Larbi Chrifi-Alaoui

The overexploitation of non-renewable fossil resources has led to dangerous warming of our planet due to greenhouse gas emissions. The main reason for this problem is the increase in global energy demand. The rising prices of oil and gas have pushed governments around the world to turn to renewable energy, especially solar and wind power. For this reason, the present paper aimed to focus on photovoltaic and wind energy systems. However, exploitation of these two sources individually is not always easy because of their intermittent and irregular characters. Therefore, the obvious solution is the hybridisation of these two sources, which, when used alongside other systems such as batteries, increases the reliability, availability, and efficiency of these renewable sources. The main objective of this paper is to give an overview of different configurations of hybrid solar and wind energy conversion systems. First, the behaviour of each system, as well as their mathematical models, characteristics, and existing topologies, is presented. Then, the control strategies, optimal configurations, and sizing techniques, as well as different energy management strategies, of these hybrid PV–wind systems are presented.

In this paper, a robust current control of the hybrid renewable energy system (HRES), based on the PV-Wind system, is proposed. The HRES is connected to a multiport converter to synchronize the multi-source system with one DC-Bus. Due to their ability to integrate many renewable energy sources (RES) individually or simultaneously, multiport converters (MPC) are an innovative method suitable for renewable energy applications. Recently, many DC-DC converter designs and topologies have emerged to ensure the highest possible efficiency of hybrid RESs. The multiport converter is a typical coupling system with several modes of operation. Thus, the design of its controller become complicated. To stabilize the DC-Bus voltage, a battery has been added to the system. In this HRES configuration, all sources are connected in parallel via the multiport DC converter. We used the multiport DC converter to minimize the intermittent character of solar and wind and control the energy flow between the different power sources and the load, as well as to increase the performance of the system. The nonlinear robust control structure is based on Lyapunov approach to overcome the nonlinear model of the system to improve robustness and guarantees the asymptotic stability. The proposed control law is implemented and tested on dSPACE-DS1104. The results show the effectiveness and the feasibility of the proposed controller.