Joonwon Kim

Professor

Pohang University of Science and Technology
Country flagSouth Korea

Research Interests

ApplyKite TwinLearns as you apply

Make your next move.

Prepare your application

Review drafts before you send them.

Explore related searches

Articles (5)

Year:

2026

Fluorescence imaging is a powerful technique widely used in biomedical diagnostics due to its high sensitivity and specificity in detecting biomolecular targets. However, conventional fluorescence imaging systems are typically expensive, bulky, and restricted to centralized laboratory settings, limiting their use in point‐of‐care and resource‐limited environments. This study presents a standalone, cost‐effective fluorescence detection platform developed from a repurposed smartphone and integrated with a custom mobile application for automated image acquisition, signal processing, and quantitative analysis. Quantitative image processing, including region‐of‐interest extraction and histogram‐based intensity measurement, was performed directly on the smartphone. The smartphone‐based measurements showed strong correlation with microscope data, with Spearman rank coefficients of 0.924 (4× objective) and 0.912 (10× objective), indicating high agreement in signal trends across both systems. This work demonstrates the feasibility of repurposing outdated smartphones to develop a fluorescence detection platform with measurement capabilities comparable to conventional fluorescence microscopes. Despite the absence of complex mechanical components such as translation stages and the use of only simplified optical elements, the system retains sufficient analytical performance for potential use in field‐deployable diagnostics and decentralized healthcare applications.

Year:

2026

Patterning of silver nanoparticles (AgNPs) for high‐resolution and high‐conductivity electrodes is essential for high‐performance flexible electronic devices. AgNPs with sinster‐bridged conductive networks maintain high electrical conductivities even at fine features owing to their constant (i.e., size‐independent) percolation threshold, thereby enabling the fabrication of high‐resolution, high‐conductivity electrodes. However, patterning AgNP electrodes with high density using a facile, high‐quality, and highly efficient approach remains challenging. Therefore, this study developed two‐step annealing‐enhanced solvent‐free patterning of AgNPs using a UV‐curable pressure‐sensitive adhesive (PSA) film. The first annealing induces interfacial fusion between the AgNPs and the poly(1,1,2,2‐tetrafluoroethylene) (PTFE)‐coated substrate, converting point contacts into surface contacts while increasing the electrical conductivity through metallic bonding via sinter bridge formation. The second annealing allows the prepolymer adhesive to infiltrate voids between annealed AgNPs, creating mechanical interlocking after UV curing that significantly increases the work of fracture of the composite. This approach enables the formation of AgNP patterns without residues or loss, achieving critical dimensions down to 10 µm with excellent pattern fidelity. Moreover, the developed patterning technique simultaneously creates complementary patterns on both rigid and flexible films in a single process. Consequently, this study demonstrates applicability to flexible electronic devices, such as flexible heaters and a capacitive sensor array.

Year:

2025

3D flexible electrodes are essential to implement flexible pressure sensors in various flexible electronic applications. Conventional methods for fabricating these electrodes include electroless deposition, spray coating, and incorporating conductive nanomaterials into a polymer matrix. However, the electrodes fabricated using these methods are characterized by poor adhesion between the conductive layer and polymer surface and fail to maintain intrinsic mechanical properties of the polymer, such as elastic modulus and ductility. Herein, a transfer method in which conductive nanomaterials are embedded into the surface of polymer networks via optimal surface energy control is proposed, such as reducing adhesion between the mold and nanomaterials. This method induces mechanical interlocking between the surface of polymer networks and conductive nanomaterials, firmly anchoring them onto the polymer network surface. Moreover, the intrinsic mechanical properties of the fabricated 3D flexible electrodes remain unchanged. Flexible capacitive sensors prepared using the resulting electrodes exhibit a stable sensing performance (ΔC 0,5000 /C 0 = 0.169%) even under repetitive pressure conditions (5000 cycles at 70 kPa). The proposed robust 3D flexible electrode fabrication method presents a promising strategy for the future development of flexible pressure sensors.

Year:

2025

A closed and open hybrid microfluidic platform enables high-throughput reliable fabrication of supraparticles using low volatile/water-soluble oil within 20 min.

Year:

2023

Collaborators (2)

Dongwoo Yoo

Assistant Professor

Kongju National University

SOUTH KOREA
View details

Wonhyung Lee

Assistant Professor

Kumoh National Institute of Technology

SOUTH KOREA
View details