Jure Žigon

PhD Assistant

University of Ljubljana
Country flagSlovenia

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (8)

Year:

2026

Year:

2026

Year:

2025

Year:

2025

This paper describes the use of microcrystalline cellulose (MCC) as an additive in wood-polylactic acid (PLA) filaments suitable for 3D printing. Filaments prepared with PLA, thermally modified (TM) wood, and three different MCC loadings (1, 3, and 5 wt%) by two-step melt blending in the extruder were characterized with respect to their rheological, thermal, and mechanical response. The analyses demonstrate that a low MCC content (1%) improves the mobility of the polymer chains and contributes to a higher elasticity of the matrix chain, a higher crystallinity, a lower glass transition temperature (by 1.66 °C), and a lower melting temperature (by 1.31 °C) and leads to a higher tensile strength (1.2%) and a higher modulus of elasticity (12.1%). Higher MCC loading hinders the mobility of the polymer matrix and leads to a rearrangement of the crystal lattice structure, resulting in a decrease in crystallinity. Scanning electron micrographs show that the cellulose is well distributed and dispersed in the PLA matrix, with some agglomeration occurring at higher MCC levels. The main objective of this study was to develop and evaluate a filament containing an optimal amount of MCC to improve compatibility between wood and PLA, optimize melt processability, and improve mechanical properties. It can be concluded that a 1% addition of MCC favorably changes the properties of the wood–PLA filaments, while a higher MCC content does not have this effect.

Year:

2024

Flame treatment is an ancient technique for surface protection of wood. Further processing of charred wood elements depends on aesthetic and protective requirements. This study presents some general properties and weathering behaviour of the Norway spruce (Picea abies (L.) Karst.) and the European larch (Larix decidua Mill.), protected by variations of sanding, charring, charring + brushing, and coating treatments. Charring and charring + brushing reduced the original mass of the samples by up to 8% and notably changed their colour (ΔE* ≤ 75). A study of chemical properties showed that charring dehydrated the wood and degraded lignin and hemicelluloses. The surface roughness of the wood after charring and charring + brushing increased by as much as 560%, while coating with waterborne acrylic high build stain had no effect on the roughness of these surfaces. The type of surface treatment of the wood did not affect the uptake of the coating in the wood samples, but the uncoated and coated spruce wood absorbed more water than larch wood. Higher water absorption was observed in the samples treated by charring, and it decreased when the char layer was removed by brushing. The film of a waterborne high build stain reduced water uptake only for surfaces treated by sanding and charring + brushing. Larch wood exhibited higher surface hardness (EHz ≤ 1.70 MPa) than spruce wood (EHz ≤ 0.89 MPa), with the brittle char layer reducing the determined hardness of the tested surfaces. During two years of natural weathering, the char layer was removed from the wood surface, even if the samples were additionally coated. The greatest colour changes during weathering were observed on samples treated by sanding (ΔE* ≤ 60) and sanding + coating (ΔE* ≤ 33), followed by samples treated with charring + brushing (ΔE* ≤ 10) and samples treated with charring (ΔE* ≤ 9). In summary, treating wood by charring in combination with brushing was the best wood protection technique.

Year:

2023

Year:

2023

Year:

2023

Collaborators (9)

Zeljka Fiket

Head of laboratory - Senior Research Associate

Ruđer Bošković Institute

CROATIA
View details

Matjaž Pavlič

-

SLOVENIA
View details

Mirko Kariž

-

SLOVENIA
View details

Angela Balzano

Researcher

University of Ljubljana

SLOVENIA
View details

Israel Diaz

Associate Professor

Universidad de Valladolid

SPAIN
View details

Mirna Petkovic Didovic

associate professor

University in Rijeka

CROATIA
View details

José Gonçalves

Researcher

Universidade Nova de Lisboa

PORTUGAL
View details

Davor Kržišnik

Assistant Professor

-

SLOVENIA
View details

Aleš Straže

Assoc. Prof

-

SLOVENIA
View details