M. H. Ferri Aliabadi

This paper describes a study that focuses on assessing the influence of composites with different thicknesses (2 mm, 4 mm, and 9 mm) on embedded ultrasonic guided waves (UGWs) under varying temperatures. The study also demonstrates the effectiveness of these embedded sensors in identifying damage. A novel cut-out method that included an embedded diagnostic layer and phased-array lead zirconate titanate (PZT) transducers, created using the ink-jet printing technique in the manufacturing process was employed. The research then focused on studying the behavior of UGWs under varying temperatures for each composite panel. This analysis aimed to understand how temperature variations affected the propagation of guided waves in thick composites. Finally, artificial damage on the surface and impact damage were introduced, both embedded and surface-mounted PZT transducers were used to detect and locate these damages in different thickness composite panels. The results of damage localization indicated that the embedded PZT transducers were more sensitive than the surface-mounted transducers in locating the damage in thick composites.