Xavier Velay

Head of Department / Professor in Manufacturing

Atlantic Technological University
Country flagIreland

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (6)

Year:

2025

This study focuses on evaluating the fatigue life performance of 3D-printed polymer composites produced through the fused deposition modelling (FDM) technique. Fatigue life assessment is essential in designing components for industries like aerospace, medical, and automotive, as it provides an estimate of the component’s safe service life during operation. While there is a lack of detailed research on the fatigue behaviour of 3D-printed polymer composites, this paper aims to fill that gap. Fatigue tests were conducted on the 3D-printed polymer composites under various loading conditions, and static (tensile) tests were performed to determine their ultimate tensile strength. The fatigue testing load ranged from 80% to 98% of the total static load. The results showed that the fatigue life of the pressed samples using a platen press was significantly better than that of the non-pressed samples. Samples subjected to fatigue testing at 80% of the ultimate tensile strength (UTS) did not experience failure even after 1 million cycles, while samples tested at 90% of UTS failed after 50,000 cycles, with the failure being characterized as splitting and clamp area failure. This study also included a lap shear analysis of the 3D-printed samples, comparing those that were bonded using a two-part Araldite glue to those that were fabricated as a single piece using the Markforged Mark Two 3D printer. In summary, this study sheds light on the fatigue life performance of 3D-printed polymer composites fabricated using the FDM technique. The results suggest that the use of post-printing platen press improved the fatigue life of 3D-printed samples, and that single printed samples have better strength of about 265 MPa than adhesively bonded samples in which the strength was 56 MPa.

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Year:

2024

Collaborators (5)

Jawad Ullah

Lecturer in Mechanical

University of Ulster

UNITED KINGDOM
View details

FAISAL MANZOOR

Lecturer

University of Ulster

UNITED KINGDOM
View details

Waqas Saleem

Lecturer

Technological University Dublin

IRELAND
View details

Edward Archer

Sr Lecturer

University of Ulster

UNITED KINGDOM
View details

Babak Ziaie

Assistant Lecturer

Atlantic Technological University

IRELAND
View details