Fiachra O’Loughlin

Assistant Professor

Dublin City University
Country flagIreland

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (14)

Supporting stakeholders with science-based decision-making to mitigate and adapt to climate change impacts is a central mandate of the climate research community. In particular, mapping out scenario-dependent climate risk landscapes is one of the most pressing challenges. Increasingly, communities and regions are experiencing high-impact climate and weather extremes that arise from a complex interplay of processes and events acting across various spatial and temporal scales. To account for these emerging trends, there is a growing recognition that both climate impact and early warning research needs to incorporate risks from compound events to better inform climate adaptation and mitigation efforts. This demand for more fine-grained and applicable knowledge gives rise to new data and modeling needs, and can increase uncertainties. Consequently, new methodological approaches and effective communication strategies are required for making research usable outside scientific communities. In this perspective, we reflect on this usability challenge by discussing impact data products, early warning and modeling capabilities, and communication tools, urging climate impact scientists to increasingly incorporate usability considerations in their research to meet the pressing demand for usable compound event research.

Year:

2025

Urbanisation has a significant impact on the hydrological cycle, primarily through the replacement of natural, permeable surfaces with impermeable, constructed materials. This rapid increase in imperviousness, coupled with ongoing changes in precipitation patterns, has led to both an increased frequency and severity of urban flooding, especially in densely populated areas with limited green spaces. Residential gardens account for a significant proportion of a city’s total urban green spaces. These gardens can offer a promising opportunity for integrating nature-based solutions (NBS) to mitigate urban flooding by enhancing infiltration and reducing surface runoff. Therefore, this study evaluates the role of domestic gardens as NBS for flood mitigation within the highly urbanised Drimnagh neighbourhood in Dublin, Ireland. In particular, we consider diverse vegetation types, permeable and impermeable yard surfaces, and roof structures to assess their effects on flood dynamics during an extreme rainfall event on June 20, 2023. The neighbourhood covers an area of 69 hectares with 260 residential buildings. Using a hydrodynamic model, we simulate inundation depths, streamflow, runoff, and infiltration under four different scenarios for the same neighbourhood during this storm. Our results show that the best-case scenario, with improved garden vegetation and green roofs, could facilitate up to 1650 m³ of water infiltration water compared to the worst-case scenario, where all surfaces are paved. This scenarios with improved permeable surfaces can also reduce flood extents (up to 30%), mean inundation depths (8.3%), and flood peaks (5.6%) in the neighbourhood. This analysis highlights the potential of NBS implementation in domestic gardens in building urban flood resilience.

Year:

2025

Accurate rainfall measurement, particularly at high spatiotemporal resolution, is crucial for urban flood monitoring. However, traditional methods of obtaining rainfall data are often inaccessible, costly, or inadequate for capturing localised flooding events. Low-cost weather stations (LCWS) can provide a viable solution, promoting public awareness and engagement with climate-related issues, including flooding, amidst growing urbanisation. This study shows the important role individual citizens can play in monitoring rainfall and contributing to flood mitigation measures. A total of 40 LCWS were deployed across Dublin to monitor rainfall at 5-minute intervals. The recorded rainfall data were compared with measurements from three nearby reference stations (RefS) operated by Met Éireann, as well as satellite rainfall data from the Global Satellite Mapping of Precipitation (GSMaP), focusing on extreme events and hourly scales. Various performance indicators, were used to evaluate the accuracy of LCWS relative to the RefS. Overall, LCWS demonstrated closer alignment with the RefS, achieving higher CC (0.43 vs 0.26) and Probability of Detection (POD) (0.49 vs 0.23) values, along with lower Percent Bias (14.7 vs -48.3%) and False Alarm Ratio (FAR) (0.27 vs 0.38) values, compared to the GSMaP data. Moreover, POD values (FAR values) showed a decreasing (increasing) trend with distance from the RefS, representing the spatial variability of rainfall. Additionally, citizens’ engagement was assessed through a survey with preliminary results revealing that nearly 60% of homeowners observed intense rainfall events being recorded by their stations during the study period. 78.6% of respondents reported an increased interest in climate change and urban flooding, while 57% expressed a growing interest in advocating for climate action and urban sustainability due to their participation in this project. These findings underscore the potential of LCWS in participatory monitoring and their ability to drive advocacy for climate action and urban flood mitigation.

Year:

2025

Corner reflectors (CRs) are artificial installations at specific locations that reflect radar or other electromagnetic waves toward their emission source. There are two types of corner reflector: passive CRs lack electronics, while active CRs have electronics to amplify the reflected signals. CRs have a high and stable radar cross section, a well-defined scattering centre, and are easily detectable in the image, making them suitable for SAR radiometric, geometric, and polarimetric calibration. CRs are also used for SAR interferometry (InSAR) applications over areas with few natural coherent scatterers, and for InSAR datum connection and geodetic integration. Passive CRs are often made of metal plates, such as aluminium. Drawbacks of using metal CRs include (i) their high cost, especially when many reflectors are required for monitoring purposes; (ii) creation of localized ground motion in soft or unstable soils and (iii) attractiveness for thieves. The main objective of this study is to investigate the use of low-cost and lightweight materials for making CRs. A cubic trihedral CR, made of 2mm thick aluminium plates, served as a baseline for our analysis. It was compared to CRs built either from (a) 10mm thick multiwall polycarbonate sheets covered by 1mm thick aluminium foil tape, or from (b) multiwall polycarbonate sheets coated with metallic paint. In addition, the microstructure of these materials was analysed by using scanning electron microscope (SEM) technique in a laboratory. To assess the SAR reflectivity of the different CRs they were temporarily installed at a test site and their visibility and backscattering properties were assessed in Sentinel-1 images. Furthermore, two CRs were installed in a landslide to investigate their performance in a real InSAR application. The study revealed that low-cost materials can deliver performance levels comparable to metal materials, in terms of visibility and backscattering properties, while reducing the weight and cost.

Year:

2025

Phosphate (PO₄) is often the limiting nutrient driving eutrophication and algal blooms in freshwater ecosystems. Accurate estimation of PO₄ concentrations is crucial for assessing the impacts of agriculture and urban emissions on water bodies and evaluating the effectiveness of catchment mitigation measures. However, measuring PO₄, especially at low concentrations, is technically complex, and modelling its dynamics is challenging due to the interplay between emissions, absorption, and transport processes in the natural environment. This study develops a Random Forest model to predict PO₄ concentrations in Irish water bodies, using catchment descriptors related to climate, land use, geology, topography, and anthropogenic activities. The model achieves an R² of 0.35 and an RMSE of 0.03 mg/L on an independent validation dataset, demonstrating moderate predictive accuracy. The developed model is applied to current and future climate and land use change scenarios to evaluate the influence of catchment-level mitigation measures. The findings highlights the significant roles of soil texture and permeability in influencing downstream PO₄ concentrations. Moreover, descriptors which are associated with low-intensity land use, such as peatlands and forests, were identified as having a positive effect in reducing PO₄ concentrations in water bodies. This underscoring the importance of sustainable land management practices in maintaining healthier ecosystems.

Year:

2025

Conventionally, models used for flood inundation forecasting are typically physically based and computationally intense. This limits their suitability for operational flood inundation forecasting where high-resolution data are critical. Deep Learning (DL) models have been proven to be able to reduce the computational burden while maintaining acceptable accuracies. However, some DL surrogate models often require complex model architectures that result in high computational costs to capture flood dynamics across the entire domain.With the recent development of advanced DL models, generative models have the potential to overcome the need for computationally expensive model architecture and to be useful in flood inundation forecasting. Generative models can: generate synthetic data, capture complex relationships between different variables (e.g., hydrological, meteorological and topographical estimates) and allow for domain transferability. In this study, we developed a deep generative model as a surrogate model for flood inundation forecasting and investigated its performance under various spatial and temporal resolutions. The initial results indicate that increasing spatial resolution has a bigger impact on model training time compared to increasing temporal resolution; however, does not impact model prediction time. Additionally, the model accuracy tends to increase with the increase in resolution at the expense of computational costs. Enlarging the computation sub-domain can shorten the overall model run time and improve model accuracy but it's subject to hardware capacity. These findings indicate that the proposed generative surrogate model has the potential for operational flood forecasting.

Year:

2025

Reliable precipitation data from in-situ stations is often limited by inconsistent quality, resolution, and spatial coverage. This is particularly true in regions like the West Bank, where ground-based observations are scarce. This hampers hydrological and environmental studies where accurate precipitation estimates are vital. Therefore, satellite-based rainfall products are an appealing alternative due to their broad spatial and consistent temporal coverage. However, the accuracy of these products in complex terrain is questionable due to sensor and retrieval errors, necessitating adjustment to improve their reliability. This study evaluates various adjustment methods for four satellite precipitation products (IMERG Final Run, PDIR-Now, CCS-CDR, and CMORPH) across the study area of Historical Palestine (West Bank and Israel). Daily satellite precipitation estimates were compared to observations from 316 in-situ stations (256 in Israel and 58 in the Palestinian territories). Adjustment methods included traditional bias correction techniques (Linear Scaling, Daily Translation, and Annual Sums), more advanced approaches (Empirical Quantile Mapping, Robust Quantile Mapping, Gaussian Distribution Mapping, and Local Intensity Scaling), and machine learning models (Random Forest and Artificial Neural Networks). Results show that, among the non-machine learning approaches, Daily Translation (DT) achieved the greatest improvement in accuracy followed by Power Bias adjustment. DT applied to IMERG resulted in an improvement of 24% and 17% in R2 and Mean Absolute Error (MAE) respectively. All machine learning approaches outperformed non-machine learning methods, with a two-step Random Forest (RF2) method delivering the best results. RF2, which leverages data from multiple satellites, had a 109% improvement in R2 and a 54% improvement in MAE. Additionally, the global RFG model showcased excellent results in producing a unified model that can be generalized for the entirety of the study area. The findings are globally applicable and evaluate multiple adjustment methods which opens the opportunity for easily accessible remotely sensed precipitation products to be used in many hydrological applications.

Year:

2025

Hydrological modelling of peatlands requires capturing the complex interactions between overland and subsurface processes along with any anthropogenic impacts, such as artificial drainage for peat extraction and agriculture. To date there has been limited intercomparison studies evaluating the hydrological performance of multiple rainfall-runoff models. Here, we present the results of two different modelling comparison studies for three raised peatlands located in Ireland. These peatlands have all being heavily impacted by artificial drainage for peat extraction; however, peat extraction activities have halted, and one has been rewetted. The first study compares 47 conceptual rainfall-runoff models included in the MARRMoT toolbox at all three sites, while the second study uses a more process-based framework, SUMMA, to represent the different processes at a drained site with various model configurations.Results from the first study show that there is a significant drop in the ability to simulate the rewetted peatland compared to the drained peatland sites. This study also indicate that the while no single model can outperform others, multi-model ensemble approaches offer better performances. The results from the SUMMA framework highlight the importance of representing the artificial drainage component in simulating the hydrology of drained peatlands. Performance increased significantly once we coded this component into the SUMMA framework.

Year:

2025

The availability of precipitation data from in-situ stations faces various challenges including varying quality and resolutions, improper distribution, and scarcity in many regions. This is particularly true for the West Bank. Hence, identifying the best available alternatives is a priority since high quality precipitation estimates are essential for most hydrological applications. This study focuses on examining the suitability of four satellite precipitation products (IMERG Final Run, PDIR-Now, CCS-CDR, CMORPH) in the Levant region taking Historical Palestine (West Bank, Israel) a case study. These precipitation products were compared to 502 in-situ rainfall stations (132 Palestinian and 370 Israeli) across the region at a daily time-step and had fine spatial resolutions varying 4-10 Km. Results show that IMERG estimates outperform all other products, with a mean R2 = 0.33 and Probability of Detection (POD) =0.7 with no adjustments applied. This R2 value is significantly higher than those found in other studies with similar climates. CMORPH was found to be the next best with a mean R2 =0.2 and POD = 0.4. The impact of elevations was also investigated and while IMERG was again the best overall, CCS-CDR performed better at lower elevations. Additionally, the satellite products were used to compare nearby Israeli and Palestinian stations and all satellites achieved higher results when compared to the Israeli stations. This potentially indicates the need for further investigation into the quality of Palestinian stations. Overall, this study found that IMERG provided the best performing satellite-based precipitation estimate for the Levant Region across a range of elevations, climatic regions, and rainfall thresholds. In addition to identifying the best performing date sets and examining newly released satellite products, this study’s finding will open the way to the application of these data sets for many hydrological purposes using available, easy-access remotely-sensed products.

Year:

2025

Peatlands are a large store of carbon and nutrients. In Ireland, these cover 21% of the country’s area and have been extensively drained mainly for peat extraction (both industrial and domestic). This has intensified decomposition and water flow from peat-dominated catchments. Consequently, there has been an increase in the discharge of harmful contaminants downstream that may violate the EU Water Framework Directive requirements for good ecological status of surface waters, and ultimately disturb aquatic ecosystems. Climate variations also affect the water quality by mediating the release of nutrients and modifying flows. Mitigation measures that overcome the resulting regulatory, ecological and climate challenges are warranted. For industrial peat extraction in Ireland, ponds have been excavated at the edge-of-field to provide treatment of outflows. However, little is known about the dynamics of the contaminants, and the efficiency of currently implemented measures.We hypothesize that the quality of water from degraded peatland catchments is highly dynamic and is harmful to surface waters all year round. Prolonging the hydraulic retention time on site with ponds is not sufficient for good treatment due to high proportion of soluble nutrients and unfavorable biogeochemical conditions. We show this with an experiment at the edge of an Irish degraded raised bog subjected to peat extraction where a drainage network allowed water to flow through ponds at the edge-of-field. A monitoring station was installed at the outlet with an automatic sampler which captured water samples during 14 storm events. Moreover, a one-year grab sampling campaign was conducted at the pond inlet and outlet. The samples were analysed for pH, electrical conductivity, and nutrient and ion concentrations. The station also directly measured water quality parameters and flow, for one and a half years. Both meters were then moved to the pond inlet for another year while a flow was monitored at the pond outlet. The amount of sediment deposited in the pond was estimated by counting the number of filled excavator buckets to clean it and then accounting for sediment moisture.Nutrients in effluents were mostly in soluble forms and varied greatly between storm events. These were particularly high at low flows suggesting a dilution effect. Large nutrient exports occurred only momentarily during extreme high flows. All water quality parameters varied widely throughout the seasons showing significant differences (p < 0.05). pH, nitrate and total ammonia often exceeded environmental water quality standards. Flow and temperature significantly explained the variability of nearly all water quality parameters, and temperature had a greater effect. These had inverse (generally monotonic) and direct (generally linear) relationships, respectively, with water quality parameters, except that flow was directly and linearly related to turbidity. Therefore, warm periods appear to produce nutrient and ion-rich effluents, whereas cold and rainy periods appear to produce acidic and turbid effluents. The dissolved water quality at the pond outlet was similar to the inlet indicating minimal treatment by the pond. However, it retained around 23 L of sediment per day. The results corroborate our hypotheses highlighting the need for more appropriate mitigation measures.

Year:

2025

Year:

2025

Year:

2025

Year:

2024

Year:

2023

Collaborators (25)

Salman Khan

Postdoc/Lecturer

University College Dublin

IRELAND
View details

Cristina Deidda

Vrije Universiteit Brussel

BELGIUM
View details

D. Maraun

University of Graz

AUSTRIA
View details

Mohammed Sarfaraz Gani Adnan

University Of Strathclyde

UNITED KINGDOM
View details

Andreia F. S. Ribeiro

Helmholtz-Zentrum für Umweltforschung UFZ

GERMANY
View details

Jakob Zscheischler

Head

Technische Universität Dresden

GERMANY
View details

Emanuele Bevacqua

Emmy Noether Group Leader

Helmholtz-Zentrum für Umweltforschung UFZ

GERMANY
View details

Laura Suarez-Gutierrez

Assistant Professor for Atmospheric Dynamics

Wageningen University & Research

NETHERLANDS
View details

Carlo De Michele

Professor of Hydrology and Water Engineering

Politecnico di Milano

ITALY
View details

Marleen Ruiter, de

Assistant professor

University of Amsterdam

NETHERLANDS
View details

Wiebke Jäger

Assistant Professor

University of Amsterdam

NETHERLANDS
View details

Andreas H. Fink

Professor

Karlsruher Institut für Technologie

GERMANY
View details

Silvia De Angeli

Université de Lorraine

FRANCE
View details

Miguel Mahecha

Professor

Leipzig University

GERMANY
View details

Bart van den Hurk

University of Amsterdam

NETHERLANDS
View details

Joaquim G. Pinto

Professor

Karlsruhe Institute of Technology

GERMANY
View details

Colin Raymond

Assistant Research Scientist

University of California, Los Angeles

UNITED STATES
View details

Enrico Tubaldi

Reader

University Of Strathclyde

UNITED KINGDOM
View details

Benjamin Poschlod

Senior Researcher

Hamburg University of Technology

GERMANY
View details

Shruti Nath

University of Oxford

UNITED KINGDOM
View details

Patrick Ludwig

Group Leader

Karlsruhe Institute of Technology

GERMANY
View details

Olivia Martius

University of Bern

SWITZERLAND
View details

John Douglas

University Of Strathclyde

UNITED KINGDOM
View details

Eoghan Holohan

College Lecturer in Structural Geology

University College Dublin

IRELAND
View details

Gabriele Messori

Professor

Uppsala University

SWEDEN
View details