Mike Sumption
Has grant
Professor
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
About
Professor Mike Sumption is a faculty member at Ohio State University in the United States. His research focuses on superconducting materials and applications, particularly involving REBCO cables, Nb 3 Sn conductors, and MgB 2 conductors. Recent publications highlight his work in field quality modeling, stress-strain behavior analysis, and the development of advanced superconducting technologies.
Recent Grants
Grant: Close
Conductors, cables, and Magnets for High Energy Physics: Transport, Magnetization, Strain, and Modelling
Open Date: 2019-04-01
Close Date: 2022-03-31
Grant: Close
Conductors, joints, and Coils for Cryogen Free Whole Body 3 T MRI systems
Open Date: 2015-01-01
Close Date: 2018-12-31
Grant: Close
Conductors, Joints, and Coils for Cryogen Free Whole Body 3 T MRI systems (Renewal)
Open Date: 2015-01-01
Close Date: 2024-04-30
Grant: Close
A Scalable APC Approach to Increase Layer and non-Cu Critial Current in High Field in Nb3Sn Conductors
Open Date: 2014-10-01
Close Date: 2015-09-30
Grant: Close
Liquid Helium Bath Free, Conduction Cooled Nb3Sn Superconducting 7 Tesla Plus Mag
Open Date: 2014-09-19
Close Date: 2017-06-30
Articles (22)
For the accelerator magnets of the next hadron collider, reducing superconductor persistent-current magnetization is not only important for achieving the desired field quality, but also crucial for its sustainability because the magnetization loss is the major heat load to the magnet cold mass. For conventional Nb 3 Sn conductors this requires reduction of effective subelement size ( D eff ). For the restacked-rod-process (RRP ® ) conductors a physical subelement size ( D sub ) as small as 35 µ m (corresponding to a D eff close to 45 µ m) can be reached, but at a significant price in J c . Another way to reduce the magnetization is by introducing artificial pinning centers (APC) using the internal oxidation approach. APC conductors outperform conventional Nb 3 Sn wires in two aspects: 1) higher J c at high fields, and 2) much lower J c and magnetization at low fields (e.g. below 5 T). In this work we explored the fabricability of APC wires with small D sub . A 180-stack APC wire was produced and drawn to 0.7- and 0.5 mm diameters with good quality, with D sub s of 34 and 24 µ m ( D eff s of 36 and 25 µ m), respectively. For the 34 µ m- D sub wire, its non-Cu J c is higher than that of an RRP ® wire used for the High-Luminosity Large Hadron Collider (HL-LHC) project above 13 T (e.g. 36% higher at 4.2 K, 18 T), while its non-Cu magnetization at 1 T, Δ M (1 T), is only 29% of the RRP ® wire. Its non-Cu hysteresis loss for a cycle between 1 and 14 T, Q h (1–14 T), is 37% of the RRP ® wire. For the 24 µ m- D sub wire, its non-Cu J c surpasses the HL-LHC RRP ® wire above 17.5 T, while its Δ M (1 T) and Q h (1–14 T) are only 17% and 23% of the RRP ® wire, respectively. Its non-Cu Q h (±3 T) even meets the specification of the International Thermonuclear Experimental Reactor project.
Year:
2025
Year:
2024
We propose semi-analytical models to compute alternating current (AC) power loss in a stack of N high-temperature superconductor YBa2Cu3O7−x (or Y–Ba–Cu–O) tapes subjected to a time-varying magnetic field perpendicular to the tapes with zero transport current. The models take into account screening of the interior superconducting tapes of the stack from the external magnetic field. We validate the results by experiments carried out at temperature T=77.2K under an applied magnetic field with the amplitude of its induction Bext=0.57T and frequencies up to 110 Hz. As follows from our models, the AC loss per tape in stacks of N tapes decreases with N in agreement with experiments. The approach is extended to compute the AC loss for lower temperatures, larger magnetic fields strengths, and for frequencies up to several kHz. These studies are important for understanding and predicting the AC loss for contemporary motors and generators.
Year:
2024
Year:
2023
Year:
2023
Year:
2023
Year:
2023
Year:
2023
Year:
2023
Year:
2023
Year:
2022
Year:
2022
Year:
2021
Year:
2021
Year:
2021
Year:
2021
Year:
2021
Year:
2021
Year:
2020
Year:
2020
Year:
2020
Year:
2020
Make your next move.
Prepare your application
Review drafts before you send them.