Jawed Qureshi
Has grant
Senior Lecturer
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
About
Jawed Qureshi is a Senior Lecturer at the University of East London, UK. His research focuses on Fibre Reinforced Polymer (FRP) structures, including their application in bridges and composite beams. Recent publications include reviews on recycling methods for FRP composites and investigations into the behavior of bolted and bonded FRP beam-column joints.
Recent Grants
Grant: Close
Connections and Joints for Buildings and Bridges of Fibre Reinforced Polymer
Open Date: 2010-09-30
Close Date: 2014-03-30
Articles (15)
Year:
2026
Year:
2026
The UK construction industry faces persistent productivity deficits, with performance 21% below the national economy average. This stems from fragmented Artificial Intelligence (AI) adoption, where dynamic scheduling and proactive risk management operate as isolated systems. Through a Systematic Literature Review following PRISMA 2020 guidelines, this study analysed 60 peer-reviewed papers (2009–2025) to investigate integration barriers and develop a conceptual solution. The review synthesised AI applications in scheduling optimisation and risk management, data integration enablers, and socio-technical adoption barriers. The primary contribution is an Integrated AI Project Control Framework featuring a Risk-to-Constraint Translation Engine that automatically converts heterogeneous risk signals into machine-readable scheduling constraints, establishing continuous feedback loops for adaptive project control. The framework addresses UK-specific challenges through modular design, BIM Framework alignment, and human-in-the-loop interfaces. A key limitation is that the framework remains conceptual, requiring empirical validation through prototype development and live deployment testing.
Year:
2026
This research addresses the critical gap in accurately modelling pultruded fibre-reinforced polymer (FRP) beam-to-column joints, where previous studies largely ignored progressive damage mechanisms. A novel finite element framework is developed in ABAQUS, integrating Hashin’s failure criterion with fracture energy-based damage evolution to simulate delamination and brittle failure in FRP cleats. The model is rigorously validated against full-scale experimental data, achieving close agreement in moment–rotation response, initial stiffness (within 5%), and ultimate moment capacity (variation < 10%). Quantitative results confirm that delamination at the fillet radius governs failure, while qualitative analysis reveals the sensitivity of stiffness to cleat geometry and bolt characteristics. A parametric study demonstrates that increasing cleat thickness and bolt diameter enhances stiffness up to 15%, whereas bolt–hole clearance introduces slip without significantly affecting strength. The validated FEM reduces reliance on costly physical testing and provides a robust tool for optimising FRP joint design, supporting the future development of design guidelines for pultruded FRP structures.
Year:
2025
Year:
2025
This study develops and validates a simulation driven, human centric lighting framework for UK residential buildings that integrates circadian and biophilic design, daylight harvesting, and dynamic smart controls using DIALux Evo. A comparative quantitative design was adopted to evaluate traditional manual calculation versus simulation based optimisation across twenty lighting scenes in one bedroom flats, under identical spatial and environmental conditions and in compliance with EN 12464 1 and CIBSE LG standards. Performance was assessed using electrical energy consumption (kWh), average illuminance (lux), and luminous efficacy (lm/W), with statistical validation via paired t tests. The optimised design reduced mean energy consumption from 10.25 kWh to 8.68 kWh (t = 5.12, p = 1.2×10⁻⁵), increased mean illuminance from 94.36 lux to 116.93 lux (t = 7.095, p = 1.0×10⁻⁶), and improved luminous efficacy from 57.2–65.65 lm/W to 98.25–105.35 lm/W across living, kitchen, bedroom, and bathroom areas. Although a minority of scenes showed neutral or adverse energy outcomes, the dominant trend evidences statistically significant reductions in demand and enhanced lighting quality. The contribution is a reproducible and standards aligned methodology that advances best practice for low carbon residential lighting, with actionable guidance for architects, engineers, and policymakers pursuing Net Zero targets and occupant well being.
Year:
2025
This study presents a finite element investigation of bolted beam-to-column connections in pultruded fibre-reinforced polymer (FRP) profiles using FRP cleats and steel bolts. Numerical simulations were performed in ABAQUS under monotonic and cyclic loading to evaluate moment–rotation behaviour, initial stiffness, and delamination initiation at the fillet radius of FRP cleats. Progressive damage modelling was implemented using Hashin’s failure criterion with fracture energies derived from standard ASTM tests. The model was validated against experimental results, demonstrating close agreement in stiffness, moment resistance, and failure modes. A subsequent parametric study examined the influence of cleat dimensions, bolt size, and bolt-hole clearance. The findings show that while moment resistance remains largely unaffected by these parameters, joint stiffness is sensitive to cleat geometry and bolt characteristics. The validated numerical framework provides a reliable tool for predicting the behaviour of FRP joints, reducing reliance on costly experimental testing, and supporting the design of practical FRP structures.
Year:
2025
Year:
2023
Year:
2022
Year:
2022
Year:
2021
Year:
2020
Year:
2020
Year:
2020
Year:
2020
Make your next move.
Prepare your application
Review drafts before you send them.