Jeongmoo Huh

Assistant Professor

United Arab Emirates University
Country flagUnited Arab Emirates

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (7)

Year:

2025

Year:

2025

Year:

2025

Year:

2025

The performance of two solid biomass wastes, date stone and jojoba solid waste, was experimentally examined for their potential application in combustion and propulsion systems. The fuels were tested in a hybrid rocket-like combustion environment, and the test result was analyzed with combustion and propulsion parameters. The performance of both fuels was comparatively evaluated and compared with a conventional hydrocarbon fuel in a hybrid rocket, with paraffin wax serving as a baseline. A compression device was introduced to compress the solid biomass wastes into a circular-shaped fuel grain compatible with a hybrid rocket combustion chamber with a hot surface ignitor. Thermogravimetric analysis (TGA) and chemical equilibrium analysis (CEA) results revealed that the performance of the biomass fuel can be comparable to conventionally used hydrocarbon paraffin-wax-based propellant within a certain range of oxidizer-to-fuel ratio, in terms of theoretical specific impulse performance. Through experimental performance tests, it was found that the compressed biomass fuel grains were successfully ignited and produced thrust. Both biomass fuels tested in a hybrid rocket combustion chamber are expected to pave the way for further developments in biomass fuels in the waste-to-energy field for their application in combustion and propulsion systems, potentially replacing fossil fuels with renewable resources.

Year:

2024

Year:

2024

This paper reports on the effect of structural materials on heat loss-associated propulsion performance degradation of monopropellant thrusters in the micro scale. In order to address the effect of fabrication materials on heat loss, propellant flow characteristics, and propulsion performance, a conjugate heat transfer numerical study has been conducted considering several practical substrate candidates for microthrusters. The results were analyzed with respect to the thermal diffusivity of the materials, which revealed different propulsion performance characteristics and inner nozzle flow characteristics due to varying amounts of heat loss, depending on the microfabrication materials used and propellant enthalpies. Regardless of propellant enthalpies, however, there was a dramatic degradation in the amount of the thrust produced with respect to thermal diffusivity, particularly in the range of low thermal diffusivity. Glass, among the material types compatible with fabrication processes in regard to microthrusters, exhibited a 4% degradation in thrust performance for the 50 mN class microthruster considered, with the least degradation, while copper, with 7% degradation, exhibited the greatest amount of degradation among the materials considered. With varying chamber pressure and Mach number at the nozzle exit depending on structural materials, the results also indicated the necessity of heat loss consideration in a microthruster design process.

Year:

2023

Collaborators (3)

Mohamed Y. E. Selim

Professor

College of Engineering

UNITED ARAB EMIRATES
View details

Ki Sun Park

College of Engineering

UNITED ARAB EMIRATES
View details

Mohammad Ali Abdelkareem

-

UNITED ARAB EMIRATES
View details