Dongwoo Yoo
Assistant Professor
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (3)
Patterning of silver nanoparticles (AgNPs) for high‐resolution and high‐conductivity electrodes is essential for high‐performance flexible electronic devices. AgNPs with sinster‐bridged conductive networks maintain high electrical conductivities even at fine features owing to their constant (i.e., size‐independent) percolation threshold, thereby enabling the fabrication of high‐resolution, high‐conductivity electrodes. However, patterning AgNP electrodes with high density using a facile, high‐quality, and highly efficient approach remains challenging. Therefore, this study developed two‐step annealing‐enhanced solvent‐free patterning of AgNPs using a UV‐curable pressure‐sensitive adhesive (PSA) film. The first annealing induces interfacial fusion between the AgNPs and the poly(1,1,2,2‐tetrafluoroethylene) (PTFE)‐coated substrate, converting point contacts into surface contacts while increasing the electrical conductivity through metallic bonding via sinter bridge formation. The second annealing allows the prepolymer adhesive to infiltrate voids between annealed AgNPs, creating mechanical interlocking after UV curing that significantly increases the work of fracture of the composite. This approach enables the formation of AgNP patterns without residues or loss, achieving critical dimensions down to 10 µm with excellent pattern fidelity. Moreover, the developed patterning technique simultaneously creates complementary patterns on both rigid and flexible films in a single process. Consequently, this study demonstrates applicability to flexible electronic devices, such as flexible heaters and a capacitive sensor array.
Year:
2025
3D flexible electrodes are essential to implement flexible pressure sensors in various flexible electronic applications. Conventional methods for fabricating these electrodes include electroless deposition, spray coating, and incorporating conductive nanomaterials into a polymer matrix. However, the electrodes fabricated using these methods are characterized by poor adhesion between the conductive layer and polymer surface and fail to maintain intrinsic mechanical properties of the polymer, such as elastic modulus and ductility. Herein, a transfer method in which conductive nanomaterials are embedded into the surface of polymer networks via optimal surface energy control is proposed, such as reducing adhesion between the mold and nanomaterials. This method induces mechanical interlocking between the surface of polymer networks and conductive nanomaterials, firmly anchoring them onto the polymer network surface. Moreover, the intrinsic mechanical properties of the fabricated 3D flexible electrodes remain unchanged. Flexible capacitive sensors prepared using the resulting electrodes exhibit a stable sensing performance (ΔC 0,5000 /C 0 = 0.169%) even under repetitive pressure conditions (5000 cycles at 70 kPa). The proposed robust 3D flexible electrode fabrication method presents a promising strategy for the future development of flexible pressure sensors.
Year:
2025
Stretchable electrodes have emerged as a promising technology for soft robotics and wearable devices. One fabrication method that guarantees sustained elasticity and high conductivity is directly filling or printing an elastic substrate with liquid metal (LM). However, it is difficult to create patterns with complex or 3D shapes, such as hole patterning, integration electrodes, and flexible breadboards. Therefore, a simple and effective patterning method for fabricating 3D stretchable electronics using LM electrodes is proposed in this study. The LM‐infused sponge electrode is fabricated by loading LM onto a polydimethylsiloxane (PDMS) sponge, which is fabricated using the salt‐leaching method in PDMS patterned by replica molding. The LM‐infused sponge electrode exhibits a minimal change in terms of resistivity under strain, bending, and twisting (∆R < 0.01 Ω cm −1 ). This enables various devices to be driven by the production of flexible breadboards, which makes it possible to integrate the proposed model into commercial electronics. Finally, a stretchable tactile sensor (self‐capacitive and self‐powered) is fabricated by integrating stretchable electrodes using only the LM‐infused sponges. In the future, stretchable electrodes fabricated in this manner can be used in various applications, such as soft robots and wearable devices.
Year:
2024
Collaborators (2)
Jongkyeong Lim
Assistant Professor
Gachon University
Joonwon Kim
Professor
Pohang University of Science and Technology
Make your next move.
Prepare your application
Review drafts before you send them.