Roberto Devoti

Primo Tecnologo

Istituto Nazionale di Geofisica e Vulcanologia
Country flagItaly

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (6)

Global Navigation Satellite System (GNSS) plays a fundamental role in monitoring time-dependent ground displacement. However, GNSS daily position time series can often contain significant outliers, reaching up to several centimeters. These are likely of non-tectonic origin, and, if not properly accounted for, they can significantly impact the accuracy and dependability of the estimation of key parameters for geophysical analyses, such as long-term velocities and transient deformations. Characterizing these outliers can provide information about their possible sources and help us implementing mitigation strategies. Asymmetric outliers, i.e., those characterized by a primary direction, therefore occurring on one side of the mean time series, are of particular interest since they could point to the presence of recurring or repeatable sources of error. Their key features and potential causes are, however, still not fully analyzed and understood. We analyze asymmetric outliers in thousands of GNSS time series across three regions – Central-Southern Italy, New Zealand, and the Western U.S. – using data from multiple processing centers, and we reveal some persistent features among all datasets. Tens of the analyzed sites exhibit hundreds of large outliers (10-50 mm), far exceeding typical position uncertainties (∼1-6 mm). Remarkably, the outliers are numerous in the horizontal component, and tend to occur near mountainous regions, with preferred direction roughly orthogonal to the local topography. The results consistency across different datasets and instrumental features suggest a physical origin for these outliers rather than a specific processing approach or instrumental configuration. Further analyses at local scales align with previous studies linking skewed position errors to uncorrected tropospheric delays driven by the coupling between atmospheric conditions and local terrain (e.g., trapped lee waves). However, other factors – such as multipath, snow accumulation on GNSS antennas or obstructed sky visibility – could also contribute to the observed asymmetric outliers. We explore mitigation strategies at both processing and post-processing stages, but further analyses and more sophisticated approaches, such as high-resolution tropospheric modeling, are needed to better understand the involved processes and achieve meaningful improvements.

Year:

2026

Nowadays, information obtained through Global Navigation Satellite Systems (GNSSs) is widely employed in modern geodesy. The Precise Point Positioning (PPP) approach, which leverages signals from multiple GNSS constellations (e.g., GPS, GLONASS, Galileo, and BeiDou), enables high-precision positioning—crucial for seismic monitoring and early tsunami warning systems (EEWs). Recent advances, such as increased satellite availability and additional frequency bands, have significantly improved PPP performance, particularly in terms of positioning accuracy and convergence time. This study focuses on the Rete Integrata Nazionale GNSS (RING) network, managed by the Istituto Nazionale di Geofisica e Vulcanologia (INGV), which comprises dual-frequency GNSS receivers distributed across the Italian peninsula and parts of the Mediterranean Basin. We evaluate the performance of the RING data (GPS and GNSS) acquired in a period of three weeks between 19 January 2024 and 9 February 2024 and analyzed in real time by using different PPP strategies: standard PPP and PPP with Regional Augmentation (PPP-RA). The preliminary results show that the PPP-RA approach enhances positioning accuracy and reduces convergence time, especially when comparing GPS-only datasets with those incorporating full multi-GNSS configurations. For the daily solution, in the optimal setup (i.e., full GNSS with RA), real-time solutions exhibit average accuracies of 2.05, 1.73, and 4.35 cm for the North, East, and vertical components, respectively. Sub-daily accuracies’ analysis, using 300 s sliding windows, showed even better uncertainties, exhibiting median values of 0.41, 0.32, and 0.9 cm for the North, East and vertical components, respectively. Based on the outcomes for network-wide sub-daily accuracies, 84% of the stations demonstrate average errors within 2 cm for North and East components and 3 cm for the vertical one. The analysis on the convergence time after data gaps occurred during the investigation period shows that 87% of the RING stations experienced convergence times lower than five minutes in the GNSS PPP-RA solution. These findings underscore the potential of RT-GNSS RING data for enhancing seismic monitoring and early warning systems, particularly in tectonically active regions.

Year:

2025

Identifying seismogenic faults in offshore regions presents significant challenges, particularly in achieving their precise geometry and kinematics. Geological data derived from deep-sea exploration and geophysical surveys are commonly used to characterize offshore active faults together with earthquake hypocentral locations. However, limitations may arise in the quantity and quality of geophysical available data, inhibiting the realization of accurate 3D models. Furthermore, the precise relocation of seismic events is demanding, especially in the depth domain, due to the limited azimuthal coverage and the minimum station-event distance that is well beyond the mean depth of the events. In this context, an interdisciplinary approach becomes imperative to mitigate over-interpretation and over-simplification in defining the seismogenic sources and establishing an all-encompassing rupture model.By means of an interdisciplinary (geological, seismological, and geodetic) approach, we investigate the outermost Northern Apennines fold-and-thrust belt front in the Adriatic Sea (Italy) involved in the Costa Marchigiana Pesarese seismic sequence started with the 9 November 2022 Mw 5.5 mainshock. Given the proximity of the mainshock and the subsequent seismic sequence to the urbanized coastline, where several cities are situated, characterizing the activated faults and the related estimation of ground displacement becomes crucial for seismic risk assessment and the tsunamigenic potential.We analysed the geological setting of the area by means of an accurate interpretation of numerous seismic reflection profiles and well data acquired over the past decades, which complemented the publicly available seismic data. The interpretation of this dataset, provided by oil companies, led to an accurate definition of the thrust systems highlighting both the geometry of the activated sector of the thrust front and its relation to potentially active adjacent faults. Moreover, the results show the strong influence of past paleogeography and paleomorphology on the evolution and geometry of this sector of the fold-and-thrust belt, including the buttressing effect of carbonate platforms and inherited highs.The resulting 3D model was integrated with seismological data and geodetic observations allowing us to well highlight the activated portion of the fault plane: strong motion data and continuous GNSS stations hosted by onshore (storage centers) and offshore (seabed-anchored hydrocarbon platforms) infrastructures were jointly inverted to retrieve the Mw 5.5 coseismic rupture history.

Year:

2025

The RING (Rete Integrata Nazionale GNSS) is a research infrastructure developed for accurately measuring deformations at different spatial and temporal scales in the Eurasia-Africa plate boundary region (Avallone et al., 2010). Currently, the RING network (http://ring.gm.ingv.it/) is composed of 280 real-time transmitting remote sites, 70% of which are now equipped with full-GNSS (GPS, Galileo, Glonass and Beidou) instrumentation. The data streaming, in standard RTCM v.3 format, from these sites to the acquisition centre in southern Italy (Sezione Irpinia, Grottaminarda, AV) is managed by a tuned Ntrip Caster (https://igs.bkg.bund.de/ntrip/bkgcaster).The typical magnitude of the strongest events that occurred in the last century in this region (5.5-7) should require high accuracy (2-3 cm) GPS/GNSS time series to properly observe both static and dynamic coseismic displacements and, then, to properly model the earthquake source. Furthermore, the detection of any afterslip or, in general, any transient deformation should require even better accuracy (< 2 cm). The real-time GPS/GNSS data analysis has been implemented by means of the RTPPP software developed by GFZ (Ge et al., 2012). This software allows the determination of various Precise Point Positioning products with increasing accuracy (standard PPP, PPP with ambiguity resolution [PPP-AR], and PPP with regional augmentation [PPP-RA]). We performed some preliminary investigations on different (limited in time) datasets and we compared GPS-only and full-GNSS results. In the case of GPS-only PPP-RA solutions, the accuracies estimated on 24-hour data for the whole network amount up to 1.7 cm and 6 cm for the horizontal and vertical components, respectively. In the case of full-GNSS solutions, the same approach (PPP-RA) allowed an improvement of about 22% on both horizontal and vertical components (1.3 cm and 4.6 cm). Furthermore, we compared both GPS-only and full-GNSS solutions with another method, i.e. by using a short-term accuracy analysis. Using 60-s or 120-s sliding windows, that should better simulate the time span for detecting coseismic displacements, we can achieve 0.5 cm and 1 cm for horizontal and vertical components, respectively, for GPS-only solutions, and 0.3 cm and 0.5 cm for full-GNSS ones.Finally, for a few examples of earthquakes that recently occurred in Italy, we will show comparisons between post processed high-rate solutions carried out by Gipsy-Oasis II solutions and those obtained by RTPPP simulating real-time time series. The obtained accuracies will demonstrate the reliability of the RING infrastructure real-time GNSS solutions for early warning and rapid response applications.

Year:

2025

The Roncovetro landslide is a complex active earth flow located in the Enza Valley (Emilia-Romagna Region, Italy). It carves the southern flank of Monte Staffola from its summit to the riverbed of Tassobbio stream, with a total involved volume of ~ 3×106 m3. This ~ 2.5 km landslide has a maximum width of 300 m and a 30-40 m wide channel that separates the depletion zone from the accumulation zones. Since the clay fraction is largely dominant, the landslide mainly behaves like a fluid-viscous earthflow. capable of reaching maximum velocities of up to 10 m/day. The perennial activity of the Roncovetro landslide is characterized by phases during which the detachment is limited to deep creep, sliding, and flowing, as well as major events that result in the interruption of the white road between Roncovetro and Vedriano villages.In recent years, the Roncovetro landslide has been selected as a test site for evaluating new monitoring technologies based on Ultra-Wide Band (UWB) wireless sensors. Currently, it has been designated as a study area for the "Land-slide Enhanced Monitoring Network (LEMON)" project funded by the INGV. As part of the LEMON project, a small network of UWB wireless sensors has been installed on the landslide body to monitor its movement. The technology used was previously described in Intrieri et al. (2018) and Mucchi et al. (2018). The installed network consists of five sensors, comprising one master node and four slave nodes. The master node and one slave node were placed outside the area recently affected by displacements, while three nodes were positioned inside the landslide body. The acquisition frequency was set at one acquisition every three hours, totaling eight acquisitions per day.In November 2023, the Roncovetro landslide experienced a significant displacement that once again swept away the white road. This displacement was fully recorded by the UWB network. Additionally, an Unmanned Aerial System (UAS) survey was conducted before and after the displacement to offer a comprehensive view of the movement.In this work, we first describe the technological improvements and updates made to the UWB wireless network compared to previous works. Second, we describe the November 2023 displacement of the Roncovetro landslide as recorded by the UWB network with a frequency of one acquisition every three hours. And finally, we compare the data provided by the UWB network with the changes in the landslide detected through the comparison of pre- and post-UAS-derived orthophotos.

Year:

2025

Year:

2023

Collaborators (10)

Luigi Falco

Istituto Nazionale di Geofisica e Vulcanologia

ITALY
View details

Elisa Tinti

Professore Associato

Università degli Studi di Roma La Sapienza Dipartimento di Fisica

ITALY
View details

Alessandro Fornaciai

Researcher

Istituto Nazionale di Geofisica e Vulcanologia

ITALY
View details

Elisa Trasatti

Senior Researcher

Istituto Nazionale di Geofisica e Vulcanologia

ITALY
View details

Sylvain Michel

Assistant Professor

Université Claude Bernard Lyon 1

FRANCE
View details

Mimmo Palano

Docenti di ruolo di IIa fascia

University of Palermo

ITALY
View details

Luca Nannipieri

Istituto Nazionale di Geofisica e Vulcanologia

ITALY
View details

Annamaria Vicari

Head of Section

Istituto Nazionale di Geofisica e Vulcanologia

ITALY
View details

Antonio Avallone

Senior Researcher

Istituto Nazionale di Geofisica e Vulcanologia

ITALY
View details

Pierfrancesco Burrato

Docente in convenzione Ente

Sapienza University of Rome

ITALY
View details