Zuzana Vidholdová
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (11)
Year:
2026
Year:
2026
Year:
2026
Year:
2026
Year:
2025
Year:
2025
Year:
2025
Year:
2024
The protection and decorative value of raw wood-based boards with various coatings can be enhanced during the service life of furniture using surface treatment techniques. In this study, selected transparent, pigmented polyurethane email finish and thin foils, commonly used in furniture, were used for surface treatments of medium-density fibreboards with a thickness of 18 mm. Water-borne finish with polyurethane–acrylate resin, solvent-borne finish with polyacrylate resin, and finish based on native oil and waxes, as well as pigmented polyurethane email finish, were used on veneered medium-density fibreboards. The thin foils (polyvinyl chloride, polyethylene terephthalate, and lacquered acryl film) were used for raw medium-density fibreboards. Several resistance surface properties were investigated. It was found that the hardness and resistance to impact were very much related to the interactions between the coating film or thin foil and the substrate. The type of surface finish had a substantial impact on the coating and foil’s resistance qualities, such as resistance to mould and cold liquids.
Year:
2023
The colour difference of transparent surface finish on hydrothermally treated beech wood in the interior. The paper deals with the influence of ageing of transparent surface finish in the dark and in the light in interior conditions. The colour difference of the tested samples with surface finishes (∆E*ab) was measured after the ageing of native wood and hydrothermally modified wood in the dark and in the light. In the experiment,European beech wood was hydrothermally treated at a temperature of 135 C under saturated water vapour for 6 hours. Three different types of surface finishes (acrylic-polyurethane, polyacrylic and aldehyde resin, alkyd resin) were applied on the wood surfaces. The colour parameters of the surfaces in the system CIE L*a*b*, chroma ΔC*,and hue angle Δh were measured immediately after surface finishing and after the ageing in the dark and in the light. The samples were placed behind windows glass in the interior for 60 days. The results of the colour difference ∆E*ab showed that the colour of wood and the colour of the surface finishes was changed after ageing in the dark as well as in the light. The colour difference ∆E*ab was bigger in the light than in the dark. The colour difference was bigger on native wood than on hydrothermally modified wood.
Year:
2023
Year:
2023
Collaborators (4)
Ján Iždinský
-
Tatiana Vilkovská
technical university in zvolen
Maria Smidriakova
-
Jozef Fekiač
assistant professor
technical university in zvolen
Make your next move.
Prepare your application
Review drafts before you send them.