Dukhyun Choi
Research Interests
Make your next move.
Prepare your application
Review drafts before you send them.
Explore related searches
Articles (9)
Sodium‐ion batteries (SIBs) have the potential to be a cost‐effective and sustainable solution for large‐scale energy storage systems (ESSs) due to the abundance of sodium reserves. Na 2 Ti 6 O 13 has been considered as a suitable candidate for use as an anode material in SIBs owing to its environmental friendliness, low cost, and excellent cycling stability. Despite its advantages, Na 2 Ti 6 O 13 has intrinsic limitations such as electrical conductivity. To overcome these obstacles, a sandwich‐structured Na 2 Ti 6 O 13 /reduced graphene oxide (rGO) composite is synthesized through a liquid‐phase exfoliation and restacking method using electrostatic interactions. The Na 2 Ti 6 O 13 /rGO composite showed remarkable improvement in both reversible discharge capacity and cycle stability. In comparison to bare Na 2 Ti 6 O 13 with a discharge capacity of 20.1 mAh g −1 after 500 cycles, the Na 2 Ti 6 O 13 /rGO1 composite displayed a discharge capacity of 196.5 mAh g −1 at a current density of 0.1 A g −1 and a voltage range of 0.01–2.5 V. Furthermore, the Na 2 Ti 6 O 13 /rGO1||Na 3 V 2 (PO 4 ) 3 full cell are assembled, discharging an energy density of 251.3 Wh kg −1 anode with a power density of 228.1 W kg −1 anode after 100 cycles in a voltage range of 1.0–4.0 V.
Year:
2025
Self‐powered flexible thermal‐management systems have garnered interests in wearable electronic devices and AI semiconductors. However, their efficiency and reliability remain limited in practical applications. In this study, an ionic temperature‐sensing triboelectric nanogenerator (iTS‐TENG) is proposed with an ionic elastomer containing thermoplastic polyurethane (TPU) and ionic liquids (ILs). The TPU matrix undergoes deformation of microphase separation by thermal stimulation near the glass transition temperature. Furthermore, ILs facilitate the formation of electrical double layers as charge carriers and enhance the thermal sensitivity as heat carriers under mechanical and thermal stimuli. Thus, iTS‐TENG demonstrates enhanced outputs (734 V) and high thermal sensitivity (3.87 V/°C) from room temperature to 70 °C, with fast response time and reproducibility (more than 20 cycles). Finally, real‐time and self‐powered iTS‐TENG is demonstrated, showing that the sensed temperature is comparable to a commercial temperature sensor. These results indicate that iTS‐TENG is suitable for thermal‐management applications in self‐powered wearable electronic systems.
Year:
2025
At present, the output power density of nanogenerators (NGs) is insufficient to meet the substantial energy demands of many electronic devices, which significantly limits their further development in energy-harvesting applications. Therefore, optimizing the output performance of NGs is crucial for their advancement. This article focuses on the underlying principles and representative examples of nanogenerators, particularly those developed from nano- or microscale functional materials and utilized as nano- or micro-power sources. We introduce the fabrication and assembly of nanowire-based NGs, with an emphasis on materials such as zinc oxide (ZnO), gallium nitride (GaN), aluminum nitride (AlN), and Nylon-11 in terms of piezoelectric nanogenerators (PENGs) and triboelectric nanogenerators (TENGs). Additionally, we show fiber-based NGs incorporating materials such as poly(vinylidene fluoride) (PVDF), its copolymer poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)), and poly(vinylidene fluoride- co -hexafluoropropylene) (P(VDF-HFP) in applications, such as yarns and textiles. Methods for surface modification and dielectric property control are discussed as strategies for optimizing the electrical energy output at the nano- or microscale. Furthermore, ZnO-based PENGs and cellulose-based TENGs are introduced as potential nano- or micro-power sources. Innovative applications such as flame-retardant textile TENGs, pyroelectric NGs, and implantable TENGs (iTENGs) for pacemakers are also discussed. Graphical abstract Nano- or microscale functional materials and optimized surface modification/control are the key to achieving nanogenerators as nano- or micro-power sources for next-generation Internet of Things (IoT)/wearable electronics.
Year:
2025
This paper presents an integrated power generation, conversion, and storage system with a temperature monitoring system, including passive near‐field communication (PGCS‐TMS‐pNFC), based on triboelectric nanogenerators (TENGs). The system consists of three parts; first, a mechanical regulation system (MRS) with kinematic design and multiphase control; second, a phase control rectifying circuit (PCRC) with a battery charging circuit (BCC); and third, a data processing and communication system (TMS‐pNFC) for low power consumption. The MRS, consisting of a reel spring and gear train, achieves a high‐frequency output exceeding 1000 Hz, and long‐lasting operation. PCRC provides stable and minimizing fluctuated DC output with a ripple effect as RMS voltage and current of 423 V and 46 µA, for 2 s, with a crest factor of 1.15 and 1.08. The PGCS‐TMS‐pNFC, harvesting building energy, such as opening and closing doors, is used to sense and store temperature data for more than 29 min, and the data is transmitted to the receiver via pNFC through smartphone tagging. Additionally, the PGCS with BCC is implemented on a bicycle frame to charge electronic devices while riding. This research underscores the integrated approach and practical applications of TENG technology that contribute to energy efficiency and sustainability in the lives.
Year:
2024
In the realm of intelligent sports, the integration of triboelectric nanogenerators (TENGs) marks a transformative approach toward energy sustainability and more advanced athletic monitoring. By leveraging the principle of triboelectricity, TENGs ingeniously convert mechanical energy from athletes’ movements into electrical energy, which offers a green and efficient power solution for wearable technology. This paper presents an innovative study on the application of TENG technology in sports science, with the results illustrating the potential utility of TENGs in revolutionizing the way we monitor, analyze, and enhance athletic performance. Through the development of self-powered wearables and equipment, TENGs facilitate real-time data collection on physiological and biomechanical parameters, ultimately enabling personalized training adjustments and injury prevention strategies. Our findings underscore the dual benefit of TENGs in promoting environmental sustainability by reducing the overall reliance on traditional energy sources and growing the capabilities of intelligent sports systems. This research contributes to the burgeoning field of nano-energy sports applications while setting the stage for future explorations into the optimization of TENG integration in athletic performance enhancement. Finally, the paper concludes by discussing remaining challenges in this area and opportunities for further research.
Year:
2024
A magnetic alloy film/graphite composite is developed for shielding electromagnetic waves in the X-band and extremely low frequency regimes, using a scalable electrodeposition process. Enhanced thermal and mechanical properties are also achieved.
Year:
2024
Accurately predicting the distance an object will travel to its destination is very important in various sports. Acceleration sensors as a means of real-time monitoring are gaining increasing attention in sports. Due to the low energy output and power density of Triboelectric Nanogenerators (TENGs), recent efforts have focused on developing various acceleration sensors. However, these sensors suffer from significant drawbacks, including large size, high complexity, high power input requirements, and high cost. Here, we described a portable and cost-effective real-time refreshable strategy design comprising a series of individually addressable and controllable units based on TENGs embedded in a flexible substrate. This results in a highly sensitive, low-cost, and self-powered acceleration sensor. Putting, which accounts for nearly half of all strokes played, is obviously an important component of the golf game. The developed acceleration sensor has an accuracy controlled within 5%. The initial velocity and acceleration of the forward movement of a rolling golf ball after it is hit by a putter can be displayed, and the stopping distance is quickly calculated and predicted in about 7 s. This research demonstrates the application of the portable TENG-based acceleration sensor while paving the way for designing portable, cost-effective, scalable, and harmless ubiquitous self-powered acceleration sensors.
Year:
2024
Accurately predicting the distance an object will travel to its destination is very important in various sports. Acceleration sensors as a means of real-time monitoring are increasingly gaining increasing attention in sports. Due to the low energy output and power density of Triboelectric Nanogenerators (TENGs), recent efforts have focused on developing various acceleration sensors. However, these sensors suffer from significant drawbacks of large size, complexity, high power input requirements, and high cost. Here, we described a portable and cost-effective real-time refreshable strategy design comprising a series of individually addressable and controllable units based on TENGs embedded in a flexible substrate. This results in a highly sensitive, low-cost, and self-powered acceleration sensor. Putting, which accounts for nearly half of the strokes played, is obviously an important component of the golf game. The developed acceleration sensor has an accuracy controlled within 5 %. The initial velocity and acceleration of the forward movement of a rolling golf ball after it is hit by a putter can be displayed, and the stopping distance quickly calculated and predicted in about 7 seconds. This research demonstrates the application of the portable TENG-based acceleration sensor, while paving the way for designing portable, cost-effective, scalable, and harmless ubiquitous self-powered acceleration sensors.
Year:
2024
The field of transportation plays a crucial role in the development of society. It is vital to establish a smart transportation system to increase the convenience and security of human life. The incorporation of artificial intelligence and the internet of things into the traffic system has facilitated the emergence of innovative technologies like autonomous vehicles or unmanned aerial vehicles, which contribute to the reduction of traffic accidents and the liberation of human driving time. However, this improvement involves the use of multiple sensor devices that need external power sources. As a result, pollution occurs, as do increases in manufacturing costs. Therefore, the quest to develop sustainable energy remains a formidable obstacle. Triboelectric nanogenerators (TENGs) have emerged as a possible solution for addressing this problem owing to their exceptional performance and simple design. This article explores the use of TENG-based self-power sensors and their potential applications in the field of transportation. Furthermore, the data collected for this study might aid readers in enhancing their comprehension of the benefits linked to the use of these technologies to promote their creative ability.
Year:
2024
Collaborators (4)
Sang-Woo Kim
YONSEI Lee Youn Jae World-Class Fellow Professor
Yonsei University
Joohoon Kang
Associate Professor
Yonsei University
Jongsik Kim
-
Hee Jae Hwang
Professor
Kumoh National Institute of Technology
Make your next move.
Prepare your application
Review drafts before you send them.