Michał Pająk

Country flagPoland

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (13)

Year:

2026

Year:

2026

Year:

2025

One of the most important elements of the reliability structure of a motor vessel is its power subsystem, with the most crucial component being the engine. An engine failure excludes the ship from operation or significantly limits its operation. Therefore, accurate fault diagnosis should be a crucial issue for modern maintenance strategies. In mechanical engineering, the vibration and acoustic signals recorded during the operation of the device are the most meaningful data used to identify the reliability state. In this paper, a novel system-oriented method of reliability state identification is proposed. The method consists of the analysis of the vibration and noise signals collected on each of the engine cylinders using supervised machine learning. The main novelty of this method is data augmentation application and SVM classifier implementation. Due to these aspects, the method becomes robust in the case of poor-quality data or a limited and incomplete learning dataset. The quality of the proposed identification method was evaluated by addressing a new industrial issue (Sulzer 6AL20/24 marine engine reliability state identification). During the tests, the efficiency of the method was analyzed in the case of a complete learning data set (all types of inability states were presented in the learning data set) and an incomplete learning data set (in the testing data set, there were new types of inability states). As a result, in both cases, a very high (100%) identification accuracy of the reliability state and the type of inability state was obtained. This is a significant increase in accuracy (4.6% for the complete and 22% for the incomplete learning data set) in comparison to the efficiency of the same method without the use of machine learning and data science.

Year:

2023

The most common fuel used for powering compression ignition engines is diesel, whose main components are petroleum products. The constantly growing energy demand involves the implementation of new technical solutions and applying alternative fuels, including renewable ones, such as rapeseed oil, sunflower oil, peanut oil, and animal fats. The most commonly used biofuels are those obtained from chemically processed rapeseeds (transesterification) to provide them with physical–chemical properties similar to diesel fuel. The study presents the results of tests of a power unit fueled with different mixtures of diesel oil and fatty acid methyl esters. The experiment was carried out for a compression ignition engine of 81 kW power with direct fuel injection. Performance parameters of the vehicle power unit and its computer software were modified for the needs of the tests. Those modifications involved increasing the fuel dose and the fuel injection pressure. The test results were statistically analyzed. Based on the results, a simulation of power and torque was performed, depending on the vehicle computer system adjustment and the fuel mixture used. A simulation of the vehicle movement in a non-homogeneous environment (variable road conditions) was performed concerning the vehicle motion kinematics. The simulations were carried out in a V-SIM 5.0 program. The simulation was performed at five speeds, respectively: 0 km/h, 25 km/h, 50 km/h, 75 km/h, and 100 km/h. The simulation made it possible to determine speed, acceleration, time, and distance. The analysis shows that the highest acceleration of 3 m/s2 was obtained for the BIO50 mixture, regulation V. The longest road section needed to achieve the maximum speed (100 km/h) was recorded for the BIO10 mixture, regulation II. The simulation duration ranged from 17.9 s to 17.74 s, depending on the adopted variant.

Year:

2023

Year:

2022

Year:

2022

Year:

2022

Year:

2021

Year:

2021

Year:

2021

Year:

2021

Year:

2021

Collaborators (2)

Marcin Kluczyk

Asistant

Polish Naval Academy

POLAND
View details

Davor Kolar

-

CROATIA
View details