Samy El-Gamal
Professor
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (13)
Year:
2026
Year:
2026
Year:
2026
Year:
2026
Year:
2026
Year:
2026
Lead-free composite solders has attracted more attention as they are required in the microelectronics industry to assure good electrical connections and the best mechanical response between integrated circuit devices and the substrate. The mechanical mixing technique was used to prepare the plain (Sn-5.3 wt% Zn-1 wt% Ag, SZA531) and composite solder (SZA531/0.5 wt% MgO), while MgO nanoparticles were synthesized by sol-gel technique. The aim to investigate the effects of loading 0.5 wt% MgO NPs and [Formula: see text]-irradiation doses (0–2.0 MGy) on the tensile properties of plain solder at different strain rates (ε • ). The microstructural properties revealed that MgO was pure, crystalline, and had a nanoparticle-like morphology with an average crystallite size of 9.61 nm. Plain and composite solders contained β-Sn, Zn, and Ag, as well as some intermetallic compounds, Ag 3 Sn and AgZn. Loading MgO refined [Formula: see text]-Sn and Ag 3 Sn, while AgZn particles were partially dissolved. The thermal analysis reported that the melting point slightly increased from 206.1°C with SZA531 to 208.7°C when loaded which confirms the good solderability of composite solder. The tensile properties revealed that ultimate tensile strength and the tensile toughness increased with increasing ε • , dose of γ-rays, and MgO loading, while ductility decreased. The strain rate sensitivity index ( m) decrease with increasing the dose and MgO loading because of the decrease in the resistance to necking. These results were interpreted based on Orowan strengthening and dislocation strengthening.
Year:
2022
Year:
2020
Year:
2020
Year:
2020
Year:
2020
Year:
2020
Year:
2020
Collaborators (4)
Ghada Mohammed
Ain Shams University
Ahmed Ismail
Full Professor
Ain Shams University
Fatma A. Gomaa
-
Alejandro Jiménez Martín
Profesor Ayudante Doctor
Universidad de Salamanca
Make your next move.
Prepare your application
Review drafts before you send them.