Zsolt Cimer

Major accidents involving flammable substances can lead to significant environmental damage. The operators of chemical warehouses—in order to prevent and mitigate harmful environmental impacts—based on fire prevention strategies should apply “firewater pollution prevention” (FPP) measures. The identification of affected warehouses already in operation is an important law enforcement task. Therefore, the authors—based on the assessment of firewater run-off scenarios—propose a simple and easy-to-use dangerous establishment identification procedure and methodology based on event tree analysis and indexing preliminary risk analysis approaches. Two independent expert groups validated—in the case of 10 facilities—the index components of the approach. The testing of the applicability of the approach took place in parallel with the analyses of the Hungarian operator’s practice. The research results—covering the inspection of 24 facilities—can assist the operators in the effective and unified implementation of FPP measures. In the case of 14 facilities, it was necessary to introduce FPP measures, which highlight the need to improve the law enforcement compliance of identified operators. The investigation results can also contribute to increases in the fire and environmental safety performance of chemical warehouses, which ensures a higher level of environmental protection and people’s health near chemical warehouses.

The recent expansion of logistics capacities entails the installation of chemical warehouses, which operations increase the occurrence of compartment fires involving flammable dangerous substances. The aim of this research was to compare and analyze the fire behavior of beams made of different structural materials but with the same load capacity. It is assumed that wooden beams, which are less commonly used in industrial facilities, may have a similar or even better load-bearing capacity in case of a fire than the generally used steel beams. The authors—based on the relevant EU standards—performed load capacity calculations of three beams prepared from different materials under the influence of fire and analyzed the changes in the material properties. Then, they examined the possibility of reinforcing the beams with carbon fiber lamellae and proposed additional fire protection requirements. The test results not only proved the different degrees of fire resistance of various building materials in the event of a fire and after their reinforcement but also suggested the application of special technical, prevention and response measures for the safe storage of dangerous substances. The study outputs enable warehouse designers, operators and safety experts to ensure a higher fire safety level for chemical warehouses.