CHIARA COLOMBERO
Assistant Professor
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
About
Chiara Colombero is an Assistant Professor at Politecnico di Torino, Italy. Her research areas focus on geomatics and geophysical techniques, with recent publications addressing the monitoring of underground caves, as well as seismic noise and microseismicity. She has also contributed to the design and testing of FBG accelerometers and is involved in a special issue on remote sensing in applied geophysics.
Articles (11)
Year:
2026
Velocity models of the shallow subsurface (a few hundred meters) are important in near-surface characterization, improving seismic mapping resolution at depth, and constraining deeper geological models. It is therefore interesting to retrieve them from deep seismic exploration data. We compute the near-surface shear wave velocity model in the vicinity of South Deep Gold Mine, using surface waves present in the small-offset 2D and 3D seismic reflection data acquired between 2022 and 2023 at the mine for research, mine planning, and development purposes. The obtained near-surface model is then used to (1) characterize the near-surface, and (2) better constrain the interpretation of possible water preferential flow-pathways (faults, fracture zones, and dykes) mapped at mining levels, that enable the migration of water from overlying aquifer systems (< 0.5 km depth) to the mining levels (∼ 3 km depth). The analysis is carried-out on reflection seismic data acquired for deep mineral exploration, where the acquisition parameters were not optimized for surface wave techniques and the reciprocity principle is used to improve the data density, coverage, and near-surface mapping resolution. The lithostructural information retrieved from the produced pseudo-2D and 3D shear wave velocity models is consistent with information obtained from available surface borehole data and published records in the study area. To investigate the structural linkage between the deep mining levels and shallow groundwater aquifers, we integrated the near-surface shear wave velocity model produced from the small-offset 2D and 3D reflection seismic data with the large-offset 2003 3D reflection seismic data, and geological structures derived from underground mapping, and exploration drilling. The shear wave velocity models help define the faults, fractures, and dykes that compartmentalize the near-surface groundwater aquifer systems. The large-offset legacy 2003 3D seismic data, underground mapping, and exploration drilling provide a better definition of the orebody and its offsets (e.g., faults) at the mining level. The integrated data show that several geological structures (e.g., faults and dykes), defined by legacy seismic data, underground drilling, and mapping, cross-cut the mining levels at ∼ 3 km depth and intersect the near-surface aquifers, thus making these structures possible preferential flow-pathways for water migration to the deep mining levels. The results of the interpretation illustrate the advantages of integrating shallow and deep subsurface information to constrain the timing of geological events and mitigate the risks associated with water ingress to the mining levels. The final model produced can be used for future mine development, improving safety and production, and for the extension of the Life of Mine (LoM).
Year:
2026
Year:
2025
The FUTURE project aims to enhance seismic surveying in South African mining by integrating advanced acquisition technologies. In this paper, we detail surface and underground seismic surveys at the South Deep gold mine as part of the project. Surface seismic acquisition used co-located broadband micro-electromechanical sensors, one and three component recorders connected to geophones, distributed acoustic sensing using a straight fibre optic cable, along with a 6 ton broadband seismic vibrator operating with 4-180 Hz linear sweeps. In addition, underground surveys employed a combination of straight, and helically wound fibre optic cables, cabled-based and nodal sensors, along with a 500 kg drophammer mounted on a skid steer bobcat. The surface and underground seismic arrays were time synchronised using a GPS-time transmitter to allow for accurate seismic data recording in a GPS-denied environment. Results show the efficacy of these techniques in acquiring high-resolution seismic data, revealing detailed subsurface geological structures and mineralisation down to 3500 m below ground surface. Surface data revealed clear seismic reflections corresponding to the Black Reef and Ventersdorp Contact Reef. An underground P-wave velocity model exhibits low velocity anomalies that are associated with fracturing, while a P-wave reflection stack section shows significant reflections and a degree of faulting below the tunnel floor that was not observed on the surface reflection seismic data. We highlight the potential of these technologies to enhance safety, efficiency, and sustainability in mining. This study sets a benchmark for future reflection seismic surveys, paving the way for safer, more efficient, deep mineral exploration and extraction practices.
Year:
2025
Ambient seismic noise and microseismicity analyses are increasingly applied for the monitoring of landslides and natural hazards. These methodologies can offer a valuable monitoring tool also for glacial and periglacial bodies, to understand the internal processes driven by external modifications in air temperature and rainfall/snowfall regimes and to forecast possible melting‐related hazards in the light of climate change adaptation. We applied the methods to an almost continuous year of data recorded by a network of four passive seismic stations deployed in the frontal portion of the Gran Sometta rock glacier (Aosta Valley, NW Italian Alps). The spectral analysis of ambient seismic noise revealed frequency peaks related to stratigraphic resonances inside the rock glacier. Although the resonance frequency related to the bedrock interface was constant over time, a second higher resonance frequency was identified as the effect of variations in the active layer thickness driven by external air temperature modifications at the daily and seasonal scales. Ambient seismic noise cross‐correlation highlighted coherent shear wave velocity modifications inside the periglacial body. The microseismicity dataset extracted from the continuous ambient noise recordings was analyzed and clustered to further investigate the ongoing internal processes and gain insight into their source mechanism and location. The first cluster of events was found to be likely related to the basal movements of the rock glacier and to falls and slides of the debris material. The second cluster was possibly related to shallow ice and rock fracturing processes. The validation of the seismic results through simple models of the rock glacier physical and mechanical layering, the internal thermal regime and the surface displacements allowed for a comprehensive understanding of the rock glacier's reaction to the external conditions.
Year:
2025
The ongoing global temperature increase has accelerated the mass loss of glaciers worldwide, with Italian alpine glaciers being particularly vulnerable due to their small size, complex geometries and exposition that implies a fast reaction to thermal and hydrological modifications. In such a frame, the Indren Glacier (Aosta Valley, north‐western Italian Alps) provides a valid test site to check the thickness evolution over the last two decades (1999–2020), through an integrated approach combining historical data, on‐site geophysical measurements, remote sensing surveys, modelling and temperature analysis. Using a 2018 helicopter‐based photogrammetric survey and Ground Penetrating Radar (GPR) survey campaigns of 2020, we obtained new input data and constraints to build up an updated thickness model for the whole glacier through the Glacier Thickness Estimation algorithm (GlaTE). Ice thickness is indeed a key parameter to estimate the ice volume and use it as further input in evolutionary models forecasting future scenarios. As a part of this integrated approach, we also analysed remote sensing and temperature data, finding a major modification in the glacier conditions over the last decade. Further comparing these results with previous studies, we identified a significant decrease in ice thickness, and we confirmed the presence of an over‐deepening in the glacier central widest part. This integrated methodology enhances our understanding of glacier dynamics and improves predictions of future changes, offering crucial insights for managing water resources and mitigating natural hazards in the alpine region.
Year:
2025
Velocity models of the shallow (a few hundreds of meters) geology are hardly retrieved from deep seismic reflection exploration data, despite their importance in near-surface characterization, improving seismic mapping resolution at depth, and constraining deeper geological models. In this work, we compute the near-surface shear wave velocity model in the vicinity of South Deep Gold Mine, using surface waves present in the 2D and 3D deep seismic reflection data acquired at the mine. The obtained near-surface model is then used to (1) characterize the near-surface and (2) better constrain possible water conduits (faults, fracture zones and dykes) mapped at mining levels, that enable the migration of water from overlying formations to the mining levels, and (3) constrain the timing of faults and dykes activity in the vicinity of the mine. The analysis is carried-out on reflection seismic data acquired for deep mineral exploration, where the acquisition parameters were not optimized for surface wave techniques, thus the reciprocity principle is used to improve the data density, coverage, and near-surface mapping resolution. The lithostructural information retrieved from the produced pseudo-2D and -3D shear wave velocity models are consistent with information obtained from available borehole data and published records in the study area. Integrating the produced near-surface shear wave velocity model with a legacy 2003 P-wave seismic reflection cube, mine mapping and drilling information enabled the investigation of the structural linkage between the near-surface groundwater aquifers and deep mining levels (~ 3 km depth). The faults and dykes mapped at the mining level intersect and cross the near-surface aquifers, thus making these structures possible conduits for water migration to the deep mining levels. The findings of this research illustrate the advantages of integrating shallow and deep subsurface information to constrain the timing of geological structures and mitigate the risks associated with water ingress to the mining levels. The final model produced can be used for future mine development, improving safety and production, and for extending the Life of Mine (LoM).
Year:
2025
Year:
2023
Year:
2023
Year:
2021
Year:
2020
Collaborators (5)
Michele Freppaz
Prof
Università degli Studi di Torino
LAURA VALENTINA SOCCO
Full Professor
Delft University of Technology
Alireza MALEHMIR
Professor in applied geophysics
Uppsala University
Eleonora Bonifacio
Professor of Pedology
Università degli Studi di Torino
Raymond Durrheim
Research Chair
University of Witwatersrand
Make your next move.
Prepare your application
Review drafts before you send them.