Ramzi H. Harharah

Removal of organic pollutants and metal ions from produced water by adsorption, using prepared activated carbon (AC) from sewage sludge, with chemical activations using NaOH, KOH and ZnCl2 separately and pyrolysis at different temperatures (500, 600 and 700 °C). Pure sludge and prepared ACs were analyzed using FTIR and XRD. The results showed 18% crystallinity compared to that of commercial AC, which has 44% crystallinity. The results of FTIR demonstrate that the properties of the post-treated affect the final products depending on the method used and that it contains similar functional groups to those present in the commercial AC, but at a higher peak intensity. Adsorption treatments were carried out at 25, 35 and 45 °C solution temperatures. The results showed that the removal of pollutants from produced water using prepared AC with all types of chemical activations reached 99.5%, such as commercial AC with 0.06 g dosage of adsorbent at pyrolysis temperatures of 500 and 600 °C and a solution temperature of 25 °C. The obtained results refer to the mechanism of exothermic reaction and physical adsorption. It was observed that despite the lower dosage of adsorbent of 0.01 g, a sufficient treatment of pollutants was achieved. This reveals the effectiveness of using sewage sludge as a cheap adsorbent. Also, using pure sewage sludge, the adsorption data showed a 95.2% removal of the pollutants. This result indicated that pure sludge has an efficient adsorption capacity and can be utilized as a cheap and environmentally friendly material. For the removal of manganese and cadmium metal ions from the produced water, the resultant data showed that more than 90% of manganese was adsorbed and more than 97% of cadmium was adsorbed, especially when using pure sewage sludge and prepared activated carbon with NaOH chemical activation at pyrolysis temperatures of 500 °C and 600 °C.

Fish-process wastewater industries are a significant source of environmental pollutions and biohazard to humans and other living organisms due to suspended organics, phosphorus, and nitrate that causes environmental damage. In this study, the treatment of two types of fish wastewater was examined by applying chemical and physical methods. The chemical treatments using positive polyelectrolyte with a concentration of 25 ppm reduced the turbidity of fish wastewater by 50%; conductivity was reduced by 50% and pH was reduced from 8 to 7.2. Meanwhile, using negative polyelectrolyte and mixed polymers reduced the turbidity of fish wastewater by 30%. For applying natural material as a physical adsorbent, several natural materials were examined: ocimum leaves, Boswellia sacra leaves, Al-Shakher leaves, tephrosia leaves, neem leaves, mentha leaves, jand peel, neem wood, ocimum fruit, olive fruit peel, and palm anguish for the treatment of the fish wastewater. The initial tests indicated that the best material was palm anguish. FTIR, SEM, and EDS were used for the characterization of palm anguish. The selected material was treated with 1 M of NaOH solution. Different bed heights (10, 20, and 30 cm) of Palm anguish were applied. The results showed 80% and 85% reduction in the turbidity in both types of fish wastewater, especially with a bed height of 30 cm of the fish wastewater treated with NaOH, respectively. Notably, this study distinguishes itself by utilizing polyacrylamide flocculants of varying densities and by employing palm anguish as a natural adsorbent, which can sufficiently improve the treatment of fish-processing wastewater.