Peter Brida

In the paper, a novel design of a wideband power splitter for a four-element antenna array using two RF antiphase segments is proposed. Based on a detailed analysis of the power splitter circuit, an analytical model was set up in the MATLAB environment. The derived analytical model allows the development of a design of the described structure for any operating frequency and estimates the properties of the designed structure. In addition to the RF electrical part, the copper cover is also considered in this study. The copper cover serves as both a support and shielding part of the proposed structure. The electrical part consists of two sections of transmission lines. The first transmission line is symmetrical, while the second transmission line is asymmetrical. The given transmission lines can be realized using any technology (microstrip, coaxial, etc.). A prototype of the proposed wideband splitter operating at 650 MHz with a fractional bandwidth of 84.3% was designed and tested in real-world conditions to prove the concept. The board of the manufactured prototype has dimensions of 25 × 152 mm. A double-sided FR4 material with a substrate height of 1.48 mm, copper thickness of 50μm, and ϵr ≅ 4.3, with a dielectric loss tangent of 0.021 was used to manufacture the prototype. The prototype was tested and its parameters were verified in practical conditions as a part of the current radio communication system for the 5G band. Under these conditions, verification measurements of the proposed splitter with a four-element antenna array were carried out.

This paper addresses the limitations of using smartphones in innovative localization systems based on audio signal processing, particularly in the frequency range of 18–22 kHz, due to the lack of technical specifications and noise characterization. We present a comprehensive study on signal design and performance analysis for acoustic communication in air ducts, focusing on signal propagation in indoor environments considering room acoustics and signal behavior. The research aims to determine optimal parameters, including the frequency band, signal types, signal length, pause duration, and sampling frequency, for the efficient transmission and reception of acoustic signals for commercial off-the-shelf (COST) devices. Factors like inter-symbol interference (ISI) and multiple access interference (MAI) that affect signal detection accuracy are considered. The measurements help define the frequency spectrum for common devices like smartphones, speakers, and sound cards. We propose a custom signal with specific properties and reasons for their selection, setting the signal length at 50 ms and a pause time of 5 ms to minimize overlap and interference between consecutive signals. The sampling rate is fixed at 48 kHz to maintain the required resolution for distinguishing individual signals in correlation-based signal processing.