Ryunosuke Kido
Has grant
Associate Professor
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
About
Ryunosuke Kido is an Assistant Professor at Kyoto University in Japan. His research primarily focuses on microscale investigations of soil behavior and characteristics, including the deformation of soils and the interaction of water and air in partially saturated sands. Recent articles highlight his work on hysteresis in water retention curves and the quantification of pore volume in different soil conditions.
Recent Grants
Grant: Close
International collaboration to establish new framework of soil mechanics enhanced by granular mechanics
Open Date: 2021-10-07
Close Date: 2025-03-31
Grant: Close
Inventive concepts of 3D geo-stress sensing device using equivalent resistance of conductive particles subjected to contact pressures
Open Date: 2020-04-01
Close Date: 2023-03-31
Grant: Close
不飽和土内の液架橋分布が強度・変形特性に与える影響の解明と構成モデルの構築
Open Date: 2020-04-01
Close Date: 2023-03-31
Grant: Close
interpretation of macroscopic response of partially saturated soil by clarifying microscopic characteristics of pore fluids
Open Date: 2019-08-30
Close Date: 2021-03-31
Articles (10)
Year:
2026
The purpose of this study is to experimentally investigate the infiltration characteristics of bentonite-based stabilizing fluid at the microscale to interpret the mud film formation mechanism. An infiltration testing apparatus combined with X-ray micro-CT imaging was developed to visualize the interior of the specimen before and after infiltration. Cluster labeling was conducted on the CT images to quantify the distribution and volume of bentonite. Flow velocity distributions in soil pores were calculated using an image analysis to examine their correlation with bentonite distribution. The results showed that increasing infiltration pressure and stabilizing fluid concentration led to larger volumes of bentonite being distributed within the pores as well as the formation of a uniform mud film, ceasing permeability. Bentonite clusters with larger volume tended to develop particularly in regions with high flow velocity within pores, and this tendency was more significant as the stabilizing fluid concentration increased. Based on the findings, the mud film formation mechanism can be explained as follows. When the fluid comes into contact with the specimen, the flow velocity varies significantly from low to high, and bentonite adsorbs to the soil particle surface. The adsorbed bentonite further narrows the pore space, leading to cumulation of bentonite and development of large bentonite clusters, resulting in the mud film formation. Although the mud film formation is not sufficient, the stabilizing fluid infiltrates the interior of the specimen and the relatively large bentonite clusters are distributed in pore spaces, leading to a decrease in macroscopic permeability.
Year:
2026
In the earth drilling method, which is an example of construction of structural foundations, the ground is excavated using a stabilising solution composed mainly of bentonite, and the trench walls are stabilised by an impermeable mud film formed on the trench walls. Microscopically, the mud film is supposed to be formed when bentonite in the stabilising solution occludes the pores, but this has never been experimentally verified. To elucidate the mechanism of mud film formation, a test apparatus of stabilising solution infiltration that can be applied to X-ray micro-computed tomography was developed, and the soil particle structure before and after infiltration of the stabilising solution is visualised. An image analysis algorithm was developed to investigate spatial and volumetric distribution of bentonite inside the sand. As a result, the formation of a uniformly continuous mud film was successfully visualised in three dimensions. Furthermore, it was found that bentonite occluded many pores in the sand, and that the higher the infiltration pressure, the larger the volume of bentonite that was spatially distributed. Under low infiltration pressure, small volumes of bentonite distribute over a wider area along the infiltration direction.
Year:
2025
Year:
2025
Year:
2025
The hysteresis observed in a water retention curve was experimentally studied through the use of X-ray micro-computed tomography (μCT). The CT images were acquired during the main drying and wetting processes of a water retention test for uniform sand. The porosity and degree of saturation (Sr) of pore-scale local subsets were calculated using images segmented into soil, water and air phases. The simultaneous distribution of the local porosity and Sr was also analysed to investigate the relationship between the pore size and retained water volume. At similar suction levels, only small pore spaces retained water during wetting, while relatively large pore spaces retained water during drying, demonstrating the ink-bottle effect. At similar saturation levels, the simultaneous distribution was independent of the wetting and drying processes, indicating no significant difference in the water retention state between the two processes. Another image analysis was performed to calculate the principal curvatures of the air–water interface. At similar saturation levels, the calculated curvature of the drying process was greater than that of the wetting process, indicating contact angle hysteresis. The contact angle between the soil particles and water is different at the microscopic level, whereas the water retention states of the two processes are similar.
Year:
2024
Year:
2021
Year:
2020
Year:
2020
Year:
2020
Collaborators (2)
Yosuke Higo
Professor
Kyoto University
Yasuo Sawamura
Associate Professor
Kyoto University
Make your next move.
Prepare your application
Review drafts before you send them.