Stéphane Moreau

This paper presents a detailed aeroacoustic investigation of a controlled-diffusion airfoil at near-stall condition. The study aims at answering two research questions: identify the flow mechanism responsible for separation noise for an airfoil near-stall conditions and whether the noise is generated by a dipole for airfoil close to stall and can be quantified by Amiet's diffraction theory. The study uses synchronized particle image velocimetry, remote microphone probes, and far-field microphone measurements to perform experiments at two chord-based Reynolds numbers of about 150 000 and 250 000. The results show that when the airfoil is placed at a higher angle of attack, such as 15°, strong amplification of flow disturbance is seen, resulting in the rolling up of the shear layer in the aft region of the airfoil, forming large coherent structures. While these rollers play a central role in the increase in noise due to flow separation, the flapping of shear layer does not contribute to the separation noise. The present study conclusively shows that separation noise is dipolar in nature and that the quadrupolar contribution for low-speed airfoils at near-stall conditions can be neglected. However, the increase in flow disturbances measured close to the trailing edge of the airfoil implies that the assumption of small-amplitude disturbance is no longer valid, which is the central premise of the thin linearized airfoil theory. Outside the frequency range at which flow separation operates, Amiet's theory is able to predict the far-field noise even at high angles of attack.