Ladislav Dzurenda

profesor

technical university in zvolen
Country flagSlovakia

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (2)

The paper analyzes the color of dry wood of false heartwood in the color space CIE L*a*b*. The color of dry European beech wood with false heartwood perceived by the human eye is in a wide range of shades from light to brown-yellow to red-brown. The color of the wood of the false heartwood in the color space CIE L*a*b* was measured with a Color reader CR-10 colorimeter (Konica Minolta, Japan). A D65 light source was used and the diameter of the optical sensing aperture was 8 mm. The results of the statistical processing of the measured values of the color of dry beech wood, false heartwood on the planed surface is identified through the values on the lightness coordinate L* = 65.9 4.8 and on the chromatic coordinates: red color a* = 12.7 2.1 and yellow b* = 20.3 1.9. The colourfulness of the darkness and yellow-brown-red shades of wood of the false heartwood is numerically quantified by the total color difference ΔEsx* = 5.5.The presented values of the color of false heartwood beech wood and the definition of color boundaries in the color space CIE L*a*b* create space for designers to model the color variety of compositions and construction and joinery products made of beech wood.

Year:

2023

The paper discusses the particle size of the chips formed in the process of machining unsteamed and steamed alder wood on a CNC machining center. From the granulometric analysis of the chips, it follows that the average share of the coarse fraction of the chips created from unsteamed alder wood is 66.0% and steamed alder wood is 62.9%. The representation of medium-coarse fractions of alder wood with dimensions of 1.0-0.125 μm in unsteamed wood is 29.5% and steamed by 32.7%. Dust fractions with dimensions below 125 μm in unsteamed alder wood account for 4.5% and in steamed alder wood 4.4%. Chips of non-steamed or steamed alder wood with dimensions below 32 μm were not measured, so it can be concluded that no respirable dust particles with dimensions below < 10 μm are formed. Changes in the physical and mechanical properties of steamed alder wood are manifested by a decrease in the coarse fraction above 2 mm and an increase in the fraction of chips 0.125 to 2000 μm. For the separation of chips, both unsteamed and steamed alder wood, from the transport air, fabric filters and filter fabric Finet PES 4 are suitable, the separation limit of which is smaller than the size of the smallest chips formed in the milling process: aMO = 7 m <<< amin = 32 m.

Year:

2023

Collaborators (2)

Adrian Banski

-

SLOVAKIA
View details

Michal Dudiak

technical university in zvolen

SLOVAKIA
View details