Alireza MALEHMIR
Professor in applied geophysics
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (30)
Surface fibre-optic distributed acoustic sensing (S-DAS) typically requires trenching to achieve adequate coupling, which can be challenging and costly in hardrock environments. As an alternative, untrenched S-DAS offers significant time and cost savings, though at the expense of data quality. In this study, we systematically evaluated the impact of untrenched deployment on DAS data quality through a multi-method comparison with conventional sensors, including three-component geophones and vertical-component accelerometers. All recorded data were converted to particle velocity to enable direct amplitude comparisons across arrays. Phase fidelity was assessed using the surface-wave method, cross-power spectral analysis, and ambient noise interferometry. Untrenched S-DAS recorded amplitude levels that differed from those of conventional sensors, particularly above 50 Hz. However, within the surface-wave band (up to 35 Hz), the data quality was sufficient to derive reliable shear-wave velocity profiles, especially when the data were resorted to common-receiver gathers. Sensitivity and coherence decreased significantly at higher frequencies and larger offsets, and a systematic time delay was observed for DAS in the surface-wave band. Ambient noise interferometry was ineffective for the untrenched DAS array, largely due to variable channel coupling and system-specific noise. This study provides a systematic field comparison of untrenched S-DAS and conventional sensors in hardrock settings, outlining both the limitations and the practical potential of this cost-effective deployment method.
Year:
2026
High‐resolution seismic data are essential for interpreting thin‐layered stratigraphy and subtle structures within hardrock media, as this information can lead to better exploration decisions in the mining sector. Conventional resolution enhancement techniques, such as spectral broadening and supervised deep‐learning techniques, often rely on oversimplified assumptions or require high‐resolution training labels. These limitations restrict their applicability in real seismic data processing, especially for hardrock seismic data, which are typically characterized by high velocities, strong heterogeneity and short reflector continuity due to complex emplacement contacts and geological settings. We propose an unsupervised seismic resolution enhancement framework that integrates physics‐guided and attention‐based mechanisms. The framework is designed to address the progressive loss of high‐frequency information in seismic exploration and the limitations of conventional resolution enhancement methods, which struggle to balance imaging fidelity with geological interpretability. The proposed network incorporates coordinate attention blocks and the lightweight Vision Transformer, enabling more effective capture of spatial dependencies and long‐range significant features in complex geological settings. Specifically, our approach utilizes a physics‐constrained deconvolutional loss function, where the predicted reflectivity is regularized by an adaptive sparsity prior and convolved with a wavelet to synthesize seismic traces that are consistent with the observed data. In addition, a robust Charbonnier penalty ensures stable physical fitting, while anisotropic total variation regularization improves lateral continuity. Following this design, the model achieves end‐to‐end recovery of high‐resolution seismic information without requiring high‐resolution labels, thereby explicitly embedding physical constraints into the learning process. Testing results on synthetic and field datasets from two different regions demonstrate that the proposed method significantly enhances vertical resolution, reflector sharpness and lateral continuity, enabling more precise delineation of subtle stratigraphic features within the target intervals. Compared with spectral enhancement and conventional deep‐learning methods, our approach achieves higher seismic reconstruction fidelity and more interpretable reflectivity, providing an option that combines robustness with interpretability for high‐resolution imaging in complex geological conditions.
Year:
2026
Year:
2026
In hardrock or crystalline rock geological settings, due to low impedance contrast, reflected energy is usually weak. In addition, often stronger surface waves and noncoherent noise are observed including high‐frequency scattering noise, which seriously covers the useful reflection signal. Therefore, imaging of hardrock seismic data with a low signal‐to‐noise ratio (S/N) is challenging and requires tailored and cumbersome processing workflows. In this study, we propose an unsupervised learning‐based framework with frequency‐guided constraints for pre‐stack seismic data denoising. The proposed label‐free framework contains two input channels, noisy and time‐frequency‐domain data conditioned through a continuous wavelet transform (CWT) filter. The CWT filtered data provide richer feature representations guiding better the reconstruction of seismic signals. The proposed framework consists of several feature attention blocks with the soft attention mechanism to extract the spatial relationship between noisy and CWT filtered data and assign higher weights to significant features. To improve the denoising performance, we designed a hybrid loss function containing the log‐cosh function, amplitude‐weighted constraint, and frequency‐dynamic weighted constraint. We use one synthetic and two real pre‐stack seismic data sets from two mineral‐endowed regions in Sweden and Canada to test the effectiveness of the proposed network. Compared with the three benchmarks, our proposed framework shows stronger reflection signal recovery and is capable of better attenuating the complex noise. The proposed denoising workflow allows improved delineation of near‐surface structures and the mineral deposits targeted in one of the data sets.
Year:
2025
Accurate near-surface characterization is essential to ensure public safety and operational integrity in geological carbon storage (GCS) projects. This study focuses on the imaging of near-surface features within the Havnsø domal structure, a potential GCS site in northern-central Denmark, using seismic data acquired in 2022. We combined high-resolution seismic reflection imaging with first-break travel-time tomography to characterize features and key horizons within Quaternary sediments and the Chalk Group. We achieved more accurate and detailed near-surface sections down to 500 m by migrating and time-to-depth-converting seismic sections using the tomographic velocities. This approach, along with superimposed tomography-based models, revealed important features such as buried valleys, Chalk Group horizons and fault zones. Our results demonstrate that the potential GCS prospect area is suitable for long-term CO 2 storage, supported by the lack of major faults in situ and in the vicinity of buried valleys.
Year:
2025
Advancements in technologies and acquisition techniques in reflection seismology have increased the quantity of data that can be recorded in a single survey. The spreading of three‐component (3C) recorders has resulted in multicomponent data acquisitions to be more cost‐effective than single‐component (1C) acquisitions, making 3C datasets more common. Therefore, the need for processing workflows aiming to enhance S‐wave from P‐wave‐designed acquisitions is increasing. As part of a larger survey for geological carbon storage site investigations, a 1‐km‐long seismic profile was acquired near the city of Randers in Denmark and is considered in this study. The acquisition setup consisted of two vertical vibrating sources, operating every 10 m, recorded simultaneously from a 1C nodal array, 10 m spaced and a landstreamer system, equipped with 60 3C micro‐electro‐mechanical sensors in 2 m intervals. Analysis of the 3C data recorded from the landstreamer system shows PP‐, PS‐ and SS‐wavefield reflections from a shallow horizon nearly 50 m below the ground surface. Although the PP‐wavefield data processing was straightforward, the SS‐wavefield imaging was challenged by strong surface waves recorded in the data, thus requiring a tailored workflow for its processing. The workflow employs a reflection‐picked moveout correction specifically designed on the observed reflections with respect to the data acquisition geometry. Results demonstrate that this tailored method is effective, yielding improved continuity of the SS‐wavefield reflectivity with respect to the traditional normal moveout corrections. P‐ and S‐wave interval velocity models are estimated in depth, and their ratio is computed to complement the geological interpretations of the shallow subsurface. Similar imaging scenarios can benefit from the proposed method to sharpen SS‐wavefield reflections in stacked section.
Year:
2025
Understanding the structural intricacies of subsurface halokinetic formations is crucial for various geological applications, including geological capture and storage (geological carbon storage (GCS)). This study focuses on the seismic imaging of the Gassum structure in eastern Jutland, Denmark, employing high‐resolution, dual‐element acquisition, and processing techniques. The investigation aims to unravel details in the evolution of the salt dome and its implications for GCS potential. High‐resolution seismic data processing and interpretation reveals a skewed dome structure with steeper flanks on the western and northern sides, characterized by faults and stratigraphic thinning. The asymmetric growth of the dome suggests uneven salt loading during its genesis, influencing local stress fields and structural development, with evidence of syn‐tectonic subsidence that produced salt welds. This is supported by the presence of stratigraphic wedges and an increased depth of imaged horizons within steeper flanks of the dome. A mild piercement of the salt into overlying sediments, onlapping features, and the presence of normal faults that originate from the dome apex and extend radially, all indicate a reactive piercement process in the salt pillow's development stage. This produced an extensional regime in overlying strata, inducing sequence thinning and graben structures. Analysis of reservoir and seal properties unveils adequate conditions for GCS, with a continuous reservoir and thick primary and secondary seals. However, the presence of faults intersecting these formations raises concerns regarding long‐term storage stability. Further investigations into reservoir porosity, migration paths, and volumetric analysis are warranted for conclusive GCS assessments.
Year:
2025
The FUTURE project aims to enhance seismic surveying in South African mining by integrating advanced acquisition technologies. In this paper, we detail surface and underground seismic surveys at the South Deep gold mine as part of the project. Surface seismic acquisition used co-located broadband micro-electromechanical sensors, one and three component recorders connected to geophones, distributed acoustic sensing using a straight fibre optic cable, along with a 6 ton broadband seismic vibrator operating with 4-180 Hz linear sweeps. In addition, underground surveys employed a combination of straight, and helically wound fibre optic cables, cabled-based and nodal sensors, along with a 500 kg drophammer mounted on a skid steer bobcat. The surface and underground seismic arrays were time synchronised using a GPS-time transmitter to allow for accurate seismic data recording in a GPS-denied environment. Results show the efficacy of these techniques in acquiring high-resolution seismic data, revealing detailed subsurface geological structures and mineralisation down to 3500 m below ground surface. Surface data revealed clear seismic reflections corresponding to the Black Reef and Ventersdorp Contact Reef. An underground P-wave velocity model exhibits low velocity anomalies that are associated with fracturing, while a P-wave reflection stack section shows significant reflections and a degree of faulting below the tunnel floor that was not observed on the surface reflection seismic data. We highlight the potential of these technologies to enhance safety, efficiency, and sustainability in mining. This study sets a benchmark for future reflection seismic surveys, paving the way for safer, more efficient, deep mineral exploration and extraction practices.
Year:
2025
Potential of multicomponent seismic surveys for direct targeting of metallic mineral deposits through reflection and diffraction imaging is studied in this work. The study site is at an iron-oxide deposit site in central Sweden, which has recently undergone extensive exploration work due to the increased global demand for iron ores as well as rare earth elements often associated with these deposits. The multicomponent survey consists of 150 3C recorders, connected to 10 Hz geophones with 10 m spacing. Alongside the 3C recording, a collocated broadband 1C microelectromechanical system-based survey also is conducted at every 5 m receiver spacing. The seismic source is a broadband vertical component vibrotruck, which generated three linear sweeps (2–200 Hz) at every 5 m. Given the low fold of 3C data set, we develop a processing workflow for P-P and S-S static corrections using the high-fold 1C broadband data set, which significantly improved the coherency of identified seismic features. We evaluate the final unmigrated stacks, where vertical component data indicate clear P-wavefield images of the known iron-oxide mineralization and two sets of crosscutting reflections. From the horizontal components, we are able to identify S-wavefield reflections from the mineralization only in the transverse component data. Moreover, in the transverse component data, we also identify a strong S-wavefield diffraction signal possibly indicating a magnetite-rich skarn deposit never imaged before nor in the vertical component data. We determine the value of multicomponent seismic technology for targeting large- and small-scale deposits and their potential to become a frequent part of mineral exploration workflow.
Year:
2025
The Kheis Tectonic Province of southern Africa represents a key, yet under-constrained, component in the tectonic history of the Kaapvaal Craton and its surrounding terranes. The complex geological framework is masked by extensive sedimentary cover and limited outcrop, making geophysical investigations essential. In this study, we present an integrated seismic analysis using the combination of a legacy deep reflection data (GS-02), a shallower reflection profile (KBF-01), teleseismic receiver functions, and refraction tomography to refine the crustal architecture and major tectonic boundaries across the region. Prestack time migration of the GS-02 profile reveals significant improvement in reflector clarity, enabling the identification of thrust faults, fold structures, and previously unresolved reflective packages. Refraction tomography constrains the thickness of the Kalahari Group cover, averaging ∼ 250 m, while receiver function analysis at three broadband seismic stations yields new Moho depth estimates ranging from 32 to 46 km and delineates crustal stratification. Our interpretation supports a model in which the Kaapvaal Craton is underthrusting westward beneath the Kheis Province, with partial crustal imbrication. We find no strong seismic evidence for the Dabep Thrust as a major tectonic boundary, aligning with recent challenges to its significance. In contrast, the Blackridge Thrust and the Kalahari Line show coherent seismic and geophysical expression, supporting their role as first-order structures. Additionally, we image a deeply buried, high-reflectivity zone in the west, suggestive of a possible plutonic body or relict basin structure. This multi-method seismic investigation advances the understanding of the crustal-scale structure and tectonic evolution of the Kheis Province, providing new constraints for regional tectonic models and highlighting the value of reinterpreting legacy seismic data with modern techniques.
Year:
2025
Year:
2025
Year:
2025
Year:
2025
Year:
2025
Year:
2025
Year:
2025
Year:
2025
Year:
2024
Year:
2024
Year:
2024
Year:
2023
Year:
2023
Year:
2023
Year:
2023
Year:
2023
Year:
2023
Year:
2023
Year:
2023
Year:
2022
Year:
2022
Collaborators (12)
Myrto Papadopoulou
Assistant Professor
Uppsala University
LAURA VALENTINA SOCCO
Full Professor
Delft University of Technology
Ole Rønø Clausen
VIP, Associate Professor
Aarhus University
Ayse Kaslilar
Uppsala University
Christopher Juhlin
Professor
Uppsala University
Junhyung Lee
-
Raymond Durrheim
Research Chair
University of Witwatersrand
Thomas Funck
Senior Research Scientist
Geological Survey of Denmark and Greenland
CHIARA COLOMBERO
Assistant Professor
Politecnico di Torino
ramon Carbonell
Professor of Research
-
Tae-Kyung Hong
Professor
Yonsei University
Magdalena Markovic
Assistant Professor
Uppsala University
Make your next move.
Prepare your application
Review drafts before you send them.