H. Toshiyoshi
Professor
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (3)
As the Internet of Things (IoT) ecosystem continues to expand, energy harvesting (EH) has become increasingly important for realizing self-powered sensor nodes. In this paper, we propose a vibration energy harvester based on a flexible printed circuit (VEH-FPC) that effectively utilizes the substrate area in IoT devices. To achieve both a lower resonance frequency and higher output power, an auxetic mechanical metamaterial (MM) with a negative Poisson’s ratio was incorporated into the elastic layer. In addition, to suppress the delamination of electronic components induced by the large deformation of the MM structure, a hybrid design was developed in which only the mounting area for electronic components was selectively implemented as a solid-core (SC) structure. Finite element method (FEM) analysis and experimental validation demonstrated that while preserving the electrical connectivity of the sensor, which is essential for proper FPC functioning, the hybrid design achieved a 20% reduction in resonance frequency and 1.8 times higher output power compared to the conventional SC design. Furthermore, the hybrid design prevented sensor delamination even under severe bending tests, demonstrating the coexistence of mechanical stability and enhanced power-generation performance.
Year:
2026
Atomic force microscopy (AFM) uses a scanning stylus to directly measure the surface characteristics of a sample. Since AFM relies on nanoscale interaction between the probe and the sample, the resolution of AFM-based measurement is critically dependent on the geometry of the scanning probe tip. This geometry, therefore, can limit the development of related applications. However, AFM itself cannot be effectively used to characterize AFM probe geometry, leading researchers to rely on indirect estimates based on force measurement results. Previous reports have described sample jigs that enable the observation of AFM probe tips using Transmission Electron Microscopy (TEM). However, such setups are too tall to allow sample tilting within more modern high-resolution TEM systems, which can only tilt samples less than a few millimeters in thickness. This makes it impossible to observe atomic-scale crystallographic lattice fringes by aligning the imaging angle perfectly or to view a flat probe tip profile exactly from the side. We have developed an apparatus that can hold an AFM tip for TEM observation while remaining thin enough for tilting, thereby enabling atomic-scale tip characterization. Using this technique, we demonstrated consistent observation of AFM tip crystal structures using tilting in TEM and found that the radii of curvature of nominally identical probes taken from a single box varied widely from 1.4 nm for the sharpest to 50 nm for the most blunt.
Year:
2024
With the evolution of materials science and microfabrication processes, energy harvesters have become sophisticated, achieving power outputs in the range of several milliwatts, and have become a promising alternative to conventional batteries. Although their output power is insufficient to continuously operate a wireless sensor module, energy harvesters can operate small integrated circuits, including timers, watches, and ring oscillators. In this study, we emulated the human sensory nervous system to develop a battery-less sensor with a built-in analog-to-digital converter. The human sensory nervous system comprises a sophisticated sensing mechanism that digitalizes external stimuli by pulse-density modulation. To mimic this behavior, we integrated a ring oscillator with photovoltaics, allowing it to function as a luminance sensor with an event-driven operation. The oscillation frequency of the ring oscillator changes with respect to the operating voltage; hence, the output voltage of the photovoltaic modulates the frequency by more than two orders of magnitude. The sensor exhibits oscillation frequencies of 10 kHz and 7.7 MHz corresponding to luminance levels of 25–25 000 lx. Its response times are 40 μs and 15 ms when the light source is turned on and off, respectively. Battery-less sensors expand the opportunities for the application of energy harvesters in biomedical, wearable, and environmental sensing.
Year:
2023
Collaborators (3)
Takaaki Suzuki
Gunma University
Shunsuke Yamada
Assistant professor
Kyushu Institute of Technology
Gen Hashiguchi
Professor
Shizuoka University
Make your next move.
Prepare your application
Review drafts before you send them.