Simon Guihéneuf

The use of quarry by-products can enable the commercialization of a clay building material (reconstituted earth) thanks to minimal valorized and perennial stocks of materials. This study shows that quarry by-products can be used to mix design a clay-based building material for the manufacture of CEB. These soils are composed of quarry tailing and clayey muds. Proctor and dry compressive strength tests have shown that the proportion of mud that achieves the highest possible compressive strength is a balance between increasing density through the aggregate arrangement, increasing clay activity, and decreasing density through the increase in water content. These tests resulted in the formulation of materials with compressive strengths of 5.8 MPa and 8.4 MPa at densities of 2135 kg/m3 and 2178 kg/m3. The influence of mud incorporation on the material granulometry and on its characteristics was also studied. Moreover, a model allowing us to link the compressive strength, the clay activity, and the dry density is proposed for the materials composed of quarry by-products. This model enables us to facilitate the mix design and the standardization of the earth material.