Edward Sabolsky
Has grant
Professor
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
About
Edward Sabolsky is a Professor at West Virginia University in the United States. His research interests include advanced materials for soft robotics, wireless sensor technologies, and electroactive polymers, with a focus on applications in health monitoring and environmental sensing. Recent publications cover topics such as 3D printing of UV-curable elastomers and the characterization of wireless patch antennas using machine learning. He also investigates the effects of environmental conditions on the performance of electroactive materials.
Recent Grants
Grant: Close
STTR Phase I: Rapid Investment Casting of Superalloys Using Microwave Technology
Open Date: 2015-07-01
Close Date: 2016-06-30
Grant: Close
Smart Refractory Sensor Systems for Wireless Monitoring of Temperature, Health and Degradation of Slagging Gasifiers
Open Date: 2013-10-01
Close Date: 2018-03-31
Grant: Close
Intermediate Temperature Solid Oxide Fuel Cell Cathode Enhancement through Infiltration Fabrication Techniques
Open Date: 2006-10-01
Close Date: 2007-09-30
Grant: Close
Sulfur-Tolerant Solid Oxide Fuel Cell (SOFC) Anodes
Open Date: 2006-10-01
Close Date: 2007-09-30
Grant: Close
Low Cost Materials, Designs, and Manufacturing Processes for Robust Tubular Solid Oxide Fuel Cells (SOFC)
Open Date: 2004-10-01
Close Date: 2005-09-30
Articles (11)
Year:
2026
Temperature monitoring in extreme environments, such as coal-fired power plants, was addressed by designing and testing wireless patch antennas for use in machine learning-aided temperature estimation. The sensors were designed to monitor the temperature and health of boiler systems. Wireless interrogation of the sensor was performed using a Vector Network Analyzer (VNA) and a pair of interrogation antennas to capture resonance behavior under varying thermal and spatial conditions with sensitivities ranging from 0.052 to 0.20 MHz°C. Sensor calibration was conducted using a Long Short-Term Memory (LSTM) model, which leveraged temporal patterns to account for hysteresis effects. The calibration method demonstrated improved performance when combined with an LSTM model, achieving up to a 76% improvement in temperature estimation error when compared with Linear Regression (LR). The experiments highlighted an innovative solution for patch antenna-based non-contact temperature measurement, which addresses limitations with conventional methods such as RFID-based systems, infrared, and thermocouples.
Year:
2025
The study focused on the direct ink writing (DIW) three-dimensional printing and characterization of UV-curable elastomers embedded with strain sensors for soft robotic applications. DIW was chosen due to its ability to precisely deposit multiple composite compositions in order to fabricate complex structures with varied spatial functionality. By leveraging a thiol–ene click chemistry, a range of elastomer compositions were developed using poly(mercaptopropylmethylsiloxane-co-dimethylsiloxane) and vinyl-terminated polydimethylsiloxane with varying molecular weights and photoinitiator concentrations. Rheological analysis demonstrated that photoinitiator concentration directly influenced viscosity, with a controlled range of 10–150 cP being optimal for DIW-based patterning. Upon UV exposure using a 5 W and 365 nm UV source, the elastomers exhibited rapid curing, with viscosity increasing significantly within ∼1 s, demonstrating high polymerization efficiency. A processing map was constructed, revealing the optimized printing speeds and UV source positioning to reduce excessive print spreading, thereby enhancing structural fidelity. Mechanical testing of printed dog-bone specimens printed with the optimal parameters showed a time-dependent increase in elastic modulus and tensile strength over seven days due to prolonged crosslinking. Additionally, silver-filled conductive polymer composites were embedded within the elastomer matrix to create strain sensors, exhibiting linearity (linear sensor output resistance to strain level) and demonstrating a stable cyclic response under 5% strain for 100 cycles. These results suggest that thiol–ene UV-curable silicone elastomers are promising materials for applications in the development of soft structures, particularly in the development of complex smart and multi-functional materials required for soft robotics and flexible electronics.
Year:
2025
Year:
2025
Year:
2025
This work focuses on the fabrication and evaluation of a passive wireless sensor for the monitoring of the temperature and corrosion of a metal material at high temperatures. An inductor–capacitor (LC) resonator sensor was fabricated through the screen printing of Ag-based inks on dense polycrystalline Al2O3 substrates. The LC design was modeled using the ANSYS HFSS modeling package, with the LC passive wireless sensors operating at frequencies from 70 to 100 MHz. The wireless response of the LC was interrogated and received by a radio frequency signal generator and spectrum analyzer at temperatures from 50 to 800 °C in real time. The corrosion kinetics of the Cu 110 was characterized through thermogravimetric (TGA) analysis and microscopy images, and the oxide thickness growth was then correlated to the wireless sensor signal under isothermal conditions at 800 °C. The results showed that the wireless signal was consistent with the corrosion kinetics and temperature, indicating that these two characteristics can be further deconvoluted in the future. In addition, the sensor also showed a magnitude- and frequency-dependent response to crack/spallation events in the oxide corrosion layer, permitting the in situ wireless identification of these catastrophic events on the metal surface at high temperatures.
Year:
2024
Year:
2023
Year:
2023
Year:
2022
Year:
2021
Year:
2021
Collaborators (3)
Xingbo Liu
West Virginia University
Wenyuan Li
West Virginia University
Jay Wilhelm
Associate Professor
Ohio University
Make your next move.
Prepare your application
Review drafts before you send them.