Dmytro Saveliev
Доцент кафедри
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (10)
Year:
2026
Year:
2026
Year:
2026
The object of research is the process of fat glycerolysis in order to obtain fatty acid monoglycerides. Monoglycerides are an important component of chemical, pharmaceutical, cosmetic, and food industry products. These substances are used as emulsifiers, structure formers, complex formers, etc. The industrial production of monoglycerides involves the use of complex technologies, as well as dangerous and unstable catalysts. An urgent task is to develop new catalysts and improve technologies for monoglycerides obtaining. The technology for the synthesis of monoglycerides by the glycerolysis method, which involves the reaction of vegetable hydrogenated fat with glycerol, was studied. Potassium glyceroxide was used as a catalyst, which is effective and safe in terms of production and use. Hydrogenated unrefined fat according to DSTU 5040 (CAS Number 68334-28-1) was used. The fat has non-standard parameters: the melting point is 51 °C, the mass fraction of moisture and volatile substances is 0.3 %, the acid value is 3.2 mg KOH/g, the peroxide value is 7.6 ½ O mmol/kg. The process duration was 90 minutes, the glycerol concentration was 50 %. Rational conditions for glycerolysis were determined: catalyst concentration (1.5 %) and temperature (140 °C). Under these conditions, the product ensured the stability of the “water – sunflower oil” emulsion of 96.8 %, the concentration of monoglycerides in the system was 0.1 %. Product parameters: mass fraction of monoglycerides – 72.5 %, free glycerol – 1.5 %, acid value – 1.7 mg KOH/g. The research results make it possible to improve the glycerolysis process using a new catalyst and obtain monoglycerides with high emulsifying ability. This will increase the profitability of the enterprise and increase the volume of production of high-quality monoglycerides for various industries
Year:
2023
Виявлено особливості методів моделювання швидкості тепловиділення у Fire Dynamic Simulator. Порівняно зміну швидкості тепловиділення у часі в залежності від методу моде-лювання та практично реалізовано методи на прикладі типового приміщення для виявлення впливу швидкості тепловиділення на розвиток небезпечних чинників пожежі. Під час засто-сування Fire Dynamic Simulator для дослідження небезпечних чинників у повному обсязі не зрозуміло, яке значення швидкості тепловиділення слід використовувати при вивченні ди-наміки розвитку пожежі, що впливає на оцінювання отриманих результатів. Виявлення осо-бливостей кожного з методів надасть змогу ефективно застосовувати їх з метою забезпе-чення рівня пожежної безпеки. В результаті порівняння зміни швидкості тепловиділення у часі в залежності від методу моделювання розроблено класифікацію методів моделювання. Під час практичної реалізації методів на прикладі типового приміщення встановлено, що при застосуванні першого метода моделювання у порівнянні з другим, підвищення темпе-ратури нарізних інтервалах часу зростає швидше у 1,5–3 рази відповідно. Під час аналізу втрати видимості, встановлено, що при використанні сталої швидкості тепловиділення зни-ження видимості на різних інтервалах часу досягається швидше, ніж при швидкість тепло-виділення, яка змінюється у часі, відповідно у 1,6–3 рази. Під час аналізу зниження концен-трації кисню встановлено, що при застосуванні першого методу моделювання, значення концентрації кисню у повітрі знижується у 1,2–1,6 разів швидше на різних інтервалах часу у порівнянні з показниками другого методу. Завдяки виявленим особливостям кожного з методів моделювання розроблені рекомендації щодо їх використання у Fire Dynamic Simulator. Це надає змогу ефективно застосовувати методи та проводити оцінку результатів з прийняттям подальших рішень для забезпечення належного рівня пожежної безпеки.
Year:
2023
The object of research is the process of fat oxidation at elevated and standard temperatures. Fats are used in chemical, pharmaceutical, food and other industries. Oxidative deterioration changes the composition of fats, reduces the efficiency of chemical reactions involving fats and the quality of final products. An urgent task is to increase the oxidative stability of fats. The oxidative stability of fat compositions based on rapeseed, high-oleic sunflower and palm oils by the induction period at a temperature of 110 °C was investigated. The induction periods of the initial oils were 408.48 min., 795.87 min. and 630.2 min., respectively. Rational ratios of oils in the compositions were found: high-oleic sunflower: palm (50:50) %; rapeseed: high-oleic sunflower: palm (16.67:66.67:16.67) %; rapeseed: high-oleic sunflower: palm (33.33:33.33:33.33) %. The induction periods of the mixtures are 650.57 min., 710.56 min. and 670.56 min., respectively. The increase in the oxidative stability of the developed compositions using the mixture of synthetic antioxidants (butylhydroxyanisole, butylhydroxytoluene and tert-butylhydroquinone) in an amount of 300 mg/kg of fat mixture was studied. The induction periods of the developed compositions were 910.80 min., 1279.01 min. and 1072.90 min., respectively. The physicochemical parameters of compositions with the addition of antioxidants after 5 months of storage at a temperature of (20±2) °C were determined. The peroxide values of the compositions were 5.65; 3.28; 4.50 ½ O mmol/kg, respectively. The research results make it possible to produce fats with increased oxidative stability and necessary properties, to predict induction periods of fat compositions depending on the concentrations of components. This will increase the profitability of production and the quality of fats obtained
Year:
2023
The process of sodium glyceroxide obtaining by the reaction of glycerol and sodium hydroxide in the form of an aqueous solution was investigated. Glycerol salts (metal glyceroxides) are important components in the synthesis of many compounds. Glyceroxides are used in the chemical industry, construction, medical practice, etc. Glyceroxides of alkali metals are used in the production of modified fats and biodiesel fuel. P.a.-grade glycerol (CAS Number 56-81-5) was used with a mass fraction of the main substance of 99.5 %. The parameters of sodium hydroxide (CAS Number 1310-73-2) were studied: the mass fraction of the main substance is 98.0 %, the mass fraction of sodium carbonate is 0.5%. Rational conditions for sodium glyceroxide obtaining were determined: temperature (145 °C) and concentration of sodium hydroxide solution (65 %). Under these conditions, the mass fraction of the main substance in the product was 80 %. The melting point (72 °C) and mass fraction of moisture (0.3 %) in sodium glyceroxide were determined. The catalytic activity of the product in the process of transesterification of palm olein was tested. The increase in the melting point of palm olein was 15 °C. Under similar conditions of using potassium glyceroxide with a mass fraction of the main substance of 75.77 %, the increase in the melting point is 12.1 °C. This indicates an increase in the efficiency of the transesterification process using sodium glyceroxide obtained by the developed technology. The research results make it possible to produce sodium glyceroxide under rational conditions with a high mass fraction of the main substance at enterprises that use metal glyceroxides as a production component or commercial product. The determined rational conditions will make it possible to effectively use the company's resources and predict the quality of the final product
Year:
2022
Year:
2022
Year:
2022
Year:
2021
Collaborators (5)
Andrii Melnychenko
Associate Professor, Department of Organization and Conduct of Emergency Rescue Operations
-
Volodymyr Bahlai
-
Oleksandr Polivanov
docent
-
Olena Petukhova
доцент
-
Nataliia Borozenets
-
Make your next move.
Prepare your application
Review drafts before you send them.