Man Hoi Wong
Associate Professor
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (4)
Gallium oxide (Ga2O3) is renowned for its exceptional physical and chemical properties, making it an ideal material for solar-blind photodetectors. In this study, Sn-doped-Ga2O3 microwires (MWs) were utilized to fabricate a type-I heterojunction photodetector with SnSe2. The Sn-doped-Ga2O3 MW/SnSe2 hybrid van der Waals heterojunction exhibits both direct tunneling and Fowler–Nordheim tunneling under positive voltages. By exploiting the Fowler–Nordheim tunneling mechanism at a 6 V bias, the device demonstrates outstanding performance under 254 nm illumination, achieving a rectification ratio of 104–105, an ultralow dark current of 0.11 pA, a responsivity of 81.82 A/W, a detectivity of 7.79 × 1014 Jones, and an exceptionally high external quantum efficiency of 4 × 104%. These impressive characteristics make the heterojunction photodetector highly suitable for high-quality imaging applications. This research offers a promising processing solution for Ga2O3-based optoelectronic devices, further extending their potential for versatile solar-blind detection and imaging applications.
Year:
2025
In this paper, a three dimensional (3D) model was built to elucidate the formation mechanism of the dislocation line, the surface morphology evolution with changing of the cutting angle, and the shape of etched pits after the chemical-mechanical polishing (CMP) process of a (001) homoepitaxial film. The dislocation line of an angle at approximately 60° with respect to the (001) plane observed from the [100] direction originates from the intersection line between the principal (100) plane of the nanopipe and the (11-1) plane in the quasi-tetrahedron region of the (010) plane surface. The surface morphology transition from a groove to a triangular pit is related to inheriting the cutting shape of nanopipes on the (001) surface. The appearance of chevron-shaped etching pits on CMP processed (001) homoepitaxial film can be explained by exposing two lateral (111) and (1-11) facets as sidewall, with the (100) facet remaining as the central core in the defect position after anisotropic wet etching. The 3D model also provides the possibility to explain the different angles and the Burgers vector of dislocation lines in single-crystal substrates, which is due to diverse sidewall planes of the nanopipe intersection with the planes in the quasi-tetrahedron region of the (010) plane.
Year:
2025
This work reveals the significant advantages of high-temperature nitrogen (N) ion implantation for fabricating current-blocking layers (CBLs) in β-Ga2O3. A comparative investigation on the structural and electrical properties of N-implanted β-Ga2O3 was conducted under different implantation temperatures and post-implantation annealing (PIA) conditions. The results showed that the high-temperature implantation (HTI) at 500 °C, compared to the room-temperature implantation (RTI), introduced fewer structural defects and less lattice distortion to β-Ga2O3. The HTI-formed CBL demonstrated a far superior current-blocking capability than those formed by the RTI with/without a PIA, in terms of a much lower and more stable leakage current and a significantly enhanced breakdown voltage. Additionally, lateral MOSFETs fabricated with the HTI isolation exhibited a three orders of magnitude lower off-state leakage current while maintaining excellent on-state performance, compared to those using the isolation formed by RTI with PIA. These findings indicate that the in situ dynamic annealing effect of HTI effectively reduces implantation-induced damage, enhances impurity activation, and improves the overall performance of the N-implanted CBLs in β-Ga2O3.
Year:
2025
This study provides a comprehensive analysis of the dominant deep acceptor level in nitrogen-doped beta-phase gallium oxide (β-Ga2O3), elucidating and reconciling the hole emission features observed in deep-level optical spectroscopy (DLOS). The unique behavior of this defect, coupled with its small optical cross section, complicates trap concentration analysis using DLOS, which is essential for defect characterization in β-Ga2O3. A complex feature arises in DLOS results due to simultaneous electron emission to the conduction band and hole emission to the valence band from the same defect state, indicating the formation of two distinct atomic configurations and suggesting metastable defect characteristics. This study discusses the implications of this behavior on DLOS analysis and employs advanced spectroscopy techniques such as double-beam DLOS and optical isothermal measurements to address these complications. The double-beam DLOS method reveals a distinct hole emission process at EV+1.3 eV previously obscured in conventional DLOS. Optical isothermal measurements further characterize this energy level, appearing only in N-doped β-Ga2O3. This enables an estimate of the β-Ga2O3 hole effective mass by analyzing temperature-dependent carrier emission rates. This work highlights the impact of partial trap-filling behavior on DLOS analysis and identifies the presence of hole trapping and emission in β-Ga2O3. Although N-doping is ideal for creating semi-insulating material through the efficient compensation of free electrons, this study also reveals a significant hole emission and migration process within the weak electric fields of the Schottky diode depletion region.
Year:
2024
Collaborators (4)
Steven A. Ringel
Research Scientist
Ohio State University
Uttam Singisetti
University at Buffalo
Steven A. Ringel
-
Hongwei Liang
Dalian University of Technology
Make your next move.
Prepare your application
Review drafts before you send them.