Michal Šajgalík

The purpose of the experimental results evaluated in this paper is to verify the viability of using a prototype drag finishing machine for the modification of machined workpieces. The workpieces used in the experiments had a cylindrical shape and were manufactured by turning. Three different workpiece materials were tested, and three workpieces for each material were machined with different cutting parameters. Multiple aspects of the drag-finishing process influence were kept track of—surface roughness, dimensional accuracy, and edge burr shape change. The parameters of the drag finishing were kept constant for all workpieces, and the development of each aforementioned observed aspect was recorded. The workpieces were periodically removed from the process and measured using a coordinate measuring machine with a touch probe, a surface roughness measuring machine, and an optical microscope. Based on the gathered data, it can be concluded that the usage of a prototype drag finishing machine designed primarily for cemented carbide tool microgeometry modification is viable for workpiece finishing as well. The parameters of the drag-finishing process need to be adjusted depending on the workpiece material and initial surface roughness. Additionally, the medium used for the drag finishing should be considered with respect to the desired output quality of the workpiece. Experimental work shows that having one multi-purpose machine for precise modification of wide range of materials and shapes can be an effective approach from the standpoint of economy and productivity when it comes to small numbers of workpieces requiring surface finishing.

Additive technologies have been widely adopted in various industries. The choice of additive technology and material directly affects the functionality of the manufactured components. The development of materials with better mechanical properties has led to a growing interest in replacing traditional metal components with those manufactured using additive technologies. The application of Onyx as a material comes into consideration, which contains short carbon fibers to increase the mechanical properties. This study aims to experimentally verify the viability of substituting metal gripping elements with nylon and composite materials. The design of the jaws was customized to meet the requirements of a three-jaw chuck of a CNC machining center. The evaluation process involved monitoring the functionality and deformation effects on the clamped PTFE polymer material. When the metal jaws were applied, significant deformation of the clamped material occurred, which varied with the clamping pressure. This deformation was evidenced by the formation of spreading cracks on the clamped material and permanent shape changes in the tested material. Conversely, nylon and composite jaws manufactured using additive technology demonstrated functionality across all tested clamping pressures, without causing permanent deformation of the clamped material, unlike the traditional metal jaws. The results of this study confirm the applicability of the Onyx material and provide practical evidence of the potential for reducing deformation caused by clamping mechanisms.