Mehrdad Rabani

Associate Professor

OsloMet – Oslo Metropolitan University
Country flagNorway

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (13)

Year:

2026

Year:

2026

Year:

2026

Year:

2026

Year:

2026

Year:

2025

The widespread use of journal bearings in rotating machinery has intensified the need to optimize their operational performance. A key determinant of bearing efficiency lies in the lubricant film thickness between the rotor and bearing surface. Recent studies demonstrate that strategically engineered surface textures can effectively modulate film thickness and enhance both static and dynamic characteristics of bearing. This investigation specifically examines how cubic, cylindrical, and semi-ellipsoidal texture geometries at varying depths influence the performance of noncircular two-lobe bearings. Through finite element analysis, the study evaluates critical performance parameters including load capacity, rotor attitude angle, critical mass threshold, and whirl frequency ratio to establish texture–depth relationships with system stability and operational efficiency. The analysis reveals that texturing the maximum pressure zone in lobe 2 significantly enhances bearing performance, with semi-ellipsoidal, cylindrical and cubic geometries, respectively. Also, the results demonstrate that texture geometry and depth significantly influence two-lobe bearing performance. Optimal enhancements in load capacity, whirl frequency reduction, and critical rotor mass occur at texture depths below the bearings clearance space width, with performance peaking before gradually declining as depth increases further. Notably, texture application in low-pressure or cavitation regions generally yields diminished or even counterproductive effects. The findings demonstrate that cubic textures provide optimal bearing performance across all depth ranges, with cylindrical and semi-ellipsoidal geometries ranking second and third, respectively, in comparative analysis.

Year:

2025

The present study investigates experimental cooling from the ceiling using phase change materials (PCMs) in Yazd, a city characterized by a hot and dry climate. A one-fourth scale model of a real room, measuring 4 m × 3 m × 3 m, was employed for the analysis. To evaluate system performance and the impact of PCM on energy consumption reduction, three configurations were considered: a simple PCM system, a PCM system with a fan (PCM-F), and a PCM system with a mini cooler (PCM-C). Additionally, to assess the influence of window configurations on ventilation, temperature, and comfort conditions within the model, three scenarios were examined: two open windows, one open window, and no windows. The economic analysis compared the two systems with the fan and mini cooler against a full mechanical cooling system without PCMs. Furthermore, CO2 emissions and environmental impacts associated with the systems were also evaluated. The results indicate that the presence of PCMs in the ceiling, due to heat absorption during phase change, leads to a temperature reduction of 5 to 10 °C in the ceiling and a 3.2 °C reduction in the average room temperature compared to the scenario without PCMs. The findings demonstrate that ceiling cooling with PCMs significantly contributes to energy consumption reduction during peak hours of cooling demand. Specifically, the PCM-F system results in a 92% reduction, and the PCM-C system leads to a 71% reduction in total cost compared to the reference mechanical cooling system. Additionally, the PCM-F system achieves approximately a 36% reduction, and the PCM-C system results in a 34% reduction in environmental impact relative to the reference full mechanical cooling system.

Year:

2025

Year:

2021

Year:

2021

Year:

2021

Year:

2020

Year:

2020

Collaborators (5)

Simon Pommerencke Melgaard

Assistant professor

Aalborg University

DENMARK
View details

Habtamu Bayera Madessa

OsloMet – Oslo Metropolitan University

NORWAY
View details

Chen Zhang

Associate Professor

Aalborg University

DENMARK
View details

Arnkell Jonas Petersen

Associate professor of building physics

Norwegian University of Life Sciences

NORWAY
View details

Per Kvols Heiselberg

Aalborg University

DENMARK
View details