Holger Arthaber

In the past decade, Long-Range Wire-Area Network (LoRaWAN) has emerged as one of the most widely adopted Low Power Wide Area Network (LPWAN) standards. Significant efforts have been devoted to optimizing the operation of this network. However, research in this domain heavily relies on simulations and demands high-quality real-world traffic data. To address this need, we monitored and analyzed LoRaWAN traffic in four European cities, making the obtained data and post-processing scripts publicly available. For monitoring purposes, we developed an open-source sniffer capable of capturing all LoRaWAN communication within the EU868 band. Our analysis discovered significant issues in current LoRaWAN deployments, including violations of fundamental security principles, such as the use of default and exposed encryption keys, potential breaches of spectrum regulations including duty cycle violations, SyncWord issues, and misaligned Class-B beacons. This misalignment can render Class-B unusable, as the beacons cannot be validated. Furthermore, we enhanced Wireshark’s LoRaWAN protocol dissector to accurately decode recorded traffic. Additionally, we proposed the passive reception of Class-B beacons as an alternative timebase source for devices operating within LoRaWAN coverage under the assumption that the issue of misaligned beacons can be addressed or mitigated in the future. The identified issues and the published dataset can serve as valuable resources for researchers simulating real-world traffic and for the LoRaWAN Alliance to enhance the standard to facilitate more reliable Class-B communication.

The accuracy of radio-based positioning is heavily influenced by a dense multipath (DM) channel, leading to poor position accuracy. The DM affects both time of flight (ToF) measurements extracted from wideband (WB) signals—specifically, if the bandwidth is below 100 MHz—as well as received signal strength (RSS) measurements, due to the interference of multipath signal components onto the information-bearing line-of-sight (LoS) component. This work proposes an approach for combining these two different measurement technologies, leading to a robust position estimation in the presence of DM. We assume that a large ensemble of densely-spaced devices is to be positioned. We use RSS measurements to determine “clusters” of devices in the vicinity of each other. Joint processing of the WB measurements from all devices in a cluster efficiently suppresses the influence of the DM. We formulate an algorithmic approach for the information fusion of the two technologies and derive the corresponding Cramér-Rao lower bound (CRLB) to gain insight into the performance trade-offs at hand. We evaluate our results by simulations and validate the approach with real-world measurement data. The results show that the clustering approach can halve the root-mean-square error (RMSE) from about 2 m to below 1 m, using WB signal transmissions in the 2.4 GHz ISM band at a bandwidth of about 80 MHz.