Goran Mihulja

Country flagCroatia

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (5)

Steaming beech wood is one of the most commonly used eco-based processes for wood color equilibration. In addition to color equalization, steaming has also been noticed to stabilize the final product (solid wood panels). The beech wood samples used in this study were steamed for two different periods. PVAc and polyurethane (PU) adhesives were used to analyze bonding strength and durability. The bonding strength was measured according to the EN 13354 standard. The samples were treated before testing according to the first part of the standard, i.e., immersion in water. The durability of the bonded joint was tested according to the ISO 9142 standard. The samples were treated before testing with two methods. The results of the bonding strength show the influence of the steaming process on the bonded joint. Short exposure to steam decreased bonding strength, and prolonged exposure increased bonding strength. From the results given and the statistical analysis, it can be concluded that a prolonged steaming period increases the stability of the beech wood and thus the durability of the bonded joints.

Year:

2023

Various surface modification techniques have been developed to improve synthetic polymer surfaces’ wetting, adhesion, and printing by adding various functional (polar) groups. UV irradiation has been proposed as a suitable procedure to achieve adequate surface modifications of such polymers, which can be of further use to bond many compounds of interest. The activation of the surface, the favourable wetting properties, and the increased micro tensile strength of the substrate after short-term UV irradiation suggest that such pretreatment can also improve the bonding of the wood-glue system. Thus, this study aims to determine the feasibility of UV irradiation for pretreatment of wood surfaces before gluing and to determine the properties of wooden glued joints prepared in this way. UV irradiation was used to modify variously machined pieces of beech wood (Fagus sylvatica L.) before gluing. Six sets of samples were prepared for each machining process. Samples prepared in this manner were exposed to irradiation on a UV line. Each radiation level had a certain number of passes through the UV line, the more passes, the stronger the irradiation. Thus, the radiation levels were as follows: 1, 5, 10, 20, and 50 passes. The dose (energy delivered on the wood surface) in one pass was 2.36 J/cm2. A wetting angle test with glue, a compressive shear strength test of lap joints, and designation of main failure patterns were used to evaluate the properties of wooden glued joints. Wetting angle test was performed according to EN 828, while the compressive shear strength test samples were prepared and tested following the ISO 6238 standard. The tests were conducted using a polyvinyl acetate adhesive. The study found that UV irradiation before gluing improved the bonding properties of variously machined wood.

Year:

2023

Year:

2022

Year:

2021

Year:

2020

Collaborators (1)

Tomislav Sedlar

Assistant professor

-

CROATIA
View details