Maxim Zhuravskij
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (5)
Year:
2025
A method is proposed for geometric modeling of a family of blast wave fronts reflected from a cylindrical surface of a sinusoidal profile. The model of “optical” reflection is adopted as a basis, when for each incident virtual explosive “ray” the angle of reflection is equal to the angle of incidence. To illustrate the graphic-analytical approach, a test model of the formation of a family of reflected wave fronts for a cylindrical parabolic surface has been developed. A cylindrical surface of a sinusoidal profile obtained by bending a rectangular metal sheet by longitudinal forces is considered. Geometric models of a family of blast wave fronts reflected from a cylindrical surface of a sinusoidal profile are described. Maple has been compiled – programs for visualizing models of a family of blast wave fronts reflected from a cylindrical surface. Conducted studies of sinusoidal cylindrical reflectors designed to demonstrate the effect of multiplying the effects of shock blast waves directed towards the fire zone. For their practical use, it is necessary to find the bending parameters of the cylinder such that the virtual beams of the “point” explosive are transformed into a system of beams that are close to parallel in the fire zone. As a result of the research, the parameters of bending of a metal rectangular sheet by longitudinal forces were calculated, and the coordinates of the location of the “point” explosive substance were determined. It is taken into account that cylindrical reflectors with a sinusoidal profile can be manufactured at the site of their use. To do this, a rectangular sheet of metal must be bent by longitudinal forces and the bend must be fixed by welding reinforcement rods. The research carried out is aimed at developing the technology of extinguishing forest fires with directed explosions.
Year:
2023
This paper reports the analysis of fire resistance assessment methods of building structures. Based on the results, it was established that conducting fire tests is not expedient and harmful to the environment. The use of estimation fire resistance assessment methods for reinforced concrete staircases is not considered possible due to the lack of appropriate tables with fire resistance classes for the tabular method. The use of the estimation zone method is also impossible because of the lack of temperature nomograms of temperature distribution during exposure to the standard fire temperature regime. There are also no described procedures for applying the estimation refined method for reinforced concrete staircases. So, using mathematical models, the existing type of reinforced concrete staircase was reproduced. Employing the finite-element method, the behavior of reinforced concrete stairwells under the influence of fire was investigated. Based on the results of these experiments, it was analyzed which structural geometric parameters of reinforced concrete stairwells have the greatest influence on their fire resistance. In this way, three independent, most significant geometric parameters of reinforced concrete stairwells were established – the height of the solid base, the thickness of the protective layer of the lower row of reinforcing bars, and the length of the span. Therefore, the ranges of the most significant structural geometric parameters of reinforced concrete stairwells were used to build a regression dependence of the fire resistance limit on these parameters in order to design a full factorial numerical experiment. After proving the adequacy of the results obtained according to the regression dependence, tables were constructed with the geometric parameters of reinforced concrete stairwells to determine the compliance of these structures with the required fire resistance class. The use of these tables will make it possible to reduce the risks of threats to human life and health during a fire by determining the possibility of using these structures with a guaranteed fire resistance class during design
Year:
2023
Year:
2023
Year:
2021
Collaborators (3)
Eugene Tishchenko
-
Olena Petukhova
доцент
-
Elena Sukharkova
Lecturer
-
Make your next move.
Prepare your application
Review drafts before you send them.