Michail Brykov
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (12)
Year:
2026
Year:
2026
Year:
2025
Year:
2025
Structural rolled steels are the primary products of modern ferrous metallurgy. Consequently, enhancing the mechanical properties of rolled steel using energy-saving processing routes without furnace heating for additional heat treatment is advisable. This study compared the effect on the mechanical properties of structural steel for different processing routes, like conventional hot rolling, normalizing rolling, thermo-mechanically controlled processing (TMCP), and TMCP with accelerating cooling (AC) to 550 °C or 460 °C. The material studied was a 20 mm-thick sheet of S355N grade (EN 10025) made of low-carbon (V+Nb+Al)-micro-alloyed steel. The research methodology included standard mechanical testing and microstructure characterization using optical microscopy, scanning and transmission electronic microscopies, energy dispersive X-ray spectrometry, and X-ray diffraction. It was found that using different processing routes could increase the mechanical properties of the steel sheets from S355N to S550QL1 grade without additional heat treatment costs. TMCP followed by AC to 550 °C ensured the best combination of strength and cold-temperature resistance due to formation of a quasi-polygonal/acicular ferrite structure with minor fractions of dispersed pearlite and martensite/austenite islands. The contribution of different structural factors to the yield tensile strength and ductile–brittle transition temperature of steel was analyzed using theoretical calculations. The calculated results complied well with the experimental data. The effectiveness of the cost-saving processing routes which may bring definite economic benefits is concluded.
Year:
2024
Year:
2021
Year:
2020
Year:
2020
Year:
2020
Year:
2020
Year:
2020
Year:
2020
Collaborators (4)
Vasily Efremenko
Head of the Department
-
Serhii Sylenko
Associate Professor
-
Isabella Gallino
Professor
Technische Universität Berlin
Іван Іванович Сілі
University of Technology, Sydney
Make your next move.
Prepare your application
Review drafts before you send them.