Markus Knobloch

Head of Institute | Professor of Steel, Timber and Composite Structures

University of Stuttgart
Country flagGermany

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (21)

Year:

2026

Year:

2025

Year:

2025

Castellated steel beams, characterised by their unique perforated web design, have gained significant popularity in the construction of medium‐span structures, like industrial and office buildings. These beams offer an economical solution due to their increased bending moment capacity about the major axis with relatively low weight and associated high resource efficiency. However, they are particularly susceptible to lateral‐torsional buckling as a result of their increased cross‐sectional height. Additionally, the regularly spaced openings weaken the web, leading to further local failure modes. For simplified design methods, boundary conditions are usually incorporated through the elastic critical moment, which itself is influenced by possible local failure modes, such as web distortions. This paper investigates the influence of various boundary conditions on the analytical computation of the elastic critical moment according to the draft Technichal Report CEN/TR 1993‐1‐102:2025 and the lateral‐torsional buckling design according to the 2nd Gen EN 1993‐1‐1:2022 for castellated steel beams in comparison to regular hot‐rolled profiles within a comprehensive numerical and analytical study.

Year:

2025

Year:

2025

Welded hollow section trusses are commonly used in structures such as pedestrian bridges and crane girders. High‐strength steels (HSS) enable increased load capacity and reduced weight, but their limited ductility restricts plastic stress redistribution, which is typically assumed in current design rules for mild‐strength steels (MSS) to mitigate local stress concentrations. To account for the reduced ductility of HSS, reduction factors are applied to the design rules for MSS for steel grades above S355. However, these factors are overly conservative and insufficiently calibrated due to limited experimental data on HSS joints. This article presents an experimental and numerical study on K‐joints made from circular and square hollow sections of HSS, aiming to reassess the existing material reduction factors. Damage mechanics‐based material models calibrated through extensive testing are used in finite element simulations to capture joint behaviour up to failure. The numerical models are validated against large‐scale tests on HSS K‐joints. The present study includes 19 experimentally and 580 numerically investigated joint configurations, mainly made of S460NH and S620QH. Key findings include the consistent occurrence of punching shear failure as the decisive failure mode. While current design rules lead to mostly safe structural designs, differentiating reduction factors considering the failure mode and steel grade could enable a more efficient and material‐optimised design of HSS joints.

Year:

2025

Abstrakt Um den Baubedarf infolge alternder Infrastruktur, Bevölkerungswachstum und Urbanisierung zu decken, bedarf es umfangreicher Bautätigkeiten. Gleichzeitig erfordern die zwingend notwendige Eindämmung der Klimakrise und der verantwortungsvolle Umgang mit Ressourcen neue Strategien in der Bauindustrie. Der Stahlbau bietet großes Potenzial für zukunftsfähige Konstruktionen, besonders durch Chancen des Weiterbetriebs auch durch vergleichsweise einfach realisierbare Verstärkungsmaßnahmen, der Möglichkeit zum Recycling ohne Qualitätsverluste und der Wiederverwendung von Bauteilen in neuem strukturellem Kontext (Reuse). Reuse von Bauteilen kann entscheidend zu einer „Zirkulären Unendlichkeit“ sowie gesteigerter Nachhaltigkeit im Bauwesen beitragen. Die Vision der Zirkulären Unendlichkeit beschreibt unendliche Kreisläufe aus Produktion, Fertigung, Nutzung und Reuse/Recycling von Bauteilen von Gebäuden und Infrastrukturen. Deren Realisierung erfordert ein Umdenken in Planung, Entwurf und Konstruktion von Tragstrukturen. End‐of‐Life‐Szenarien mit strategischem Einsatz von Reuse und Recycling rücken in den Fokus der Planung, Realisierung und Nutzung von Bauwerken und erfordern Konzepte für die zuverlässige Bemessung wiederverwendeter Bauteile und die quantitative Bewertung der Nachhaltigkeit und Zukunftsfähigkeit. Eine enge Zusammenarbeit zwischen Forschung, Industrie, öffentlicher Hand und Normungsgremien wird benötigt, um diese Innovationen schnell erfolgreich in die Praxis umzusetzen.

Year:

2025

Year:

2025

Year:

2025

Year:

2025

Year:

2025

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2023

Collaborators (2)

Markus Feldmann

Univ. Prof. Dr.-Ing

RWTH Aachen University

GERMANY
View details

Matthias Albiez

Karlsruhe Institute of Technology (KIT)

GERMANY
View details