Simon Lindberg
Staff Scientist
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (5)
Year:
2025
Quasi-solid polymer electrolytes (QSPEs) are considered a promising alternative to liquid electrolytes for high-voltage lithium metal batteries. Herein, we present their properties and performance supported on polyolefin microporous separators. These QSPEs consist of a poly(vinylidene-fluoride-co-hexafluoropropylene) polymer matrix, ethylene carbonate as a plasticizer, and various lithium salt mixtures, including lithium bis(fluorosulfonyl)imide (LiFSI), lithium bis(oxalate)borate (LiBOB), and LiNO3 as a solid electrolyte interface-forming additive. They exhibit an ionic conductivity of ca. 1 mS cm-1 at room temperature and excellent resistance against lithium dendrites, attributed to the presence of the tough polyolefin separator. The effect of the lithium salt mixture composition on lithium plating/stripping performance and electrooxidation stability was studied in detail, showing that LiNO3, while having a clear positive effect on the plating/stripping performance, may also adversely affect the oxidative stability of the electrolyte, accelerating the degradation of the cathode/electrolyte interface. QSPEs with binary LiFSI/LiBOB salt mixtures were tested at room temperature in a LiNi0.8Mn0.1Co0.1O2||Li monolayer pouch cell with a cathode area capacity of ca. 2.5 mAh cm-2. This cell delivered an initial capacity close to 200 mAh g-1 at C/20, 150 mAh g-1 at C/1, and 80% capacity retention after 100 cycles at 25 °C. The results demonstrate the viability of supported QSPEs, based on poly(vinylidene-fluoride-co-hexafluoropropylene), ethylene carbonate, LiFSI and LiBOB, for application in high-voltage quasi solid-state lithium metal batteries.
Year:
2025
Year:
2024
Solid polymer electrolytes offer a safer alternative to organic liquid electrolytes in high‐voltage lithium metal batteries, yet challenges remain in achieving adequate cyclability, energy density, scalability, and safety. This study presents the cycling performance of 1 Ah high‐voltage lithium polymer batteries featuring a hybrid ceramic polymer electrolyte (HCPE), a lithium metal anode, and a LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC‐811)‐based positive electrode. The HCPE stands out for its remarkable mechanical properties, with a Young's modulus exceeding 200 MPa at room temperature, providing robust resistance against dendrite formation. The Li||Li symmetric cells exhibited outstanding performance, cycling for over 1000 hours at a capacity of 2 mAh cm −2 , highlighting the exceptional attributes of HCPE. Full cell testing is conducted under practical conditions, utilizing various cell configurations, from coin cells to large pouch cells with a 1 Ah capacity, achieving an energy density of nearly 250 Wh kg −1 and promising cyclability with 80% capacity retention after 110 cycles. The study also investigated thermal runaway characteristics, showing comparability with commercial lithium‐ion batteries. This research underscores the scalability and performance of high‐voltage lithium metal polymer batteries, advancing their potential for commercial viability.
Year:
2024
Year:
2023
Collaborators (3)
Masashi Ishikawa
Professor
Kansai University
Elzbieta Frackowiak
Poznan University of Technology
Rémi Vincent
Université Grenoble Alpes
Make your next move.
Prepare your application
Review drafts before you send them.