Naoki Takata

Has grant

associate professor

Nagoya University

Japan

Research Interests

Explore related searches

Professors in Japan

Contact this professor

Get a free first email built on one of their papers, ready for you to edit and send yourself.

About

Naoki Takata is an associate professor at Nagoya University, Japan. His research focuses on the liquid phase sintering of aluminum powders, porous aluminum wicks, and the behavior of maraging steel fabricated by additive manufacturing. He has contributed significantly to the design of high-strength Al-Si-Mg alloys and explored the mechanical properties and corrosion behavior of these materials. His recent publications reflect a commitment to advancing material science through innovative processes and structural investigations.

Recent Grants

Grant: Close

Design and microstructure control of aluminum based superalloys based on thermodynamic calculation

Open Date: 2017-04-01

Close Date: 2020-03-31

Grant: Close

マイクロピラー圧縮試験を利用した異相界面強度の実験的測定法の確立

Open Date: 2016-04-01

Close Date: 2018-03-31

Grant: Close

Role of interface between Fe2Nb Laves phase and gamm-Fe matrix in the strength of austenitic heat resistant steels

Open Date: 2013-04-01

Close Date: 2016-03-31

Grant: Close

Deformation of novel austenitic heat resist ant steels under extre me environments for th ermal power plants

Open Date: 2010-01-01

Close Date: 2011-12-31

Grant: Close

Microstructure control of wrought TiAl Alloys with good robustness

Open Date: 2007-01-01

Close Date: 2009-12-31

Articles (16)

Year:

2025

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2022

Year:

2021

Year:

2020

Year:

2020

Year:

2020

Year:

2020

Collaborators (5)

Dasom Kim

Designated assistant professor

Nagoya University

JAPAN

View details

Ai Serizawa

Professor

Shibaura Institute of Technology

JAPAN

View details

Asuka Suzuki

Nagoya University

JAPAN

View details

Seeun Shin

Associate Professor

Sunchon National University

SOUTH KOREA

View details

Yuki Otani

Assistant Professor

University of Hyogo

JAPAN

View details

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Naoki Takata

Research Interests

Explore related searches

Contact this professor

About

Recent Grants

Articles (16)

Liquid Phase Sintering of Al Powder Using Al-X (X=Cu, Ca, Mg) Eutectic Alloy Powders: Effect of Alloy Elements and Oxide Film Thickness

Enhancing Capillary Pressure of Porous Aluminum Wicks by Controlling Bi-Porous Structure Using Different-Sized NaCl Space Holders

Austenite Reversion Behavior of Maraging Steel Additive-manufactured by Laser Powder Bed Fusion

CALPHAD-aided design of high-strength Al-Si-Mg alloys for sufficient laser powder bed fusion processability

Combustion Foaming of Porous (Al,Fe)<sub>3</sub>Ti with L1<sub>2</sub> Ordered Structure

Controlling the addition of solute Ti in Al-Mg-Zn-Cu-Ni alloy for enhanced high-temperature creep properties

Effect of Cr content on thermally activated deformation in single-crystal micropillars of Fe–Cr binary alloys

Effect of low-temperature annealing on electric resistivity and mechanical anisotropy of Al-Si binary alloy fabricated by laser-powder bed fusion

Elucidating dominant flow channel size for capillary performance of open-cell porous wicks

Four-dimensional electrochemical impedance spectroscopy: Role of microstructure on corrosion behaviour of Al-Si alloys additive-manufactured by laser powder bed fusion

Microstructural Variations in Laser Powder Bed Fused Al–15%Fe Alloy at Intermediate Temperatures

Precipitation Hardening at Elevated Temperatures above 400 °C and Subsequent Natural Age Hardening of Commercial Al–Si–Cu Alloy

Manufacturing Aluminum/Multiwalled Carbon Nanotube Composites via Laser Powder Bed Fusion

In Situ Scanning Electron Microscopy Observation of Crack Initiation and Propagation in Hydroxide Films Formed by Steam Coating on Aluminum-Alloy Sheets

Effect of Annealing on Anisotropic Tensile Properties of Al–12%Si Alloy Fabricated by Laser Powder Bed Fusion

Compressive Properties of Al-Si Alloy Lattice Structures with Three Different Unit Cells Fabricated via Laser Powder Bed Fusion

Collaborators (5)

Dasom Kim

Ai Serizawa

Asuka Suzuki

Seeun Shin

Yuki Otani

Make your next move.

Naoki Takata

Research Interests

Explore related searches

Contact this professor

About

Recent Grants

Articles (16)

Liquid Phase Sintering of Al Powder Using Al-X (X=Cu, Ca, Mg) Eutectic Alloy Powders: Effect of Alloy Elements and Oxide Film Thickness

Enhancing Capillary Pressure of Porous Aluminum Wicks by Controlling Bi-Porous Structure Using Different-Sized NaCl Space Holders

Austenite Reversion Behavior of Maraging Steel Additive-manufactured by Laser Powder Bed Fusion

CALPHAD-aided design of high-strength Al-Si-Mg alloys for sufficient laser powder bed fusion processability

Combustion Foaming of Porous (Al,Fe)<sub>3</sub>Ti with L1<sub>2</sub> Ordered Structure

Controlling the addition of solute Ti in Al-Mg-Zn-Cu-Ni alloy for enhanced high-temperature creep properties

Effect of Cr content on thermally activated deformation in single-crystal micropillars of Fe–Cr binary alloys

Effect of low-temperature annealing on electric resistivity and mechanical anisotropy of Al-Si binary alloy fabricated by laser-powder bed fusion

Elucidating dominant flow channel size for capillary performance of open-cell porous wicks

Four-dimensional electrochemical impedance spectroscopy: Role of microstructure on corrosion behaviour of Al-Si alloys additive-manufactured by laser powder bed fusion

Microstructural Variations in Laser Powder Bed Fused Al–15%Fe Alloy at Intermediate Temperatures

Precipitation Hardening at Elevated Temperatures above 400 &deg;C and Subsequent Natural Age Hardening of Commercial Al&ndash;Si&ndash;Cu Alloy

Manufacturing Aluminum/Multiwalled Carbon Nanotube Composites via Laser Powder Bed Fusion

In Situ Scanning Electron Microscopy Observation of Crack Initiation and Propagation in Hydroxide Films Formed by Steam Coating on Aluminum-Alloy Sheets

Effect of Annealing on Anisotropic Tensile Properties of Al–12%Si Alloy Fabricated by Laser Powder Bed Fusion

Compressive Properties of Al-Si Alloy Lattice Structures with Three Different Unit Cells Fabricated via Laser Powder Bed Fusion

Collaborators (5)

Dasom Kim

Ai Serizawa

Asuka Suzuki

Seeun Shin

Yuki Otani

Make your next move.

Precipitation Hardening at Elevated Temperatures above 400 °C and Subsequent Natural Age Hardening of Commercial Al–Si–Cu Alloy