for the observed changes is recovery. The application of current pulses is justified in forming processes with different strain states.
Year:
2025
Year:
2024
Year:
2023
Year:
2021
Year:
2020
Year:
2020
Collaborators (5)
Bartlomiej Wysocki
Assistant Professor
Cardinal Stefan Wyszyński University in Warsaw
Dominik Terefinko
Wroclaw University of Science and Technology
Marek Muzyk
Cardinal Stefan Wyszyński University in Warsaw
Katsiaryna Kosarava
assistant professor
Cardinal Stefan Wyszyński University in Warsaw
Zbigniew Zimniak
University of Wrocław
Make your next move.
Prepare your application
Review drafts before you send them.