Danielle L. Cote

Gas-atomization is extensively used to produce metallic feedstock powders for additive manufacturing processes, including gas dynamic cold spray processing. This work explores the potential utility of on-demand recycled titanium scrap feedstock powder as a viable substitute for virgin powder sources. Three recycled titanium powders were atomized from different battlefield scrap sources using a mobile foundry developed by MolyWorks Materials Corporation. Recycled titanium alloy powders were compared against virgin Ti-6Al-4V powder to verify there were no significant variations between the recycled and virgin materials. Powder characterization methods included chemical analysis, particle size distribution analysis, scanning electron microscopy (SEM), Karl Fischer (KF) titration moisture content analysis, X-ray diffraction (XRD) phase analysis, microparticle compression testing (MCT), and nanoindentation. Results indicate that recycled titanium powder provides a viable alternative to virgin titanium alloy powders without compromising mechanical capabilities, microstructural features, or ASTM-specified composition and impurity standards. The results of this work will be used to aid future research efforts that will focus on optimizing cold spray parameters to maximize coating density, mechanical strength, and hardness of recycled titanium feedstock powders. “Cold spray” presents opportunities to enhance the sustainability of titanium component production through the utilization of recycled feedstock powder, mitigating issues of long lead times and high waste associated with the use of conventional virgin feedstock.