Ke Du

Reducing methane (CH4) emissions from anthropogenic activities is critical to climate change mitigation efforts. However, there is still considerable uncertainty over the amount of fugitive CH4 emissions due to large-scale area sources and heterogeneous emission distributions. To reduce the uncertainty and improve the spatial and temporal resolutions, a new hybrid method was developed combining optical remote sensing (ORS), computed tomography (CT), and inverse-dispersion modeling techniques on the basis of which a multi-path scanning system was developed. It uses a horizontal radial plume mapping path configuration and adapts a Lagrangian stochastic dispersion mode into CT reconstruction. The emission map is finally calculated by using a minimal curvature tomographic reconstruction algorithm, which introduces smooth constraints at each pixel. Two controlled-release experiments of CH4 were conducted with different configurations, showing relative errors of only 2% and 3%. Compared with results from the single-path inverse-dispersion method (5–175%), the new method can not only derive the emission distribution but also obtain a more accurate emission rate. The outcome of this research would bring broad application of the ORS-CT and inverse-dispersion techniques to other gases and sources.