Katherina Haase

Technische Universität Dresden
Country flagGermany

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (13)

Year:

2026

Ionic devices, such as electrochemical capacitor diodes (CAPodes) and gate-controlled CAPodes with transistor-like gating characteristics (G-CAPodes), offer a novel approach to energy-efficient and nature-inspired logic computing. Their miniaturization and integration render them ideal for ion-transistor circuits, enabling the regulation and signaling of ions and biomolecules. Here, we report an asymmetric system to achieve a potential-driven ion pump for CAPode based on a redox-active Keggin-type electrolyte. This unidirectional capacity is achieved through asymmetric polarization between a plane metal and a porous carbon electrode, enabling selective redox reactions on the metal surface. The nanoporous carbon effectively balances the charge on the redox electrode, while redox couples control the working voltage range. Printed ionologic devices are demonstrated for logic gates, and an integrated NAND (NOT-AND) circuit was constructed using two CAPodes and one G-CAPode. This work proposes a concept for switchable iontronic devices, providing a deeper understanding and applicability of these devices.

Year:

2025

Here, an Isoindigo (IID) comprised with Naphthodithiophene (NDT)‐based low band‐gap donor–acceptor copolymer semiconductor is designed, synthesized, and investigated. The newly reported polymer provides good solubility in a range of halogenated and non‐halogenated solvents due to the attachment of long branched alkyl chains on the Isoindigo core. After optimizing the performance of organic field effect transistors (OFETs) through the use of high‐boiling‐point chlorinated solvents, A similar approach is followed to realize transistors without the need of using halogenated solvents as a green approach. Well‐working transistors are shown with mobility values in a similar range as obtained for OFETs with films prepared from halogenated solvents, while significantly reducing the environmental impact. Finally, all‐solution‐processed, flexible OFETs are prepared without the use of halogenated solvents, which is an important step in the view of potential large area production of flexible electronics.

Year:

2025

A straightforward method is developed to produce ion‐gels (IGs) with surface roughness at the nanometer level using a solution‐shearing process, enabling the first successful growth of crystalline, small‐molecule organic semiconductor (OSC) films directly on the IG layer. The effectiveness of this approach is demonstrated by fabricating top‐contact electrolyte‐gated organic field‐effect transistors (EGOFETs) using thermal vapor deposition and solution‐shearing. The gel matrix consists of polymethyl methacrylate (PMMA) or its blend with poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF:HFP), and 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMI][TFSI]) serves as ionic liquid. X‐ray photoemission spectroscopy (XPS) reveals that the shearing speed controls the polymer phase separation in the blended gels, producing capacitance values of up to 10.1 µF cm − 2 . The exceptional smoothness of the gel films permits vacuum deposition polycrystalline films of 2,7‐dioctyl[1]benzothieno[3,2‐b][1]benzothiophen (C8‐BTBT), dinaphtho[2,3‐b:2′,3′‐f]thieno[3,2‐b]thiophen (DNTT), and 2,9‐didecyldinaphtho[2,3‐b:2′,3′‐f]thieno[3,2‐b]thiophene (C10‐DNTT), and solution‐shearing of C8‐BTBT and 6,13‐bis(triisopropylsilylethynyl)pentacene (TIPS‐pentacene) on their surfaces. Grazing incidence wide‐angle X‐ray scattering (GIWAXS) can now be conducted directly on the OSC films without obstruction by the gel. EGOFETs with minimal hysteresis and mobilities up to 1.46 cm 2 V −1 s −1 are obtained for C10‐DNTT. This study underscores the possibility of producing transistor‐grade polycrystalline organic semiconductor films on top of IGs, making them attractive for surface characterization techniques and in situ measurements.

Year:

2025

This work reports phototransistor memory devices fabricated using organic planar heterojunctions of two organic semiconductor materials, namely poly(2,5‐bis(2‐octyldodecyl)−3,6‐di(pyridin‐2‐yl)‐pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione‐alt‐2,2′‐bithiophene) (PDBPyBT) and 2,9‐didecyldinaphtho[2,3‐b:2′,3′‐f]thieno[3,2‐b]thiophene (C10‐DNTT). The results of the study show a broad spectral sensitivity, ranging from UV light to red light. It is found that both organic layers are photoactive but also both play a role in the device's charge‐trapping properties: the PDBPyBT layer is effective in trapping holes while the C10‐DNTT layer traps electrons. The thickness of the PDBPyBT layer is identified as a crucial factor affecting the device performance, with the devices featuring a ≈20 nm thick PDBPyBT layer exhibiting a light‐induced hysteresis of ≈40 V. While the devices with a “ribbon” structured PDBPyBT layer demonstrate a linear response to the increasing light exposures duration. Furthermore, a new method is introduced to evaluate the external quantum efficiency (EQE) of the phototransistor memories in order to provide a robust metric that allows a benchmarking comparison of such devices' performance. When assessed using this EQE metric, these devices exhibit exceptionally high efficiency of trapping photogenerated charges compared to other reports. This study also demonstrates that the devices possess multibit programming capabilities, suggesting their potential use in dosimetry applications.

Year:

2025

Sol–gel‐based solution‐processed metal oxides have emerged as a key fabrication method for applications in thin film transistors both as a semiconducting and a dielectric layer. Here, a low‐temperature, green solvent‐based, non‐toxic, and cost‐effective solution shearing approach for the fabrication of thin aluminum oxide (AlO x ) dielectrics is reported. Optimization of sustainability aspects like energy demand, and selection of chemicals used allows to reduce the environmental impact of the life cycle of the resulting product already in the design phase. Using this approach, ultra‐thin, device‐grade AlO x films of 7 nm are coated—the thinnest films to be reported for any solution‐fabrication method. The metal oxide formation is achieved by both thermal annealing and deep ultra‐violet (UV) light exposure techniques, resulting in capacitances of 750 and 600 nF cm −2 , respectively. The structural analysis using microscopy and x‐ray spectroscopy techniques confirmed the formation of smooth, ultra‐thin AlO x films. These thin films are employed in organic field‐effect transistors (OFETs) resulting in stable, low hysteresis devices leading to high mobilities (6.1 ± 0.9 cm 2 V −1 s −1 ), near zero threshold voltage (−0.14 ± 0.07 V) and a low subthreshold swing (96 ± 16 mV dec −1 ), enabling device operation at only ±0.5 V with a good I on / I off ratio (3.7 × 10 5 ).

Year:

2024

Here, the effect of thermal annealing (TA) on the stability of solution‐sheared thin films of the semiconducting polymer poly[2,5‐bis(2‐octyldodecyl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione‐3,6‐diyl)‐alt‐(2,2′;5′,2′’;5′’,2′’’‐quaterthiophen‐5,5′’’‐diyl)] (PDPP4T) against the original coating solvent is studied, and it is shown that TA significantly improves the solvent resistance of semiconducting polymer films. Specifically, after the thin films are annealed at or above a critical temperature, the thin film thickness is largely retained when exposed to the original solvent, while for lower annealing temperatures material loss occurs, i.e., the thin film thickness is reduced due to rapid dissolution. The results of various techniques including grazing‐incidence wide‐angle x‐ray scattering (GIWAXS), atomic force microscopy (AFM), and ultraviolet‐visible‐near infrared (UV–vis‐NIR) absorption spectroscopy suggest physical changes as the cause for the increased solvent resistance. Such annealed films also show stable electrical characteristics in bottom‐gate, top‐contact (BGTC) organic field‐effect transistors (OFETs) even after solvent exposure. In initial tests, a multitude of technologically relevant polymers show such behavior, underlining the potential impact of such temperature treatments for the fabrication of multi‐layer polymer devices.

Year:

2024

Year:

2024

Synthetic insecticides are widely used against plant pest insects to protect the crops. However, many insecticides have poor selectivity and are toxic also to beneficial insects, animals, and humans. In addition, insecticide residues can remain on fruits for many days, jeopardizing food safety. For these reasons, a reusable, low‐cost electronic trap that can attract, detect, and identify, but attack only the pest while leaving beneficial insects unharmed could provide a sustainable, nature‐friendly replacement. Here, for the first time, research results are presented suggesting the great potential and compatibility of organic electronic devices and technologies with pest management. Electrical characterizations confirm that an insect's body has relatively high dielectric permittivity. Adaptive memcapacitor circuits can track the impedance change for insect detection. Other experiments show that printed polymer piezoelectric transducers on a plastic substrate can collect information about the weight and activity of insects for identification. The breakdown voltage of most insects´ integument is measured to be <200 V. Long channel organic transistors easily work at such high voltages while being safe to touch for humans thanks to their inherent low current. This feasibility study paves the way for the future development of organic electronics for physical pest control and biodiversity protection.

Year:

2023

Organic phototransistors can enable many important applications such as nonvolatile memory, artificial synapses, and photodetectors in next‐generation optical communication and wearable electronics. However, it is still a challenge to achieve a big memory window (threshold voltage response ∆ V th ) for phototransistors. Here, a nanographene‐based heterojunction phototransistor memory with large ∆ V th responses is reported. Exposure to low intensity light (25.7 µW cm −2 ) for 1 s yields a memory window of 35 V, and the threshold voltage shift is found to be larger than 140 V under continuous light illumination. The device exhibits both good photosensitivity (3.6 × 10 5 ) and memory properties including long retention time (>1.5 × 10 5 s), large hysteresis (45.35 V), and high endurance for voltage‐erasing and light‐programming. These findings demonstrate the high application potential of nanographenes in the field of optoelectronics. In addition, the working principle of these hybrid nanographene‐organic structured heterojunction phototransistor memory devices is described which provides new insight into the design of high‐performance organic phototransistor devices.

Year:

2023

Year:

2023

Year:

2023

Year:

2023

Collaborators (10)

Vithya Saahar Sethu Madhavan

Queensland University of Technology

AUSTRALIA
View details

Ahmed Bahrawy

assistant lecturer

TU Dresden

GERMANY
View details

Bahman K. Boroujeni

-

GERMANY
View details

Sebastian Reineke

Academic Staff, Full Professor

Technische Universität Dresden

GERMANY
View details

Lautaro Petrauskas

Technische Universität Dresden

GERMANY
View details

Susanne Boye

Scientist

Leibniz-Institut für Polymerforschung eV

GERMANY
View details

Stefan C. B. Mannsfeld

-

GERMANY
View details

Christina Dornack

Director, Professor

Technische Universität Dresden

GERMANY
View details

Prashant Sonar

Professor

Queensland University of Technology

AUSTRALIA
View details

Peixun Xiong

Research Professor (Brain Pool Research Fellow)

Sungkyunkwan University

SOUTH KOREA
View details