Pau Català

Associate Professor

Universitat Politècnica de Catalunya
Country flagSpain

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

About

Dr. Pau Català is an Assistant Professor Tenure Track at the Universitat Politècnica de Catalunya, Spain. His research focuses on energy efficiency in mechanical systems, hydrodynamic lubrication, and the application of neural networks in material processing. Recent publications include analyses of energy loss in mechanical mechanisms, innovative methodologies for assembly line balancing, and the development of algorithms for studying flow behavior in steel forming processes.

Articles (7)

Year:

2026

In the present article, the application of an artificial neural network (ANN) model whose function is the development of plastic instability maps of a medium carbon microalloyed steel during the hot forming process is studied. Secondly, we proceed to create another ANN capable of providing the recrystallized grain size in the steady state resulting from forming deformation. We start from the experimental data of a medium carbon microalloyed steel obtained by hot compression tests with strain rates that vary between 10−4 s−1 and 3 s−1 and in a range of temperatures between 900 °C and 1150 °C. These experimental data are used to train the proposed ANN and obtain flow curves. Finally, the processing maps are developed by applying the dynamic materials model (DMM), according to which the safe hot forming domains and the plastic instability domains of the studied material are delineated. The comparison between the ANN and the experimental maps is carried out. It is ascertained that the optimal regions of forging in the ANN maps coincide with those obtained in the experimental maps. In addition, a study of the influence of the microstructure on the behavior of the studied steel during hot forming is carried out.

Year:

2024

The involute profile is used almost exclusively in the manufacturing of spur gears. Nevertheless, in machinery design, the evaluation of environmental factors, such as energy efficiency, has become increasingly important when choosing between feasible solutions. As a result, the study of alternative profiles is gaining interest. The key novelty of this study is the comparative analysis of involute and cycloidal gear profiles with respect to frictional power losses in the tooth contact, as well as their impact on energy efficiency in spur gear transmissions. The coefficient of friction is approximated using two widely applied analytical lubrication models: the elastohydrodynamic and mixed elastohydrodynamic, both of which provide enough accurate values with a reasonable amount of computation burden in comparison with numerical methods. An additional contribution of this study is a sensitivity assessment of the energy efficiency of the cycloidal profile with regard to the auxiliary centrode diameters. This allows for an understanding of the geometrical constraints of this profile, specifically the maximum pressure angle—which is related to the radial loads applied to the shaft—and the tooth height—which is related to the bending moment at the tooth root—and hence, setting the appropriate ones to be equivalent to the involute profile. For the comparative analysis, equivalent profiles are selected based on similar tooth bending moments and radial loads supported by the shaft. After determining the centrode diameters of the cycloidal profile, the efficiency of both gear profiles and their sensitivity to gear size and gear ratio are compared. This study concludes that, for both profiles and friction analytical models, efficiency improves with increasing gear sizes and gear ratios, eventually converging to a constant value. Furthermore, both cycloidal and involute profiles exhibit comparable performance in terms of energy efficiency across both lubrication analytical models.

Year:

2024

Year:

2024

Year:

2024

In the present article, the application of an artificial neural network (ANN) model is studied, whose function is the development of plastic instability maps of a medium carbon microalloyed steel during the hot forging process. And, secondly, we proceed to create another neural network capable of providing the recrystallized grain size in the steady state phase resulting from the deformation by hot forging, thus creating a methodology that can be applied to different types of processes and materials. In order to achieve this objective, we start from the experimental data of a medium carbon microalloy steel, obtained by hot compression tests, for strain rates that vary between 10-4 and 3 s-1 and in a range of temperatures between 900 oC and 1150 oC. These experimental data will be used to train the neural network that is intended to be created in this work. Once trained, it will be verified if the results of the test correspond to the experimental data and the fluency curves will be obtained. Finally, the processing maps will be developed applying the Dynamic Materials Model (DMM), according to which the safe domains to forge the material and the plastic instability domains are delineated, to be avoided during the forging process. The maps obtained by means of RNA will be compared with the experimental ones and it will be possible to verify that the optimal regions of forging in the maps obtained by RNA coincide with those obtained by means of experimental data. In addition, a study of the influence of the microstructure on the behavior of steel during hot forming will be carried out, since the experimental tests are carried out at austenitizing temperature, so the microstructure is different in each test.

Year:

2024

Year:

2022

Collaborators (2)

ANAS AL OMAR

PROFESSOR

Universitat Politècnica de Catalunya

SPAIN
View details

Bruno Domenech

Associate Professor

Universitat Politècnica de Catalunya

SPAIN
View details