Jerzy Jackowski

This article deals with the influence of the elastic-damping properties (energy losses) of tired wheels on the results of the evaluation of the technical condition (dynamic properties) of automotive suspensions carried out on the diagnostic line. The purpose of this paper is to point out the inadequacies of test stands for assessing the technical condition of vehicle suspensions. The diagnostic line used in the testing featured two testing stations. The test object was a passenger car with hydro-pneumatic suspension. This enabled the conducting of suspension tests for two settings (comfort and dynamic positions). The tests were conducted for four different air pressures in the tyres of tired wheels. This made it possible to determine, for each wheel, four graphs of the load versus tyre deflection (radial stiffness characteristics). These graphs were used to determine the values of the stiffness coefficients, energy loss, and damping characteristics as well as to identify the correlation between the directional coefficient of the regression line of the elastic and damping characteristics of the tyres and the indices characterising the damping properties of the suspension of the test car. This paper shows that the result of the shock absorber condition assessment is significantly influenced by the elastic and damping properties of the tired wheels, caused by changes in tyre pressure.

Selected structures intended to absorb impact energy have been analysed in respect of their use in the rear underrun protective devices (RUPD) of motor trucks. The main purpose of the RUPD is to prevent a passenger car from running under the rear of a motor truck provided with such a device. From the point of view of the safety of the car occupants, it is important to take into account the components whose additional role would be to absorb a part of the impact energy so that the loads on the said occupants were minimised. This article presents experimental test results concerning selected energy-absorbing structures. Based on quasi-static strength tests, simplified material models were defined. As a result of experimental crash tests, the possible applications of selected energy absorbers to the RUPDs as their components accountable for the passive safety of passenger cars were indicated. Absorbers proposed in this paper can be considered effective energy-absorbing structures, e.g., in the case of the central impact of a medium-class car with a speed of about 40 km/h. They are relatively inexpensive in production and easily implementable to motor trucks, even taking into account some limitations related to the type-approval regulations on the European market.