Geert Lombaert
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (21)
Year:
2026
Year:
2026
Year:
2026
Year:
2026
Year:
2026
Year:
2026
Year:
2025
An accurate assessment of corrosion in reinforced concrete structures is crucial for predicting their remaining capacity. Hence, this research develops a Bayesian updating approach, utilizing spatially distributed inspection data, to enhance corrosion parameter predictions. The study focuses on two corrosion parameters, which represent both steel and concrete degradation: the corrosion level (CL) and reduced apparent concrete stiffness. Initial prior estimations of both corrosion parameters are based on corrosion initiation time and current density, as often employed in the literature and in practice. Thereafter, inspection data, including detailed crack measurements and acoustic emission sensing, are used to enhance the reliability of the parameter estimations, as quantified through Bayesian updating. The prior and posterior estimated corrosion parameters are incorporated in finite element model predictions of the structural capacity, which are compared with experimental test results to validate the updating approach and quantify the improved model accuracy. The results show that integrating inspection data improves corrosion parameter and structural capacity predictions, especially for structural elements with non‐uniform CLs. Moreover, the Bayesian framework allows for incorporation of uncertainties, ensuring robust corrosion assessments.
Year:
2025
In this study, the effects of natural fire exposure on the post‐fire behavior of concrete beams are investigated. The study is based on laboratory tests where three reinforced concrete beams were subjected to fire exposure using an electric radiant panel. This panel enables a precise application of radiative heat exposure closely mimicking natural fire exposure in a safe manner. During the test, the deflections, deformations and temperature changes are measured for all three concrete beams. Additionally, finite element modeling (FEM) is applied to supplement these tests, demonstrating the performance of existing structural fire engineering calculation tools in evaluating the burnout performance of concrete beams. The results of the tests show that the electric radiant panel provide a novel approach for fire simulation which is effective in replicating natural fire conditions, by applying the heat flux as specified in the Eurocode Parametric Fire Curve in a highly controlled manner. The uniformity of the temperature field measured inside the beams and the consistent deformations observed during the heat exposure across all three tests underscores the accuracy of the fire simulation. Furthermore, post‐fire assessments reveal that while the exposed beams suffered some reduction in load‐bearing capacity, they retained a significant portion of their original strength that was consistent across all three beams. The numerical simulations conducted in this study demonstrate a high level of accuracy in predicting the behavior of the concrete beams during fire exposure. These simulations effectively mirrored the experimental results, validating that they are a valuable tool for assessing concrete structures' performance in fire scenarios.
Year:
2025
Year:
2025
Year:
2025
Year:
2025
Year:
2025
Year:
2025
Year:
2025
Year:
2025
Year:
2025
Year:
2024
Year:
2024
Year:
2024
Year:
2024
Collaborators (13)
Michael Reiterer
Adjunct Professor
Vienna University of Technology
Stijn François
Professor at KU Leuven
KU Leuven
Alois Vorwagner
AIT Austrian Institute of Technology GmbH
Robby Caspeele
Associate Professor
Ghent University
Carlo Rainieri
Reasearcher
Consiglio Nazionale delle Ricerche
Abbas Zangeneh Kamali
KTH Royal Institute of Technology
Eline Vereecken
Assistant professor
Hasselt University
Hans De Backer
Associate Professor
Ghent University
Juan José Aznárez
2001 to present | Investigador
Universidad de Las Palmas de Gran Canaria
Constantijn Martens
Coordinating Researcher
KU Leuven
MARIA PIA REPETTO
Università degli Studi di Torino
Guillermo Álamo
Universidad de Las Palmas de Gran Canaria
Stijn Matthys
Universiteit Gent
Make your next move.
Prepare your application
Review drafts before you send them.